HTC Corporation 2QCD100 Charging Tracker USB Type-C cable User Manual

HTC 2QCD100 Charging Tracker USB Type-C cable

Product Information

The Feinctaition Tracker/Dongle (2QBP100) is a device that allows for motion tracking in virtual reality headsets. It consists of a tracker, a dongle, and a camera. The tracker (2QBP100) features a power button, a status light, POGO pin, and a USB Type-C port. The dongle (2QCD100) is used for connecting the tracker to the headset.

Tracker (2QBP100)

• Power button: Used to turn the tracker on and off.
• Status light: Indicates the current status of the tracker.
• POGO pin: Allows for charging the tracker.
• USB Type-C port: Used for connecting the tracker to a computer or power adapter for charging.

Dongle (2QCD100)

• Used for connecting the tracker to the headset.
• Dongle cradle: Provides a stable platform for the dongle.
• Camera (2QCD100): Assists in motion tracking.

Product Usage Instructions

1. To charge the tracker, connect one end of the USB Type-C cable to the tracker and the other end to your computer. Alternatively, you can use a power adapter with the USB Type-C cable. The status light will indicate when the tracker is fully charged.
2. To turn on the tracker, briefly press the power button. The status light will turn blue. To turn it off, press and hold the power button for 5 seconds.
3. To use the tracker with the headset, follow these steps:
4. Connect the dongle to the USB-C port on the headset.
5. From your VR headset, turn on Wi-Fi and go to Settings > inputs > Motion Trackers.
6. Pair the new device by following the on-screen instructions.
7. Press the tracker power button for 2 seconds. The status light will blink blue.
8. Wait for the status light to turn green or blink red/green, indicating a successful pairing.

Status Light Indications

• Solid amber: Tracker is fully charged.
• Blinking blue: Tracker is in pairing mode.
• Blinking red: Battery is low.
• Solid green: Tracker is connected.

About the Tracker

1. Tracker (2QBP100)
2. Power button
3. Status light
4. POGO pin
5. USB Type-C port
6. Dongle (2QCD100)
7. Dongle cradle
8. Camera

Charging Tracker

• Charging Tracker using the USB Type-C cable that came in the box.
• Connect one end of the USB Type-C cable to Tracker and the other end to your computer.
• When Tracker is fully charged, status light will go back to the previous status.
• You can also use a power adapter with the USB Type-C cable to charge Tracker.

Turning Tracker on or off

• To turn Tracker on, brief press the POWER button. The status light will turn blue.
• To turn Tracker off, press the POWER button for 5 seconds.

Using the dongle and pairing Tracker

The dongle needs to be connected to the headset for Tracker to be tracked.

Connect the dongle to your headset

1. Connect the dongle to headset USB-C port.
2. From your VR headset, turn on Wi-Fi, then go to Settings > inputs > Motion Trackers, pair new device.
3.  Press the Tracker POWER button for 2 seconds. The status light will blink blue.
4. Wait for the status light to turn green or blink red/green. This means pairing is successful.

Status light

• Charging Solid amber
• Fully charged Back to the previous status
• Pairing mode Blinking blue
• Battery low Blinking red
• Connected Solid green

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>