VESTEL 50Q9700TT Ultra HD 4K TV Instruction Manual

January 18, 2024
VESTEL

50Q9700TT Ultra HD 4K TV

Product Information

Specifications

  • Model: [Model Name]
  • Screen Size: [Screen Size]
  • Resolution: [Resolution]
  • Display Technology: [Display Technology]
  • Audio Technology: [Audio Technology]
  • Connectivity: [Connectivity Options]
  • Power Consumption: [Power Consumption]

Safety Information

CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN

To reduce the risk of electric shock, do not remove the cover or
back of the TV. There are no user-serviceable parts inside. Please
refer to qualified service personnel for servicing.

During extreme weather conditions such as storms or lightning,
and during long periods of inactivity such as going on holiday, it
is recommended to disconnect the TV set from the mains.

The mains plug is used to disconnect the TV set from the mains,
and it should always remain readily operable. Even if the TV is in
standby mode or switched off, it may still draw power if not
disconnected electrically.

Important Maintenance Instructions

Ensure the TV is kept out of the reach of babies, children, and
domestic animals.

Never allow anyone, especially children, to push or hit the
screen or insert anything into holes, slots, or any other openings
in the TV.

Markings on the Product

The product may have various symbols and markings that indicate
restrictions, precautions, and safety instructions. Please refer to
these markings for security reasons.

  • Class II Equipment: This appliance does not require a safety
    connection to electrical earth.

  • Hazardous Live Terminal: Marked terminal(s) may be hazardous
    when live under normal operating conditions.

  • Caution, See Operating Instructions: Marked area(s) contain
    user-replaceable coin or button cell batteries. Refer to the
    operating instructions for replacement.

  • CLASS 1 LASER PRODUCT: The product contains a Class 1 laser
    source that is safe under normal operation.

Product Usage Instructions

Stand Installation & Wall Mounting

Assembling / Removing the Pedestal

1. Take out the pedestal(s) and the TV from the packing
case.

2. Place the TV onto a work table with the screen panel facing
down on a clean and soft cloth.

3. Align the pedestal(s) with the mounting pattern(s) on the
rear side of the TV.

4. Securely attach the pedestal(s) to the TV using the provided
screws.

Preparations

Before installing or operating the TV, please ensure you have
read and understood all the instructions provided in this
manual.

FAQ

Q: Can I leave the TV connected to the mains during extreme

weather conditions?

A: No, it is recommended to disconnect the TV set from the mains
during extreme weather conditions such as storms or lightning to
reduce the risk of electric shock.

Q: Are there any user-serviceable parts inside the TV?

A: No, there are no user-serviceable parts inside the TV. Please
refer to qualified service personnel for servicing.

Q: Can I mount the TV on the wall?

A: Yes, the TV can be mounted on the wall. Please refer to the
wall mounting instructions provided in this manual.

Table of Contents
Safety Information …………………………………………. 2 Accessories Included …………………………………….. 4 Features ………………………………………………………. 4 Stand Installation & Wall Mounting ………………….. 5 Antenna Connection………………………………………. 5 Other Connections ………………………………………… 6 Turning On/Off the TV ……………………………………. 7 TV Control & Operation………………………………….. 7 Remote Control …………………………………………….. 8 Initial Setup Wizard ……………………………………….. 9 Home Screen ……………………………………………… 11 Live TV Mode Menu Content ………………………… 12
Channels ………………………………………………..12 TV Options……………………………………………….12 Record …………………………………………………….14 Settings ……………………………………………………… 14 Network & Internet…………………………………….14 Channel …………………………………………………..14 Accounts & Sign In ……………………………………17 Apps ……………………………………………………….17 Device Preferences …………………………………..17 Channel List ……………………………………………….. 22 Programme Guide……………………………………….. 22 Connecting to the Internet…………………………….. 23 Multi Media Player……………………………………….. 24 From USB Connection……………………………….26 USB Auto Play Feature………………………………26 USB Recording …………………………………………… 26 Instant Recording ……………………………………..27 Watching Recorded Programmes ………………27 Timeshift Recording…………………………………..27 Disk Format ……………………………………………..27 Schedule List ……………………………………………27 CEC…………………………………………………………… 27 Google Cast ……………………………………………….. 28 HBBTV System …………………………………………… 29 Quick Standby Search …………………………………. 29 Software Update …………………………………………. 29 Troubleshooting & Tips ………………………………… 29 HDMI Signal Compatibility ……………………………. 30 Supported File Formats for USB Mode …………… 31 Video Decoder………………………………………….31 Video Encoder ………………………………………….32 Audio ………………………………………………………32

Picture …………………………………………………….34 Subtitle…………………………………………………….34 Specification……………………………………………….. 36
Licences …………………………………………………….. 37

English – 1 –

Safety Information
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mains.
The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. If the TV set is not disconnected electrically from the mains, the device will still draw power for all situations even if the TV is in standby mode or switched off.
Note: Follow the on screen instructions for operating the related features.
IMPORTANT – Please read these instructions fully before installing or operating
WARNING: This device is intended to be used by persons (including children) who are capable / experienced of operating such a device unsupervised, unless they have been given supervision or instruction concerning the use of the device by a person responsible for their safety. · Use this TV set at an altitude of less than 5000 metres
above the sea level, in dry locations and in regions with moderate or tropical climates. · The TV set is intended for household and similar indoor use but may also be used in public places. · For ventilation purposes, leave at least 5cm of free space around the TV. · The ventilation should not be impeded by covering or blocking the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. · The power cord/plug should be easily accessible. Do not place the TV, furniture, etc. on the power cord. A damaged power cord/plug can cause fire or give you an electric shock. Handle the power cord by the plug, do not unplug the TV by pulling the power cord. Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock. Never make a knot in the power cord or tie it with other cords. When damaged it must be replaced, this should only be done by qualified personnel. · Do not expose the TV to dripping or splashing of liquids and do not place objects filled with liquids, such as vases, cups, etc. on or over the TV (e.g. on shelves above the TV).

· Do not expose the TV to direct sunlight or do not place open flames such as lit candles on the top of or near the TV.
· Do not place any heat sources such as electric heaters, radiators, etc. near the TV set.
· Do not place the TV on the floor or inclined surfaces. · To avoid danger of suffocation, keep plastic bags
out of the reach of babies, children and domestic animals.
· Carefully attach the stand to the TV. If the stand is provided with screws, tighten the screws firmly to prevent the TV from tilting. Do not over-tighten the screws and mount the stand rubbers properly.
· Do not dispose of the batteries in fire or with hazardous or flammable materials.
WARNING
· Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
· Excessive sound pressure from earphones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the TV.

Caution

Serious injury or death risk

Risk of electric shock Dangerous voltage risk

Maintenance

Important maintenance component

Markings on the Product

The following symbols are used on the product as
a marker for restrictions and precautions and safety
instructions. Each explanation shall be considered where the product bears related marking only. Note such information for security reasons.

Class II Equipment: This appliance is designed in such a way that it does not require a safety connection to electrical earth.

Hazardous Live Terminal: The marked terminal(s) is/are hazardous live under normal operating conditions.

i Caution, See Operating Instructions: The marked area(s) contain(s) user replaceable coin or button cell batteries.

CLASS 1 LASER PRODUCT

Class 1 Laser Product: This product contains Class 1 laser source that is safe under reasonably foreseeable conditions of operation.

English – 2 –

WARNING
Do not ingest the battery, Chemical Burn Hazard This product or the accessories supplied with the product may contain a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ A television may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: · ALWAYS use cabinets or stands or mounting
methods recommended by the manufacturer of the television set. · ALWAYS use furniture that can safely support the television set. · ALWAYS ensure the television set is not overhanging the edge of the supporting furniture. · ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls. · ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed. · NEVER place a television set in an unstable location. · NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. · NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture. · NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed. · The equipment is only suitable for mounting at heights 2 m. If the existing television set is going to be retained and relocated, the same considerations as above should be applied.
­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ Apparatus connected to the protective earthing of the building installation through the MAINS connection or through other apparatus with a connection to protective earthing ­ and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range
(galvanic isolator).

WALL MOUNTING WARNINGS
· Read the instructions before mounting your TV on the wall.
· The wall mount kit is optional. You can obtain from your local dealer, if not supplied with your TV.
· Do not install the TV on a ceiling or on an inclined wall.
· Use the specified wall mounting screws and other accessories.
· Tighten the wall mounting screws firmly to prevent the TV from falling. Do not over-tighten the screws.
Figures and illustrations in these operating instructions are provided for reference only and may differ from the actual product appearance. Product design and specifications may be changed without notice.

English – 3 –

Introduction
Thank you for choosing our product. You’ll soon be enjoying your new TV. Please read these instructions carefully. They contain important information which will help you get the best from your TV and ensure safe and correct installation and operation.
Accessories Included
· Remote Control · Batteries: 2 x AAA · Operating Instructions · Power Cord
Features
· Remote controlled colour TV · AndroidTM operating system · Google Cast · Voice Search (optional) · Fully integrated digital terrestrial/cable/satellite TV
(DVB-T-T2/C/S2)
· HDMI inputs to connect other devices with HDMI sockets
· USB input · Stereo sound system · Teletext · Headphone connection · Automatic programming system · Manual tuning · Sleep timer · On/Off timer · Switch off timer · Picture off function · No signal auto power off function · Ethernet (LAN) for Internet connectivity and service
· 802.11 a/b/g/n/ac built in WLAN Support · HbbTV Ultra HD (UHD) The TV supports Ultra HD (Ultra High Definition – also known as 4K) which provides resolution of 3840 x 2160 (4K:2K). It equals 4 times the resolution of Full HD TV by doubling the pixel count of the Full HD TV both horizontally and vertically. Ultra HD content is supported via native and market applications, HDMI, some of the Over-the-Top (OTT) services, USB inputs and over DVB-T2 and DVB-S2 broadcasts.

High Dynamic Range (HDR) / Hybrid LogGamma (HLG)
Using this feature the TV can reproduce greater dynamic range of luminosity by capturing and then combining several different exposures. HDR/HLG promises better picture quality thanks to brighter, more realistic highlights, more realistic colour and other improvements. It delivers the look that filmmakers intended to achieve, showing the hidden areas of dark shadows and sunlight with full clarity, colour and detail. HDR/HLG content is supported via native and market applications, HDMI, USB inputs and over DVB-S broadcasts. When the input source is set to the related HDMI input press the Menu button and set the HDMI EDID Version option in the TV Options>Settings>Device Preferences>Inputs menu as EDID 2.0 or Auto EDID in order to watch HDR/HLG content, if the HDR/HLG content is received through an HDMI input. The source device should also be at least HDMI 2.0a compatible in this case.
Dolby Vision
Dolby VisionTM delivers a dramatic visual experience, astonishing brightness, exceptional contrast, and vivid colour, that brings entertainment to life. It achieves this stunning image quality by combining HDR and wide colour gamut imaging technologies. By increasing the brightness of the original signal and using a higher dynamic colour and contrast range, Dolby Vision presents amazing true-to-life images with stunning detail that other post-processing technologies in the TV aren’t able to produce. Dolby Vision is supported via native and market applications, HDMI and USB inputs. When the input source is set to the related HDMI input press the Menu button and set the HDMI EDID Version option in the TV Options>Settings>Device Preferences>Inputs menu as EDID 2.0 or Auto EDID in order to watch Dolby Vision content, if the Dolby Vision content is received through an HDMI input. The source device should also be at least HDMI 2.0a compatible in this case. In the Picture Mode menu three predefined picture modes will be available if Dolby Vision content is detected: Dolby Vision Bright, Dolby Vision Dark and Dolby Vision Vivid. All allow the user to experience the content in the way the creator originally intended with different ambient lighting conditions. To change the Picture Mode setting press the Menu button while watching the Dolby Vision content and go to Picture menu. While watching Dolby Vision Content via an application, except YouTube, Netflix and Multi Media Player, you will not be able to access the Picture menu and set the Picture Mode.

English – 4 –

Stand Installation & Wall Mounting
Assembling / Removing the pedestal
Preparations
Take out the pedestal(s) and the TV from the packing case and put the TV onto a work table with the screen panel down on a clean and soft cloth (blanket, etc.).
· Use a flat and firm table bigger than the TV. · Do not hold the screen panel part. · Make sure not to scratch or break the TV. Assembling the pedestal
1. Place the pedestal(s) on the mounting pattern(s) on the rear side of the TV.
2. Insert the screws provided and tighten them gently until the pedestal(s) is/are properly fitted.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall mount bracket or repacking the TV.
· Put the TV onto a work table with the screen panel down on a clean and soft cloth. Leave the pedestal(s) protruding over the edge of the surface.
· Unscrew the screws that fix the pedestal(s). · Remove the pedestal(s). When using the wall mount bracket
Your TV is also prepared for a VESA-compliant wall mount bracket. If it is not supplied with your TV, contact your local dealer to purchase the recommended wall mount bracket.
Holes and measurements for the wall mount bracket installation;

Antenna Connection
Connect the aerial or cable TV plug to the aerial input (ANT) socket or satellite plug to the satellite input (LNB) socket located on the rear-left side of the TV. Rear-left side of the TV
ANT
LNB
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. After the connection is done, you can turn on the units and use them.

W H

VESA WALL MOUNT MEASUREMENTS

Hole Pattern

W

H

Sizes (mm)

200

200

Screw Sizes

min. (mm)

10

Length (X)

max. (mm)

13

Thread (Y)

M6

English – 5 –

Other Connections
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. After the connection is done, you can turn on the units and use them.

Connector

Type

HDMI Connection

SPDIF

SPDIF (Optical Out) Connection

HEADPHONE

Headphone Connection

USB Connection

LAN

CI Connection
Ethernet Connection

Cables LAN / Ethernet Cable

Device

When using the wall mounting kit (contact your dealer to purchase one, if not supplied), we recommend that you plug in all cables before mounting the TV on the wall. Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings. The USB inputs on the TV support devices up to 500mA. Connecting devices that have current value above 500mA may damage your TV. When connecting equipment using a HDMI cable to your TV, to guarantee sufficient immunity against parasitic frequency radiation and trouble-free transmission of high definition signals, such as 4K content, you have to use a high speed shielded (high grade) HDMI cable with ferrites.

English – 6 –

Turning On/Off the TV
Connect power
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.

not a malfunction, it meets the requirements for energy consumption. In order to minimise energy consumption switch your TV into standby mode as explained above.
TV Control & Operation

The control button allows you to control the Quick Standby-On function of the TV.
Note: The position of the control button may differ depending on the model.

Plug one end (the two-hole plug) of the supplied detachable power cord into the power cord inlet on the rear side of the TV as shown above. Then plug the other end of the power cord into the mains socket outlet. The TV will switch on automatically. Note: The position of the power cord inlet may differ depending on the model.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights up. To switch on the TV from standby mode either:
· Press the Standby button on the remote control. · Press the control button on the TV. The TV will then switch on.
To switch the TV into standby
The TV cannot be switched into standby mode via control button. Press and hold the Standby button on the remote control. Power off dialogue will appear on the screen. Highlight OK and press the OK button. The TV will switch into standby mode.
To switch off the TV To power down the TV completely, unplug the power cord from the mains socket.
Quick Standby Mode
In order to switch the TV into quick standby mode either;
· Press the Standby button on the remote. Press again to go back to operating mode.

To turn the TV off (Quick Standby): Press the control button to turn the TV into quick standby mode.
To turn the TV off (Standby): The TV cannot be switched into standby mode via control button.
To turn on the TV: Press the control button, the TV will turn on.
Note: Live TV settings menu OSD in Live TV mode cannot be displayed via the control button.
Operation with the Remote Control
Press the Menu button on your remote control to display Live TV settings menu when in Live TV mode. Press Home button to display or return to the Home Screen of the Android TV. Use the directional buttons to move the focus, proceed, adjust some settings and press OK to make selections in order to make changes, set your preferences, enter a sub-menu, launch an application, etc. Press Back/Return to return to the previous menu screen.
Input Selection
Once you have connected external systems to your TV, you can switch to different input sources. Press the Source button on your remote control consecutively or use the directional buttons and then press the OK button to switch to different sources when in Live TV mode. Or enter the Inputs menu on the Home Screen, select the desired source from the list and press OK.
Changing Channels and Volume
You can adjust the volume by using the Volume +/- buttons and change the channel in Live TV mode by using the Programme +/- buttons on the remote.

· Press the control button on the TV.

Press the control button again to go back to operating mode.

Your TV continues to operate in the quick standby mode state, as it regularly checks for updates. This is

English – 7 –

Remote Control
28 27
MENU
TEXT
Inserting the Batteries into the Remote The remote may have a screw that secures the battery compartment cover onto the remote control (or this may be in a separate bag). Remove the screw, if the cover is screwed on previously. Then remove the battery compartment cover to reveal the battery compartment. Insert two 1.5V – size AAA batteries. Make sure the (+) and (-) signs match (observing correct polarity). Do not mix old and new batteries. Replace only with same or equivalent type. Place the cover back on. Secure the cover again with the screw, if any. To pair remote with the TV When the TV is turned on for the first time, a search for accessories will be performed after the initial setup starts. You will need to pair your remote control with your TV at this point. Press and hold the Source button on the remote until the LED on the remote starts to blink, then release the Source button. That means the remote is in pairing mode. Now you will wait for the TV to find your remote. Select the name of your remote and press OK when it appears on the TV screen. When the pairing process is successful, the LED on the remote will go off. If the pairing process fails the remote will enter sleep mode after 30 seconds. In order to pair your remote later on, you can go to Settings menu, highlight Remotes & Accessories option and press OK to start a search for accessories.

1. Standby: Quick Standby / Standby / On 2. Numeric buttons: Switches the channel in Live TV
mode, enters a number or a letter in the text box on the screen 3. Language: Switches among sound modes (analogue TV), displays and changes audio language (digital TV, where available) 4. Volume +/5. Microphone: Activates the microphone on the remote 6. Home: Opens the Home Screen 7. Guide: Displays the electronic programme guide in Live TV mode 8. OK: Confirms selections, enters sub-menus, views channel list (in Live TV mode) 9. Back/Return: Returns to previous menu screen, goes one step back, closes open windows, closes teletext (in Live TV-Teletext mode) 10. Netflix: Launches the Netflix application 11. Prime Video: Launches the Amazon Prime Video application 12. Menu: Displays Live TV Settings menu (in Live TV mode), displays available setting options such as sound and picture 13. Coloured Buttons: Follow the on-screen instructions for coloured button functions 14. Rewind: Moves frames backwards in media such as movies 15. Stop: Stops the media being played 16. Record: Records programmes in Live TV mode 17. Pause: Pauses the media being played, starts timeshift recording in Live TV mode Play: Starts to play selected media 18. Text: Opens and closes teletext (where available in Live TV mode) 19. Fast forward: Moves frames forward in media such as movies 20. Source: Shows all available broadcast and content sources, is also used in pairing process of the remote. 21. Google Play: Launches the Google Play Store application 22. YouTube: Launches the YouTube application 23. Exit: Closes and exits from Live TV Settings menus, closes the Home Screen, exits from any running application or menu or OSD banner, switches to last set source 24. Directional buttons: Navigates menus, setting options, moves the focus or cursor, etc. sets record time and displays the subpages in Live TV-Teletext mode when pressed Right or Left. Follow the on-screen instructions. 25. Info: Displays information about on-screen content 26. Programme +/-: Increases/Decreases channel number in Live TV mode 27. Mute: Completely turns off the volume of the TV 28. Subtitles: Turns subtitles on and off (where available)
Standby Button
Press and hold the Standby button on the remote control. Power off dialogue will appear on the screen. Highlight OK and press the OK button. The TV will switch into standby mode. Press briefly and release to switch the TV into quick standby mode or to switch on the TV when in quick standby or standby mode.

English – 8 –

Initial Setup Wizard
Note: Follow the on-screen instructions to complete the initial setup process. Use the directional buttons and the OK button on the remote to select, set, confirm and proceed.
When turned on for the first time, a welcome screen will be displayed. Select your language and press OK. Follow the on-screen instructions to setup your TV and install channels. The installation wizard will guide you through the setup process. You can perform initial setup anytime using the Factory reset option in the Settings>Device Preferences>About menu. You can access the Settings menu from the Home screen or from the TV options menu in Live TV mode.
1. Welcome Message and Language Selection
“Welcome” message will be displayed along with the language selection options listed on the screen. Select the desired language from the list and press OK to continue.
2. Region/Country
In the next step select your region or country from the list and press OK to continue.
3. Initial Setup
After the region/country selection you can start the initial setup wizard. Highlight Continue and press OK to proceed. You will not be able go back and change the language and region/country once you proceed. If you need to change your language or region/country selection after this step, you will have to switch the TV into standby mode so the setup process starts from the beginning when you next switch on the TV. In order to do this, press and hold the Standby button. A dialogue will be displayed. Highlight OK and press OK.
4. Search for accessories
A search for accessories will be performed after the initial setup has started. Follow the on-screen instructions to pair your remote control (depends on the model of the remote control) and other wireless accessories with your TV. Press Back/Return button to end adding accessories and proceed.
5. Quick Setup
If you didn’t priorly connect your TV to the Internet via Ethernet a screen will be displayed where you can transfer your Android phone’s WLAN network and Google Account to your TV. Highlight Continue and press OK to proceed. Follow the on-screen instructions on your TV and your phone to complete the process. You can also skip this step by selecting Skip option. Some steps may be skipped depending on the settings made in this step.
If you did priorly connect your TV to the Internet via Ethernet a message will be displayed stating that you are connected. You can choose to continue with wired connection or change the network. Highlight Change

network and press OK if you want to use wireless connection instead of wired connection.
6. Network Connection
You will be directed to the next step automatically, if you connect your TV to the Internet via Ethernet at this point. If not, available wireless networks will be searched and listed on the next screen. Select your WLAN network from the list and press OK to connect. Enter the password using the virtual keyboard if the network is password protected. Select the Other network option from the list, if the network that you want to connect has hidden SSID.
If you prefer not to connect to the Internet at this point you can skip this step by selecting Skip option. You can connect to the Internet later using the Network & Internet menu options in the Settings menu from the Home Screen or from the TV options menu in Live TV mode.
This step will be skipped if internet connection has been established in the previous step.
7. Network Privacy Policy
Network Privacy Policy screen will be displayed next. Read the related explanations displayed on the screen. You can use Up and Down directional buttons to scroll through and read the entire text. Highlight Accept and press OK on the remote to confirm and proceed. You can change this setting later using Network Privacy Policy option in the Settings>Network & Internet menu.
This step will be skipped if no internet connection has been established in the previous step.
8. Sign in to your Google account
If connection succeeds, you can sign in to your Google account on the next screen. You need to be signed in to a Google account in order to use Google services. This step will be skipped if no internet connection has been established in the previous step or if you already signed in to your Google account in Quick Setup step.
By signing in, you will be able to discover new apps for videos, music and games on Google Play; get personalised recommendations from apps like YouTube; buy or rent the newest movies and shows on Google Play Movies & TV; access your entertainment and control your media. Highlight Sign In and press OK to proceed. You can sign in to your Google account by entering your e-mail address or phone number and your password, or create a new account.
If you prefer not to sign in to your Google account at this point you can skip this step by selecting Skip option.
9. Terms of Service
Terms of Service screen will be displayed next. By continuing, you will agree to the Google Terms of Service, the Google Privacy Policy and the Google Play Terms of Service. Highlight Accept and press

English – 9 –

OK on the remote to confirm and proceed. You can also view Terms of Service, Privacy Policy and Play Terms of Service on this screen. To display the content an internet connection is needed. A message will be displayed mentioning the web site address on which this information can also be viewed, in case internet access is not available.
10. Google Services
Select each to learn more about each service, such as how to turn it on or off later. Data will be used according to Google’s Privacy Policy. Highlight Accept and press OK to confirm your selection of these Google services settings.
Use location
You can allow or disallow Google and third party apps to use your TV’s location information. Highlight Use location and press OK to view detailed information and turn this feature on or off. You can change this setting later using Location status option in the Settings>Device Preferences>Location menu.
Help improve Android

environment. This option is intended only for store use. It is recommended to select Home for home use.
13. Chromecast built-in always available
Select your chromecast availability preference. If set as On your TV will be detected as a Google Cast device and allow Google Assistant and other services to wake your TV up to respond to Cast commands, even when on standby mode and the screen is off.
14. Tuner Mode
The next step is the selection of the tuner mode. Select your tuner preference to install channels for Live TV function. Antenna, Cable and Satellite options are available. Highlight the option that corresponds to your environment and press OK or Right directional button to proceed. If you don’t want to perform a tuner scan highlight Skip and press OK.
When the channel scan with the selected tuner is completed, the installation wizard will bring you back to this step. In case you want to continue scanning channels with another tuner, you can proceed as explained below.

Automatically send diagnostic information to Google, like crash reports and usage data from your device and apps. This information won’t be used to identify you. Highlight Help improve Android and press OK to view detailed information and turn this feature on or off. You can change this setting later using the Settings>Device Preferences>Usage & Diagnostics menu.
Services and your privacy

Antenna
If Antenna option is selected, you can choose to search for digital terrestrial and analogue broadcasts. On the next screen highlight the option you prefer and press OK to start the search or select Skip Scan to continue without performing a search.
Note: If the country selected does not have analogue broadcasts, analogue channels may not be searched.

Google Assistant sends services you talk to a unique code. That way, services can remember things like your preferences during conversations. You can view, manage and reset the data sent to services on each service’s page in the Explore section of the Assistant mobile app. Learn more at g.co/assistant/idreset.
Information on Google services and some features of your TV will be displayed next. If you have signed in to your Google account in the previous steps, you can also turn on personal results for Assistant by choosing the related option when prompted. Press OK consecutively to proceed.
11. Password
Depending on the country selection you made in the earlier steps, you may be asked to define a 4-digit password (PIN) at this point. Press OK to proceed. The selected PIN cannot be `0000′. This PIN will be required in order to access some menus, content or to release locked channels, sources, etc. You will have to enter it if you are asked to enter a PIN for any menu operation later.
12. Select TV Mode
In the following step of the initial setup, you can set the TV’s operation mode either as Home or as Store. Store option will configure your TV’s settings for store

Cable
If Cable option is selected, you can choose to search for digital cable and analogue broadcasts. If any, available operator options will be listed on the Select Operator screen. Otherwise this step will be skipped. You can select only one operator from the list. Highlight the desired operator and press OK or the Right directional button to proceed. On the next screen highlight the option you prefer and press OK to start the search or select Skip Scan to continue without performing a search. If one of the digital channel search options is selected a configuration screen will be displayed next. Scan Mode, Frequency (KHz), Modulation, Symbol Rate (Ksym/s), Network ID options may need to be set. To perform a full scan set the Scan Mode as Full or Advanced if available. Depending on the selected operator and/or Scan Mode some options may not be available to be set.
Note: If the country selected does not have analogue broadcasts, analogue channels may not be searched.
Once you are done with setting available options, press the Right directional button to proceed. The TV will start to search available broadcasts.
Satellite

English – 10 –

If Satellite option is selected, Antenna Type screen will be displayed next. If you have a Direct satellite system, you can proceed to the next step quickly by selecting the Next option here. Highlight More and press OK to set the antenna type manually. Single, Tone Burst, DiSEqC and Unicable options are available. Highlight the antenna type that corresponds to your satellite system and press OK or the Right directional button to proceed to the next step.
Next screen will be Select Operator screen. You can select only one operator from the list. Highlight the desired operator and press OK or the Right directional button to proceed. Some of the options in the following steps may be preset and/or additional steps may be added or some steps may be skipped depending on the selected operator in this step. Check the parameters in each step before proceeding and adjust if necessary. You can highlight General and press OK or Right directional button to proceed with normal satellite installation.
LNB List screen will be displayed next. You may be able to set up different satellites depending on the selected country, antenna type and operator in the previous steps. Highlight the desired satellite option and press OK or the Right directional button to set the parameters. The Satellite Status of the first satellite option will be set as On. In order to enable channel scan on the satellite, this option should be set as On first.
Following satellite parameters will be available. You may not be able to change all settings depending on the previous selections.

LNB Configurations: Set the parameters for LNB. For DiSEqC antenna type select the correct DiSEqC port corresponding to your satellite system. Set other parameters in accordance with your satellite system if necessary.
Signal Quality: The signal quality status is displayed as a percentage.
Signal Level: The signal level status is displayed as a percentage.
Press the Back/Return button and select next satellite you want to set. After you completed the configuration changes, highlight Next on the LNB List screen and press OK or Right directional button to proceed.
If Load Preset List option is selected in the previous step next steps will be skipped and the preset channel list installation will start. If the correct satellite has not been selected for SatcoDX installation, a warning dialogue will be displayed on the screen. The satellite/s that can be selected will be listed. Press OK to close the dialogue and then set the satellite accordingly.
Channel Scan screen will be displayed next. Select Skip Scan to proceed without performing a scan and complete the initial setup. Select Only digital channels and press OK or the Right directional button to start the search. While the search continues you can press the Back/Return button, highlight Skip Scan and press OK or Right directional button to stop the search. The channels that have already been found will be stored in the channel list.
When the initial setup is completed a message will be displayed. Press OK to finish the setup.

Satellite Status: Set the status option to On to enable channel search on the selected satellite. Highlight this option and press OK to change the status.
Satellite Selection: Select the satellite on which you want to perform a channel search.
Scan Mode: Set your scan mode preference. Full and Network options will be available. If you are going to perform a network scan, make sure that you have adjusted the Frequency, Symbol Rate (Ksym/s) and Polarisation parameters under the Transponder option accurately.
Scan Type: You can perform a scan for free or encrypted channels only. If the Free option is selected encrypted channels will not be installed. Select All to scan all channels.
Store Type: You can select to store TV channels (referred to as `Digital Channels’ in the menu) or radio channels only. Select All to store all channels.
Transponder: Adjust the Frequency, Symbol Rate (Ksym/s) and Polarisation parameters for the selected satellite if necessary.

You will be asked to give your consent to the collection of your data. Read the text on the screen for detailed information. Highlight Accept and press OK to give your consent and proceed. To skip without giving your consent, select Skip. You can change this setting later using the Settings>Device Preferences>Manufacturer Usage & Diagnostics menu.
Home Screen will be displayed. You can press the Exit button on the remote to switch to Live TV mode and watch TV channels.
Home Screen
To enjoy the benefits of your Android TV, your TV must be connected to the Internet. Connect the TV to a home network with a high-speed Internet connection. You can connect your TV wirelessly or wired to your modem/router. Refer to the Network & Internet and Connecting to the Internet sections for further information on how to connect your TV to the Internet.
The Home menu is the centre of your TV. From the Home menu, you can start any application, switch to a TV channel, watch a movie, or switch to a connected device. Press the Home button to display Home

English – 11 –

Screen. You can also select the Android TV Home option from the Inputs menu to switch to Home Screen. To open the Inputs menu, press the Source button on the remote or press the Menu button on the remote when the TV is in Live TV mode, highlight the Source option in the TV options menu, and press OK. Depending on your TV setup and your country selection in the initial setup, the Home menu may contain different items.
The available options of the Home Screen are positioned in rows. To navigate through the Home Screen options use the directional buttons on the remote. Apps, YouTube, Google Play Movies & TV, Google Play Music and Google Play related rows and rows of the applications you have installed might be available. Select a row then move the focus to the desired item in the row. Press OK button to make a selection or to enter a sub-menu.
On the upper left of the screen, search tools will be located. You can choose either to type a word to start a search via the virtual keyboard or try voice search option if your remote has a built-in microphone. Move the focus to the desired option and press OK to proceed.
On the upper right of the screen, Notifications, Inputs, Network & Internet (will be named as Connected or Not Connected according to the current connection status), Settings and the current time will be displayed. You can configure your date and time preferences using the Date & Time menu options from the Settings>Device Preferences menu.
First row will be the Apps row. Live TV and Multi Media Player apps will be available alongside with other favourite apps. If not, highlight Add app to favourites option (plus sign) on the Apps row and press OK. Then select the app you want to add and press OK. Repeat this procedure for each app. Highlight Live TV and press OK or press the Exit button on the remote to switch to Live TV mode. If the source was set to an option other than Antenna, Cable, Satellite or ATV previously, press the Source button and set one of these options to watch live TV channels. Highlight Multi Media Player and press OK to browse the connected USB devices and play/display the installed media content on the TV. The audio can be played through the speakers of the TV or through the speaker systems connected to the TV. To browse the Internet, you will need an internet browser application. Make a search or launch the Google Play Store app, find a browser and download it.
For some countries, the Home Screen will be organised into several tabs. Home, Discover and Apps tabs will be available. You can scroll through the tabs using the directional buttons. Each tab will have a featured content row at the top. In the Home tab, there will be rows for favourite apps, recent Live TV programmes

and recommendations from streaming apps. In the Discover tab recommendations from streaming services will be displayed. In the Apps tab, all the apps installed on your TV will be displayed and you can install more from Play Store using the related option. Depending on your TV setup and your country selection in the initial setup, the tabs on the Home Screen may contain different items.
Live TV Mode Menu Content
Switch the TV to Live TV mode first and then press the Menu button on the remote to see Live TV menu options. To switch to Live TV mode you can either press the Exit button or highlight the Live TV app from the Apps row on the Home Screen and press OK. For some countries, the Live TV app will be situated in the Home tab on the Home Screen and the row with this app will be named as Favourite Apps.
Channels
Programme Guide: Open the electronic programme guide. Refer to the Programme Guide section for detailed information.
Channel Export/Import: Export this TV’s satellite channel list data to a connected USB storage device, or import a previously exported data from a connected USB storage device to this TV. The Channel Export and Channel Import options will be available. Connect a USB storage device () to the TV, highlight the option you want to continue with and press OK. The Channel Export/Import option will not be available if the input source is not set to Satellite.
(
) The USB storage device must be formatted with the FAT32 file system.
Channel: Open the Channel menu. You can use the Channels menu options to search for broadcast channels. Refer to the Channel section for more information.
TV Options
Source: Display the list of input sources. Select the desired one and press OK to switch to that source.
Picture: Open the Picture menu. Refer to Device Preferences section for detailed information.
Sound: Open the Sound menu. Refer to Device Preferences section for detailed information.
Power
Sleep Timer: Define a time after which you want your TV to enter sleep mode automatically. Set as Off to disable.
Picture off: Select this option and press OK to turn the screen off. Press a button on the remote or on the TV to turn the screen on again. Note that you can not turn the screen on via the Volume +/-,

English – 12 –

Mute and Standby buttons. These buttons will function normally.

Cookie Settings: Set your cookie setting preference for HBBTV services.

No Signal Auto Power Off: Set the behaviour of the TV, when no signal is detected from the currently set input source. Define a time after which you want your TV to turn itself off or set as Off to disable.
Auto Sleep: Define an idle time after which you want your TV to enter sleep mode automatically. 4 Hours, 6 Hours and 8 Hours options are available. Set as Never to disable.
CI Card: Display available menu options of the CI card in use. This item may not be available depending on the input source setting.
Advanced Options
The options of this menu may change and/or appear as greyed out depending on the selected input source.
Audio Channel: Set your Audio Channel preference.
Audio Language: Set your language preference for audio. This item may not be available depending on the input source setting.
2nd Audio Language: Set one of the listed language options as second audio language preference.
Sound Tracks: Set your sound track preference, if any available.
Blue Mute: Turn this function on/off according to your preference. When turned on, blue background will be displayed on the screen when no signal is available.
Default Channel: Set your default startup channel preference. When the Select Mode is set as User Select, Show Channels option will become available. Highlight and press OK to see channel list. Highlight a channel and press OK to make a selection. Selected channel will be displayed, every time the TV is turned back on from any standby mode. If the Select Mode is set as Last Status, the last watched channel will be displayed.
Interaction Channel: Turn the Interaction Channel function on or off. This feature is useful in the UK and Ireland only.
MHEG PIN Protection: Turn the MHEG PIN protection function on or off. This setting enables or disables access some of the MHEG applications. Disabled applications can be released by entering the right PIN. This feature is useful in the UK and Ireland only.
HBBTV Settings
HBBTV Support: Turn the HBBTV function on or off.
Do Not Track: Set your preference regarding the tracking behaviour for HBBTV services.

Persistent Storage: Turn the Persistent Storage function on or off. If set as On cookies will be stored with an expiry date in the persistent memory of the TV.
Block Tracking Sites: Turn the Block Tracking Sites function on or off.
Device ID: Turn the Device ID function on or off.
Reset Device ID: Reset the device ID for HBBTV services. Confi rmati on dialogue will be displayed. Press OK to proceed, Back to cancel.
Subtitle
Analogue Subtitle: Set this option as Off, On or Mute. If Mute option is selected, the analogue subtitle will be displayed on the screen but the speakers will be muted simultaneously.
Digital Subtitle: Set this option as Off or On.
Subtitle Tracks: Set your subtitle track preference, if any available.
Digital Subtitle Language: Set one of the listed language options as first digital subtitle language preference.
2nd Digital Subtitle Language: Set one of the listed language options as second digital subtitle language preference. If the selected language in the Digital Subtitle Language option is not available, the subtitles will be displayed in this language.
Subtitle Type: Set this option as Normal or Hearing Impaired. If Hearing Impaired option is selected, it provides subtitle services to deaf and hard of hearing viewers with additional descriptions.
Teletext
Digital Teletext Language: Set the teletext language for digital broadcasts.
Decoding Page Language: Set the decoding page language for teletext display.
BISS Key: “Click To Add Biss Key” message will be displayed. Press OK button to add a biss key. Frequency, Symbol Rate (KSym/s), Polarisation, Programme ID and CW Key parameters will be available to be set. Once you are done with the settings highlight Save Key and press OK to save and add the biss key. This option will not be available if the input source is not set as Satellite. Available options will differ depending on the selected country during the initial setup process.
System Information: Display detailed system information on the current channel such as Signal Level, Signal Quality, Frequency, etc.

English – 13 –

Record
Record List: The recordings will be displayed if any available. Highlight a recording of your choice and press the Yellow button to delete it or press the Blue button to view detailed information. You can use Red and Green buttons to scroll the page up and down.
Device Info: Connected USB storage devices will be displayed. Highlight the device of your choice and press OK to see available options.
Set TimeShift: Tag the selected USB storage device or a partition on it for time shift recording.
Set PVR: Tag the selected USB storage device or a partition on it for PVR.
Format: Format the selected USB storage device. Refer to USB Recording section for more information
Speed Test: Start a speed test for the selected USB storage device. The test result will be displayed when completed.
Schedule List: Add reminders or record timers using the Schedule List menu.
Time Shift Mode: Enable or disable timeshift recording feature. Refer to USB Recording section for more information.
Settings
You can access the Settings menu from the Home Screen or from the TV options menu in Live TV mode.
Network & Internet
You can configure your TV’s network settings using the options of this menu. You can also highlight the Connected/Not Connected icon on the Home screen and press OK to access this menu.
Network Privacy Policy: Display network privacy policy. You can use Up and Down directional buttons to scroll through and read the entire text. Highlight Accept and press OK to give your consent.
Wi-Fi: Turn the wireless LAN (WLAN) function on and off.
Available networks
When the WLAN function is turned on, available wireless networks will be listed. Highlight See all and press OK to see all networks. Select one and press OK to connect. You may be asked to enter a password to connect to the selected network, in case the network is password protected. Additionally you can add new networks by using the related options.
Other options
Add new network: Add networks with hidden SSID’s.

Scanning always available: You can let the location service and other apps scan for networks, even when WLAN function is turned off. Press OK to turn it on and off. Wow: Turn this function on and off. This function allows you to turn on or awaken your TV via wireless network.
Wol: Turn this function on and off. This function allows you to turn on or awaken your TV via network.
Ethernet
Connected/Not connected: Displays the status of the internet connection via Ethernet, IP and MAC addresses.
Proxy settings: Set a HTTP proxy for browser manually. This proxy may not be used by other apps.
IP settings: Configure your TV’s IP settings.
Channel
The content of this menu may change depending on the selected input source and whether the channel installation is completed.
Channels
Options of this menu may change or become inactive depending on the input source and on the Channel Installation Mode selection.
Input Source – Antenna
Channel Scan: Start a scan for digital terrestrial channels. You can press the Back/Return button to cancel the scan. The channels that have already been found will be stored in the channel list.
Update Scan: Search for updates. Previously added channels will not be deleted, but any newly found channels will be stored in the channel list.
Single RF Scan: Select the RF Channel by using the Right/Left directional buttons. Signal Level and Signal Quality of the selected channel will be shown. Press OK to start scan on the selected RF channel. The found channels will be stored in the channel list.
Manual Service Update: Start a service update manually.
LCN: Set your preference for LCN. LCN is the Logical Channel Number system that organises available broadcasts in accordance with a recognisable channel number sequence (if available).
Channel Scan Type: Set your scan type preference.
Channel Store Type: Set your store type preference.
Favourite Network Select: Select your favourite network. This menu option will be active, if more than one network is available.
Channel Skip: Set channels to be skipped when switching the channels via Programme +/- buttons

English – 14 –

on the remote. Highlight the desired channel/s on the list and press OK to select/unselect.
Channel Swap: Replace the positions of the two selected channels in the channel list. Highlight the desired channels on the list and press OK to select. When the second channel is selected, the position of this channel will be replaced with the position of the first selected channel. You can press the Yellow button and enter the number of the channel you want to select. Then highlight OK and press OK to go to that channel. You may need to set the LCN option to Off in order to enable this feature.
Channel Move: Move a channel to the position of another channel. Highlight the channel you want to move and press OK to select. Then do the same for a second channel. When the second channel is selected, you can press the Blue button and the first selected channel will be moved to the position of that channel. You can press the Yellow button and enter the number of the channel you want to select. Then highlight OK and press OK to go to that channel. You may need to set the LCN option to Off in order to enable this feature.
Channel Edit: Edit channels in the channel list. Edit the name of the selected channel and display Network Name, Channel Type and Frequency information related to that channel if available. Depending on the channel other options may also be editable. Press OK or the Yellow button to edit the highlighted channel. You can press the Blue button to delete the highlighted channel.
Channel Delete: Highlight the desired channel/s on the list and press OK or the Yellow button to select/ unselect. Then press the Blue button to delete the selected channel/s.
Clear Channel List: Delete all channels stored in the channel list. A dialogue will be displayed for confirmation. Highlight OK and press OK button to proceed. Highlight Cancel and press OK to cancel.
Input Source – Cable
Channel Scan: Start a scan for digital cable channels. If available, operator options will be listed. Select the desired one and press OK. Scan Mode, Frequency and Network ID options may be available. The options may vary depending on the operator and the Scan Mode selections. Set the Scan Mode as Full if you don’t know how to set up other options. Highlight Scan and press OK or the Right directional button to start the scan. You can press the Back/Return button to cancel the scan. The channels that have already been found will be stored in the channel list.
Single RF Scan: Enter the Frequency value. Signal Level and Signal Quality of the selected Frequency will be shown. Highlight the Scan option and press OK or the Right directional button to start scan. The found channels will be stored in the channel list.

LCN: Set your preference for LCN. LCN is the Logical Channel Number system that organises available broadcasts in accordance with a recognisable channel number sequence (if available).
Channel Scan Type: Set your scan type preference.
Channel Store Type: Set your store type preference.
Favourite Network Select: Select your favourite network. This menu option will be active, if more than one network is available. This option may not be available depending on the selected country during the initial setup process.
Channel Skip: Set channels to be skipped when switching the channels via Programme +/- buttons on the remote. Highlight the desired channel/s on the list and press OK to select/unselect.
Channel Swap: Replace the positions of the two selected channels in the channel list. Highlight the desired channels on the list and press OK to select. When the second channel is selected, the position of this channel will be replaced with the position of the first selected channel. You can press the Yellow button and enter the number of the channel you want to select. Then highlight OK and press OK to go to that channel. You may need to set the LCN option to Off in order to enable this feature.
Channel Move: Move a channel to the position of another channel. Highlight the channel you want to move and press OK to select. Then do the same for a second channel. When the second channel is selected, you can press the Blue button and the first selected channel will be moved to the position of that channel. You can press the Yellow button and enter the number of the channel you want to select. Then highlight OK and press OK to go to that channel. You may need to set the LCN option to Off in order to enable this feature.
Channel Edit: Edit channels in the channel list. Edit the name of the selected channel and display Network Name, Channel Type, Frequency, Modulation and Symbol Rate information related to that channel. Depending on the channel other options may also be editable. Press OK or the Yellow button to edit the highlighted channel. You can press the Blue button to delete the highlighted channel.
Channel Delete: Highlight the desired channel/s on the list and press OK or the Yellow button to select/ unselect. Then press the Blue button to delete the selected channel/s.
Clear Channel List: Delete all channels stored in the channel list. A dialogue will be displayed for confirmation. Highlight OK and press OK button to proceed. Highlight Cancel and press OK to cancel.
Input Source – Satellite
Satellite Re-scan: Start a satellite scan beginning with the antenna selection screen. When this scanning

English – 15 –

option is preferred, some scanning configurations will not be available and thus the preferences you made during the initial setup process may not be changed.
For the General Satellite channel installation mode SatcoDX Scan option may also be available here. Copy the relevant sdx file into the root directory of an USB storage device and connect it to your TV. Highlight this option and press OK. Download SatcoDX option will be highlighted, press OK to continue. Select the sdx file from the connected USB storage device on the next screen and press OK. Satellite selection screen will be displayed. The status of the first satellite option will appear as On. Highlight that satellite option and press OK. Set the parameters corresponding to your system and correct satellite and press the Back/Return button to return to the satellite selection screen. Highlight Next and press OK to proceed with the SatcoDX channel list installation. If the selected satellite is not correct for SatcoDX installation, a warning dialogue will be displayed on the screen. The satellite/s that can be selected will be listed. Press OK to close the dialogue and press Back/Return to return to satellite selection screen. Then set the satellite accordingly.
Satellite Add: Add satellite and perform a satellite scan. This menu option will be active, if Channel Installation Mode is set to General Satellite.
Satellite Update: Search for any updates by repeating the previous scan with the same settings. You will also be able to configure these settings before the scan. If Channel Installation Mode is set to Preferred Satellite this option may be named differently depending on the available services. Highlight the satellite and press OK button to configure detailed satellite parameters. Then press the Back/Return button to return to the satellite selection screen. Highlight Next and press OK to proceed.
Satellite Manual Tuning: Start a manual satellite scan. Highlight the satellite and press OK button to configure detailed satellite parameters. Then highlight Next and press OK to proceed.
Favourite Network Select: Select your favourite network. This menu option will be active, if more than one network is available. This option may not be available depending on the selected country during the initial setup process.
Channel Skip: Set channels to be skipped when switching the channels via Programme +/- buttons on the remote. Highlight the desired channel/s on the list and press OK to select/unselect.
Channel Swap: Replace the positions of the two selected channels in the channel list. Highlight the desired channels on the list and press OK to select. When the second channel is selected, the position of this channel will be replaced with the position of the first selected channel. You can press the Yellow button

and enter the number of the channel you want to select. Then highlight OK and press OK to go to that channel.
Channel Move: Move a channel to the position of another channel. Highlight the channel you want to move and press OK to select. Then do the same for a second channel. When the second channel is selected, you can press the Blue button and the first selected channel will be moved to the position of that channel. You can press the Yellow button and enter the number of the channel you want to select. Then highlight OK and press OK to go to that channel.
Channel Edit: Edit channels in the channel list. Edit the name and channel number of the selected channel and display Network Name, Channel Type and Frequency information related to that channel if available. Depending on the channel other options may also be editable. Press OK or the Yellow button to edit the highlighted channel. You can press the Blue button to delete the highlighted channel.
Channel Delete: Highlight the desired channel/s on the list and press OK or the Yellow button to select/ unselect. Then press the Blue button to delete the selected channel/s.
Clear Channel List: Delete all channels stored in the channel list. A dialogue will be displayed for confirmation. Highlight OK and press OK button to proceed. Highlight Cancel and press OK to cancel.
Note: Some options may not be available and appear as greyed out depending on the operator selection and operator related settings.
Channel Installation Mode
Set this option as Preferred Satellite or General Satellite. The channel list will also change depending on the selected option here. In order to watch the channels on the satellite you want, this option should be selected accordingly. Set to Preferred Satellite to watch operator channels, if you have performed an operator installation. Set to General Satellite to watch other satellite channels, if you have performed a normal installation.
Auto Channel Update
Turn the auto channel update function on or off.
Channel Update Message
Turn the channel update message function on or off.
Parental Controls
(*) To enter this menu PIN should be entered first. Use the PIN that you have defined during the initial setup process. If you have changed the PIN after the initial setup use that PIN. If you didn’t set a PIN during the initial setup, you can use the default PIN. The default PIN is 1234. Some options may not be available or vary depending on the country selection during the initial setup. The content of this menu may not be displayed if the channel installation is not completed and no channels are installed.

English – 16 –

Channels Blocked: Select channel/s to be blocked from the channel list. Highlight a channel and press OK to select/unselect. To watch a blocked channel PIN should be entered first.
Programme Restrictions: Block programmes according to the age rating information that is being broadcasted with them. You can turn on or off restrictions, set rating systems, age limits, and block unrated programmes using the options of this menu.
Inputs Blocked: Prevent access to the selected input source content. Highlight the desired input option and press OK to select/unselect. To switch to a blocked input source PIN should be entered first.
Change PIN: Change the PIN you defined during the initial setup. Highlight this option and press OK. You will need to enter the current PIN first. Then new PIN entry screen will be displayed. Enter the new PIN twice for confirmation.
Open Source Licences
Display Open Source Software licence information.
Accounts & Sign In
Highlight this option and press OK to sign into your Google account. Following options will be available if you have signed into your Google account.
Google: You can configure your data syncing preferences or remove your registered account on the TV. Highlight a service listed in the Choose synced apps section and press OK to enable/disable data sync. Highlight Sync now and press OK to sync all enabled services at once.
Add account: Add a new one to available accounts by signing in to it.
Apps
Using the options of this menu, you can manage the apps on your TV.
Recently opened apps
You can display recently opened apps. Highlight See all apps and press OK to see all the apps installed on your TV. The amount of storage space that they needed will also be displayed. You can see the version of the app, open or force to stop the running of the app, uninstall a downloaded app, see the permissions and turn them on/off, turn on/off the notifications, clear the data and cache, etc. Highlight an app and press OK to see available options.
Changing the storage location of an app
If you did priorly format your USB storage device as device storage to extend the storage capacity of your TV, you can move the app to that device. For more information refer to the Storage section in the Settings>Device Preferences menu.

Highlight the app you want to move and press OK to see available options. Then highlight the Storage used option and press OK. If the selected app is convenient you will see your USB storage device as an option for this app to be stored. Highlight that option and press OK to move the app.
Note that the apps that moved to a connected USB storage device will not be available if that device is disconnected. And if you format the device with the TV as removable storage, don’t forget to back up the apps using the related option. Otherwise, the apps stored on that device will not be available after formatting. For more information refer to the Storage section in the Settings>Device Preferences menu.
Permissions
Manage the permissions and some other features of the apps.
App permissions: The apps will be sorted by permission type categories. You can enable disable permissions for the apps from within these categories.
Special app access: Configure some app features and special permissions.
Security & restrictions: You can allow or restrict installation of apps from sources other than the Google Play Store.
Device Preferences
About: Check for system updates, change the device name, reset the TV to the factory defaults and display system information such as network addresses, serial numbers, versions, etc. You can also display legal information, manage advertisings, display your advertising ID, reset it and turn on/off the personalised advertisings based on your interests.
Factory reset: Reset all TV settings to the factory defaults. Highlight Factory reset and press OK. A confirmation message will be displayed, select Factory reset to proceed with resetting. A further confirmation message will be displayed, select Delete everything to factory reset the TV. The TV will switch off/on first and the initial setup will start. Select Cancel to exit.
Note: You may be asked to enter a PIN to proceed with the reset operation. Enter the PIN you have defined during the initial setup. If you didn’t set a PIN during the initial setup, you can use the default PIN. The default PIN is 1234.
Netflix ESN: Displays your ESN number. ESN number is an unique ID number for Netflix, created especially to identify your TV.
TV Life Time: Your TV’s lifetime information is displayed.
Date & Time: Set the date and time options of your TV. You can set your TV to automatically update the time and date data over the network or over the

English – 17 –

broadcasts. Set corresponding to your environment and preference. Disable by setting as Off if you want to manually change the date or time. Then set date, time, time zone and hour format options.
Timer
Power On Time Type: Set your TV to turn on by itself. Set this option as On or Once to enable a power on timer to be set, set as Off to disable. If set as Once the TV will turn on only once at the defined time in Auto Power On Time option below.
Auto Power On Time: Available if the Power On Time Type is enabled. Set the desired time for your TV to come on from standby using the directional buttons and press OK to save the new set time.
Power Off Time Type: Set your TV to turn off by itself. Set this option as On or Once to enable a power off timer to be set, set as Off to disable. If set as Once the TV will turn off only once at the defined time in Auto Power Off Time option below.
Auto Power Off Time: Available if the Power Off Time Type is enabled. Set the desired time for your TV to go to standby using the directional buttons and press OK to save the new set time.
Language: Set your language preference.
Keyboard: Select your keyboard type and manage keyboard settings.
Inputs: Show or hide an input terminal, change the label for an input terminal, and configure the options for HDMI CEC (Consumer Electronic Control) function and display the CEC device list.
Power
Sleep Timer: Define a time after which you want your TV to enter sleep mode automatically. Set as Off to disable.
Picture Off: Select this option and press OK to turn the screen off. Press a button on the remote to turn the screen on again. Note that you can not turn the screen on via the Volume +/-, Mute and Standby buttons. These buttons will function normally.
No Signal Auto Power Off: Set the behaviour of the TV, when no signal is detected from the currently set input source. Define a time after which you want your TV to turn itself off or set as Off to disable.
Auto Sleep: Define an idle time after which you want your TV to enter sleep mode automatically. 4 Hours, 6 Hours and 8 Hours options are available. Set as Never to disable.
Picture
Picture Mode: Set the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Standard, Vivid, Sport, Movie and Game.

Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Bright, Dolby Vision Dark and Dolby Vision Vivid picture mode options will be available instead of other picture modes.
Backlight, Brightness, Contrast, Colour, HUE, Sharpness settings will be adjusted according to the selected picture mode.
Dolby Vision Notification: Set your notification appearance preference for Dolby Vision content. When turned on, Dolby Vision logo will be displayed on the screen when Dolby Vision content is detected.
Auto Backlight: Set your auto backlight preference. Off, Low, Middle and Eco options will be available. Set as Off to disable.
Backlight: Adjust the backlight level of the screen manually. This item will not be available if the Auto Backlight is not set as Off.
Brightness: Adjust the brightness value of the screen.
Contrast: Adjust the contrast value of the screen.
Colour: Adjust the colour saturation value of the screen.
HUE: Adjust the hue value of the screen.
Sharpness: Adjust the sharpness value for the objects displayed on the screen.
Gamma: Set your gamma preference. Dark, Middle and Bright options will be available.
Colour Temperature: Set your colour temperature preference. User, Cool, Standard and Warm options will be available. You can adjust red, green and blue gain values manually. If one of these values is changed manually, Colour Temperature option will be changed to User, if not already set as User.
Display Mode: Set the aspect ratio of the screen. Select one of the predefined options according to your preference.
HDR: Turn the HDR function on or off. This item will be available if HDR content is detected.
Advanced Video
DNR: Dynamic Noise Reduction (DNR) is the process of removing noise from digital or analogue signals. Set your DNR preference as Low, Medium, Strong, Auto or turn it off by setting as Off.
MPEG NR: MPEG Noise Reduction cleans up block noise around outlines and noise on the background. Set your MPEG NR preference as Low, Medium, Strong or turn it off by setting as Off.
Max Vivid: Manipulates contrast and colour perception, basically converts Standard Dynamic Range picture to High Dynamic Range picture. Set as On to enable.
Adaptive Luma Control: Adaptive Luma control adjusts contrast settings globally according to

English – 18 –

content histogram in order to provide deeper black and brighter white perception. Set your Adaptive Luma Control preference as Low, Medium, Strong or turn it off by setting as Off.
Local Contrast Control: Local contrast control divides each frame to defined small regions and provides ability to apply independent contrast setting for each region. This algorithm improves fine details and provides better contrast perception. It makes higher depth impression by enhancing dark and bright areas without any detail loss. Set your Local Contrast Control preference as Low, Medium, High or turn it off by setting as Off.
Flesh Tone: Adjusts the skin tone brightness. Set your preference as Low, Medium, or High to enable. Set as Off to disable.
DI Film Mode: It is the function for 3:2 or 2:2 cadence detection for 24 fps film content and improves the side effects (like interlacing effect or judder) which are caused by these pull down methods. Set your DI Film Mode preference as Auto or turn it off by setting as Off. This item will not be available if Game Mode or PC Mode is turned on.
Blue Stretch: Human eye perceives cooler whites as brighter white, Blue Stretch feature changes White balance of mid-high grey levels to cooler colour temperature. Turn the Blue Stretch function on or off.
Game Mode: Game mode is the mode which cuts down some of the picture processing algorithms to keep up with video games that have fast frame rates. Turn the Game Mode function on or off. Note: The game mode can not be used for Netflix and YouTube. If you want to use the game mode for Multi Media Player or HDMI source, you need to set the MJC option to Off.
ALLM: ALLM (Auto Low Latency Mode) function allows the TV to activate or deactivate low latency settings depending on playback content. Highlight this option and press OK to turn the ALLM function on or off.
PC Mode: PC Mode is the mode which cuts down some of the picture processing algorithms to keep signal type as it is. It can be usable especially for RGB inputs. Turn the PC Mode function on or off.
De-Contour: Decreases the contour effects in low-resolution content and auto streaming services. Set your preference as Low, Middle, or High to enable. Set as Off to disable.
MJC: Optimises the TV’s video settings for motional images to acquire a better quality and readability. Highlight this option and press OK to see available options. Effect, Demo Partition, and Demo options will be available. Set the

Effect option to Low, Middle, or High to enable the MJC function. When enabled, Demo Partition and Demo options will become available. Highlight Demo Partition and press OK to set your preference. All, Right and Left options will be available. Highlight Demo and press OK to activate the demo mode. While the demo mode is active, the screen will be divided into two sections, one displaying the MJC activity, the other displaying the normal settings for the TV screen. If the Demo Partition option is set to All, both sides will display the MJC activity.
HDMI RGB Range: This setting should be adjusted according to input RGB signal range on HDMI source. It can be limited range (16-235) or full range (0-255). Set your HDMI RGB range preference. Auto, Full and Limit options will be available. This item will not be available, if the input source is not set as HDMI.
Low Blue Light: Electronic device screens emit blue light that can cause eye strain and may lead to eye problems over time. To reduce the effect of blue light set your preference as Low, Middle, or High. Set as Off to disable.
Colour Space: You can use this option to set the range of colours displayed on your TV screen. When set as On, colours are set according to the source signal. When set as Auto, the TV decides to set this function as on or off dynamically, according to source signal type. When set as Off, the TV’s maximum colour capacity is used by default.
Colour Tuner: Colour saturation, hue, brightness can be adjustable for red, green, blue, cyan, magenta, yellow and flesh tone (skin tone) for having more vivid or more natural image. Set the HUE, Colour, Brightness, Offset and Gain values manually. Highlight Enable and press OK to turn this function on.
11 Point White Balance Correction: White balance feature calibrates TV’s colour temperature in detailed grey levels. By visually or measurement, grey scale uniformity can be improved. Adjust the strength of the Red, Green, Blue colours and Gain value manually. Highlight Enable and press OK to turn this function on.
Reset to Default: Reset the video settings to factory default settings.
Note: Depending on the currently set input source some menu options may not be available.
Sound
System Sounds: System sound is the sound played when navigating or selecting an item on the TV screen. Highlight this option and press OK to turn this function on or off.

English – 19 –

Sound Style: For easy sound adjustment, you can select a preset setting. User, Standard, Vivid, Sports, Movie, Music and News options will be available. Sound settings will be adjusted according to the selected sound style. Some other sound options may become unavailable depending on the selection.
Balance: Adjust the left and right volume balance for speakers and headphones.
Sound Surround: Turn the surround sound feature on or off.
Equalizer Detail: Adjust the equalizer values according to your preferences.
Speakers Delay: Adjust the delay value for speakers.
eARC: Set your eARC preference. Off and Auto options will be available. Set as Off to disable.
Digital Output: Set the digital sound output preference. Auto, Bypass, PCM, Dolby Digital Plus and Dolby Digital options will be available. Highlight the option you prefer and press OK to set.
Digital Output Delay: Adjust the digital output delay value.
Auto Volume Control: With Auto Volume Control, you can set the TV to automatically level out sudden volume differences. Typically at the beginning of adverts or when you are switching channels. Turn this option on/off by pressing OK.
Downmix Mode: Set your preference to convert multi-channel audio signals to two-channel audio signals. Press OK to see the options and set. Stereo and Surround options will be available. Highlight the option you prefer and press OK to set.
DTS DRC: Dynamic Range Control provides gain adjustment of the source to maintain suitable audible range at both low and high playback levels. Turn this option on/off by pressing OK.
Dolby Audio Processing: With Dolby Audio Processing, you can improve the sound quality of your TV. Press OK to see the options and set. Some other sound options may become unavailable and appear as greyed out depending on the settings made here. Set the Dolby Audio Processing option to Off if you would like to change these settings.
Dolby Audio Processing: Highlight this option and press OK to turn this function on/off. Some options may not be available if this option is not turned on.

options may not be available if this option is not set to User.
Volume Leveler: Allows you to balance the sound levels. In this way, you are minimally affected by abnormal sound rises and falls. Turn this feature on/off by pressing OK.
Surround Virtualiser: Turn the surround virtualiser feature on or off.
Dolby Atmos: Your TV supports Dolby Atmos technology. By means of this technology the sound moves around you in three-dimensional space, so you feel like you’re inside the action. You will have the best experience if the input audio bitstream is Atmos. Turn this option on/off by pressing OK.
Dialogue Enhancer: This feature provides sound postprocessing options for speech-gated dialogue enhancement. Off, Low, Medium and High options will be available. Set according your preference. Note: This feature has an effect only if the input audio format is AC-4 or dolby audio processing is enabled. This effect only applies to the TV loudspeaker output.
Dolby Atmos Notification: Set your notification appearance preference for Dolby Atmos content. When turned on, Dolby Atmos logo will be displayed on the screen when Dolby Atmos content is detected.
DTS Virtual:X: This feature will enhance your sound experience by providing a virtualisation of surround speakers through your TV’s speakers. Highlight Virtual:X and press OK. TruBass option will become available. TruBass manages and enhances low frequency signals. Highlight this option and press OK to turn it on or off. Some other options may become unavailable and appear as greyed out depending on the setting made here. This item will not be available if Dolby Audio Processing is turned on.
Reset to Default: Resets the sound settings to factory defaults.
Storage: View the total storage space status of the TV and connected devices if available. To see detailed information on the usage details highlight and press OK. There will also be options for ejecting and setting up the connected USB storage devices as device storage.
Migrate data to this storage: This option will appear if you did priorly format your USB storage device as device storage. You can use this option to migrate some of the data stored on your TV to your USB storage device.

Sound Mode: If the Dolby Audio Processing option is turned on Sound Mode option will be available to set. Highlight the Sound Mode option and press OK to see the preset sound modes. Game, Movie, Music, News, Stadium, Smart and User options will be available. Highlight the option you prefer and press OK to set. Some

Note: If you move data to your USB storage device, you may need to plug in your storage device to use all your apps and other content.
Eject: To keep your content safe, eject your USB storage device before you unplug it from your TV.
Delete & format as device storage: You can use the connected USB storage device to extend the

English – 20 –

storage capacity of your TV. After doing this, that device will only be usable with the TV. Follow the on-screen instructions and read the information displayed on the screen before proceeding.
Note: Formatting the connected storage device will erase all data installed on it. Back up the files that you want to keep before you proceed with formatting the device.
Delete & format as removable storage: If you did priorly format your USB storage device as device storage, it will only be usable with your TV. You can use this option to format it again in order to use it with other devices. Before proceeding with the formatting, you may consider backing up the data on your device to your TV’s internal storage or to another USB storage device using the Back up apps option. Otherwise, some apps may not work properly after formatting. Follow the on-screen instructions and read the information displayed on the screen before proceeding.
Note: Formatting the connected storage device will erase all data installed on it. Back up the files that you want to keep before you proceed with formatting the device.
You can also go to the Notifications section on the Home Screen after connecting your USB device to your TV to see the available options. Highlight the notification related to your connected USB device and press OK.
Browse: Opens the Storage menu.

will become available. Set according to your preference. It is recommended not to activate store mode for home use.
Google Assistant: Highlight On and press OK to turn this feature on or off. Select your active account, view permissions, select which apps to include in search results, activate safe search filter and offensive word blocking, view open source licences.
Chromecast Built-in: Set your remote control notification preference. Highlight Let others control your cast media and press OK. Always, While Casting and Never options will be available. You can display open source licences and view version number and serial number under the About section.
Screen Saver: Set the screensaver options for your TV. You can choose a screensaver, set wait time for the screensaver or start the screensaver mode.
Energy Saver: Define a time after which you want your TV to turn itself off for energy saving. Set as Never to disable.
Location: You can allow the use of the wireless connection to estimate the location, see the recent location requests and allow or restrict the listed apps to use your location information.
Usage & Diagnostics: Automatically send usage data and diagnostic information to Google. Set according to your preference.

Setup as device storage: Has the same functionality as the Delete & format as device storage option described above.
Eject: Same as described above.
Home Screen: Customise your Home Screen. Select channels which will be displayed on the Home Screen, enable/disable video and audio previews. Organise apps and games, change their order or get more of them. Display open source licences.
For some countries, the Home Screen will be organised into several tabs and this menu will contain additional options to customise the content of these tabs. Highlight Set up and press OK to sign in to a Google account, so you can browse personalised recommendations for that account in the Discover tab on the Home Screen. After signing in, using the related options in this menu, you can view your account activity controls and permissions, customise services and define content preferences to get better recommendations.
Store Mode: Highlight Store mode and press OK. A dialogue will be displayed asking for your confirmation. Read the description, highlight Continue and press OK if you want to proceed. Then highlight On to activate or Off to deactivate and press OK. In store mode your TV’s settings will be configured for store environment and the supported features will be displayed on the screen. Once activated, Store Messaging setting

Manufacturer Usage & Diagnostics: If you accept, your TV will send diagnostic information (such as MAC address, country, language, software and firmware versions, bootloader versions and the source of the TV) and anonymous usage data from your device to a server located in Ireland. We are not able to identify you and are only collecting and storing this diagnostic information and anonymous usage data to ensure your device operates properly.
Accessibility: Configure Audio Type, Visually Impaired, Captions, Text to Speech settings and/or turn High Contrast Text on/off. Some of the caption settings may not be applied.
Audio Type: Set your audio type preference. Normal, Audio Description, Spoken Subtitle, Hearing Impaired, and Audio Description and Spoken Subtitle options are available.
Visually Impaired: Set the Audio Type as Audio Description to enable this option. Digital TV channels can broadcast special audio commentary describing on-screen action, body language, expressions and movements for people with visual disabilities.
Speaker: Turn this option on if you want to hear the audio commentary through the TV speakers.

English – 21 –

Headphone: Turn this option on if you want to route the sound of the audio commentary to the TV’s headphone output.
Volume: Adjust the volume level of the audio commentary.
Pan and Fade: Turn this option on if you want to hear the audio commentary more clearly, when it is available through broadcast.
Audio for the Visually Impaired: Set the audio type for visually impaired. Options will be available depending on the selected broadcast.
Fader Control: Adjust the volume balance between the main TV audio (Main) and audio commentary (AD).
Captions: Configure the settings for the captions. You can set the language, text size and style using the options of this menu. Highlight Display and press OK to turn on or off the sample caption demonstration.
Text to speech: With text-to-speech feature, your TV can convert written text into voice text to help visually impaired people listen to the information they are unable to read. You can choose your preferred engine, configure the engine settings, and speech rate, play a short demonstration of speech synthesis, and display default language status using the options of this menu.
High Contrast Text: Increase the contrast of the menu options and texts to make them easier to read. Highlight this option and press OK to turn this feature on or off.
Restart: A confirmation message will be displayed, select Restart to proceed with restarting. The TV will switch off/on first. Select Cancel to exit.
Channel List
The TV sorts all stored channels in the Channel List. Press the OK button to open the Channel List in Live TV mode. You can press the left directional button to scroll up the list page by page, or press the right directional button to scroll down.
To sort the channel or find a channel in the channel list, press the Yellow button to display the Channel Operation options. Available options are Sort and Find. Sort option may not be available depending on the selected country during the initial setup process. To sort the channels highlight Sort and press the OK button. Select one of the available options and press OK again. The channels will be sorted according to your selection. To find a channel highlight Find and press the OK button. Virtual keyboard will be displayed. Enter all or a portion of the name or number of the channel you want to find, highlight the check mark symbol on the keyboard and press OK. Matching results will be listed.

To filter the channels press Red button. Select Type options will be displayed. You can select among TV, Radio, Free, Encrypted and Favourites options to filter the channel list or select All channels option to see all installed channels in the channel list. Available options may differ depending on the operator selection. Note: If any option except All channels is selected in the Select Type menu, you can only scroll through the channels that are currently listed in the channel list using the Programme +/- buttons on the remote.
Editing the Channels and the Channel List
You can edit the channels and the channel list using the Channel Skip, Channel Swap, Channel Move, Channel Edit and Channel Delete options under the Settings>Channel>Channels menu. You can access the Settings menu from the Home Screen or from the TV options menu in Live TV mode.
Note: The options Channel Swap, Channel Move and Channel Edit may not be available and appear as greyed out depending on the operator selection and operator related settings. You can turn off the LCN setting in the Settings>Channel >Channels menu, as it prevents channel editing. This option might be set to On by default depending on the selected country during the initial setup process.
Managing Favourite Channel Lists
You can create four different lists of your favourite channels. These lists include only the channels that are specified by you. Press the OK button to display the channel list.
To add a channel to one of the favourite lists, highlight that channel in the channel list and press the Blue button. Favourite list selection menu will be displayed. Highlight the list/s you want the channel to be added and press OK. The channel will be added to the selected favourite list/s.
To remove a channel from a favourite list highlight that channel in the channel list and press the Blue button. Favourite list selection menu will be displayed. Highlight the list/s you want the channel to be removed and press OK. The channel will be removed from the selected favourite list/s.
To set one of your favourite channel lists as the main channel list, press the Red button and set the Select Type option to Favourites. Then highlight the desired favourite list and press OK. In order to change the position of a channel in the favourite list press the Yellow button, then highlight the Move option and press OK. Then use the Up and Down directional buttons to move the channel to the desired position and press OK. In order to delete a channel from the favourite list press the Yellow button, then highlight the Delete option and press OK.
Programme Guide
By means of Electronic Programme Guide (EPG) function of your TV, you can browse the event schedule

English – 22 –

of the currently installed channels on your channel list. It depends on the related broadcast whether this feature is supported or not.
Electronic Programme Guide is available in Live TV mode. To switch to Live TV mode you can either press the Exit button or highlight the Live TV app from the Apps row on the Home Screen and press OK. For some countries, the Live TV app will be situated in the Home tab on the Home Screen and the row with this app will be named as Favourite Apps. In order to access the Electronic Programme Guide press the Guide button on the remote.
Use the directional buttons to navigate through the programme guide. You can use the Up/Down directional buttons or Programme +/- buttons to switch to previous/next channel on the list and Right/ Left directional buttons to select a desired event of the currently highlighted channel. If available, the full name, start-end time and date, genre of the highlighted event and a brief information about it will be displayed on the screen.
Press Blue button to filter the events. Due to the large variety of filter options you can find events of the desired type quicker. Press Yellow button to see detailed information on the highlighted event. You can also use the Red and Green buttons to see events of previous day and next day. The functions will be assigned to the coloured buttons on the remote when they are available. Follow the on-screen information for accurate button functions.
Press the Record button to add a timer for the highlighted event in the guide. You can define the type of the timer by setting the Schedule type option as Reminder or Record. When other parameters are set press the Green button. The timer will be added to the schedule list. You can access the schedule list from the Record menu in Live TV mode.
The guide can not be displayed if DTV input source is blocked from the Settings>Channel>Parental Controls>Inputs Blocked menu in Live TV mode or on Home Screen.

Wired Connection Connect your TV to your modem/router via an Ethernet cable. There is a LAN port on the rear-left side of your TV. The status of the connection under the Ethernet section in the Network & Internet menu will change from Not connected to Connected.
1
2
3 1. Broadband ISP connection 2. LAN (Ethernet) cable 3. LAN input on the rear-left side of the TV You might be able to connect your TV to a network wall socket depending on your network’s configuration. In that case, you can connect your TV directly to the network using an Ethernet cable.
1

Connecting to the Internet
You can access the Internet via your TV, by connecting it to a broadband system. It is necessary to configure the network settings in order to enjoy a variety of streaming content and internet applications. These settings can be configured from Settings>Network & Internet menu. You can also highlight the Connected/ Not Connected icon on the Home screen and press OK to access this menu. For further information refer to Network & Internet section under the title of Settings.

2
1. Network wall socket
2. LAN input on the rear-left side of the TV
Wireless Connection
A wireless LAN modem/router is required to connect the TV to the Internet via wireless LAN.
Highlight Wi-Fi option in the Network & Internet menu and press OK to enable wireless connection. Available networks will be listed. Select one and press OK to connect. For more information refer to Network & Internet section under the title of Settings.

English – 23 –

You must change your modem’s SSID when there are

any other modems around with the same SSID. You

1

can encounter connection problems otherwise. Use a

wired connection if you experience problems with a

wireless connection.

A stable connection speed is required to play back streaming content. Use an Ethernet connection if the wireless LAN speed is unstable.

Multi Media Player

1. Broadband ISP connection
A network with hidden SSID can not be detected by other devices. If you want to connect to a network with hidden SSID, highlight the Add new network option under the Settings>Network & Internet menu on the Home Screen and press OK. Add the network by entering its name manually using the related option.
Some networks may have an authorisation system that requires a second login as such in a work environment. In this case, after connecting to the wireless network you want to connect to, highlight Notifications situated on the upper right of the Home Screen and press OK. Then highlight the Sign in to Wi-Fi network notification and press OK. Enter your credentials to log in.
A Wireless-N router (IEEE 802.11a/b/g/n/ac) with simultaneous 2.4 and 5 GHz bands is designed to increase bandwidth. These are optimised for smoother and faster HD video streaming, file transfers and wireless gaming.
Use a LAN connection for quicker data transfer between other devices like computers.
The transmission speed differs depending on the distance and number of obstructions between the transmission products, the configuration of these products, the radio wave conditions, the line traffic and the products that you use. The transmission may also be cut off or may get disconnected depending on the radio wave conditions, DECT phones or any other WLAN 11b appliances. The standard values of the transmission speed are the theoretical maximum values for the wireless standards. They are not the actual speeds of data transmission.
The location where the transmission is most effective differs depending on the usage environment.
The Wireless feature of the TV supports 802.11 a,b,g,n & ac type modems. It is highly recommended that you should use the IEEE 802.11n communication protocol in order to avoid any possible problems while watching videos.

On the Home Screen scroll to Apps row, select Multi Media Player (MMP) and press the OK button to launch. If this app is not available, highlight Add app to favourites option (plus sign) on the Apps row and press OK. Then select the Multi Media Player (MMP) app and press OK to add. For some countries, the Multi Media Player app will be situated in the Home tab on the Home Screen and the row with this app will be named as Favourite Apps.
Select the media type on the main media player screen. On the next screen, you can press the Menu button to access a list of menu options while the focus is on a folder or a media file. Using the options of this menu you can change the media type, sort the files, change the thumbnail size and turn your TV into a digital photo frame. You will also be able to copy, paste and delete the media files using the related options of this menu, if a FAT32 formatted USB storage device is connected to the TV. Additionally you can switch the viewing style by selecting either Normal Parser or Recursive Parser. In Normal Parser mode the files will be displayed with folders if any available. So only the selected type of media files in the root folder or in the selected folder will be displayed. If there isn’t any media files of the selected type, the folder will be assumed as empty. In Recursive Parser mode the source will be searched for all available media files of the selected type and the found files will be listed. Press the Back/Return button to close this menu.
In order to activate photo frame feature select Photo as the media type. Then press the Menu button, highlight Photo Frame and press OK. If you select One Photo mode option and press OK the image that you set as photo frame image earlier will be displayed when photo frame feature is activated. If you select the USB storage device option the first file (in Recursive Parser mode) will be displayed. To set the photo frame image press the Menu button while the photo file of your choice is displayed, highlight Photo Frame Image and press OK.
Additionally, you can toggle between browsing modes by pressing the Blue button. List View and Grid View modes are available. While browsing for the video, photo and text files a preview of the highlighted file will be displayed in a small window on the left side of the screen if the browse mode is set to List View. You

English – 24 –

can also use Programme +/- buttons to jump directly to the first and last folder or file if the view style is set to Grid View.
You can also enable or disable the USB Auto Play feature by pressing the Yellow button. Using this feature you can set your TV to start playing the media content installed on a connected USB storage device automatically. Refer to the USB Auto Play Feature section for more information.
Video Files
Press OK to play back the highlighted video file.
Info: Display the info bar. Press twice to display the extended information and the next file.
Pause/Play: Pause and resume the playback.
Rewind: Start reverse playback. Press consecutively to set the rewind speed.
Fast Forward: Start fast forward playback. Press consecutively to set the forward playback speed.
Stop: Stop the playback.
Programme +: Switch to next file.
Programme -: Switch to previous file.
Back/Return: Return to the media player screen.
Music Files
Press OK to play back the highlighted music/audio file.
Info: Display the extended information and the next file.
Pause/Play: Pause and resume the playback.
Rewind: Press and hold to rewind.
Fast Forward: Press and hold to fast forward.
Stop: Stop the playback.
Programme +: Switch to next file.
Programme -: Switch to previous file.
Back/Return: Return to the media player screen.
If you press Back/Return button without stopping the playback first the playback will continue while you are browsing in the multimedia player. You can use the media player buttons to control the playback. The playback will stop if you exit the media player or switch the media type to Video.
Photo Files
Press OK to display the highlighted photo file. When you press the OK button slide show will also start and all photo files in the current folder or in the storage device, depending on the viewing style, will be displayed in order. If the Repeat option is set to None only the files between the highlighted one and the last listed one will be displayed. Press the OK or Pause/ Play button to pause or resume the slide show. The slide show will stop after the last listed file is displayed and media player screen will be displayed.

Info: Display the info bar. Press twice to display the extended information and the next file.
Pause/Play: Pause and resume the slide show.
Green button (Rotate/Duration): Rotate the image / Set the interval between the slides.
Yellow button (Zoom/Effect): Zoom in on the image / Apply various effects to the slide show.
Programme +: Switch to next file.
Programme -: Switch to previous file.
Back/Return: Return to the media player screen.
Text Files
When you press the OK button slide show will start and all text files in the current folder or in the storage device, depending on the viewing style, will be displayed in order. If the Repeat option is set to None only the files between the highlighted one and the last listed one will be displayed. Press the OK or Pause/Play button to pause or resume the slide show. The slide show will stop after the last listed file is displayed and media player screen will be displayed.
Info: Display the info bar. Press twice to display the extended information and the next file.
Pause/Play: Pause and resume the slide show.
Programme +: Switch to next file.
Programme -: Switch to previous file.
Directional buttons (Down or Right / Up or Left): Switch to next page / Switch to previous page.
Back/Return: Stop the slide show and return to the media player screen.
Menu Options
Press the Menu button to see available options while playing back or displaying media files. The content of this menu differs depending on the media file type.
Pause/Play: Pause and resume the playback or the slide show.
Repeat: Set the repeat option. Highlight an option and press OK to change the setting. If Repeat One option is selected the current media file will be repeatedly played back or displayed. If the Repeat All option is selected all media files of the same type in the current folder or in the storage device, depending on the viewing style, will be repeatedly played back or displayed.
Shuffle On/Off: Turn the shuffle option on or off. Press OK to change the setting.
Duration: Set the interval between the slides. Highlight an option and press OK to change the setting. You can also press the Green button to set. This option will not be available if the slide show is paused.
Rotate: Rotate the image. The image will be rotated 90 degrees clockwise each time you press OK. You

English – 25 –

can also press the Green button to rotate. This option will not be available if the slide show is not paused.
Effect: Apply various effects to the slide show. Highlight an option and press OK to change the setting. You can also press the Yellow button to set. This option will not be available if the slide show is paused.
Zoom: Zoom in on the image that is currently being displayed. Highlight an option and press OK to change the setting. You can also press the Yellow button to zoom in. This option will not be available if the slide show is not paused.
Font: Set the font options. Size, style and colour can be set according to your preferences.
Show Info: Display the extended information.
Photo Frame Image: Set the currently displayed image as photo frame image. This image will be displayed if the One Photo mode is selected instead of the connected storage device while activating the photo frame feature. Otherwise all files will be played back as a slide show when photo frame feature is activated.
Hide/Show Spectrum: Hide or show the spectrum if available.
Lyric Options: Display lyric options if available.
Picture Off: Open the power menu of your TV. You can use the Picture off option here to turn the screen off. Press a button on the remote or on the TV to turn the screen on again.
Screen Mode: Set the aspect ratio option.
Picture Settings: Display the picture settings menu.
Sound Settings: Display the sound settings menu.
Sound Tracks: Set the soundtrack option if more then one available.
Last Memory: Set to Time if you want to resume the playback from the position where it was stopped next time you open the same video file. If set to Off the playback will start from the beginning. Highlight an option and press OK to change the setting.
Seek: Jump to a specific time of the video file. Use the numeric and directional buttons to enter the time and press OK.
Subtitle Encoding: Display subtitle encoding options if available.
From USB Connection
IMPORTANT! Back up the files on your USB storage devices before connecting them to the TV. Manufacturer will not be responsible for any file damage or data loss. Certain types of USB devices (e.g. MP3 Players) or USB hard disk drives/ memory sticks may not be compatible with this TV. The TV supports FAT32 disk formatting, NTFS is not supported. FAT32 formatted devices with a storage capacity larger than 2TB are not supported. Files larger than 4 GB are not supported.

You can view your photos, text documents or play your music and video files installed on a connected USB storage device on the TV. Plug in the USB storage device to one of the USB inputs on the TV.
On the main media player screen select the desired media type. On the next screen, highlight a file name from the list of available media files and press the OK button. Follow the on-screen instructions for more information on other available button functions.
Note: Wait a little while before each plugging and unplugging as the player may still be reading files. Failure to do so may cause physical damage to the USB player and the USB device itself. Do not pull out your drive while playing a file.
USB Auto Play Feature
This feature is used to start playing the media content installed on a removable device automatically. It uses the Multi Media Player application. The media content types have different priorities in order to be played. The reducing priority order is as Photo, Video and Audio. That means, if there is Photo content in content in the root directory of the removable device, the Multi Media Player will play the Photos in a sequence (in file name order) instead of Video or Audio files. If not, it will be checked for Video content and as last Audio.
You can enable the USB Auto Play feature from within the Multi Media Player app. Launch the application on the Home Screen and press the Yellow button on the remote to enable or disable this feature. If the feature is enabled while the USB device is already connected, unplug the device and then plug it back in to activate the feature.
This feature will only work if all of the following circumstances occur:
· The USB Auto Play feature is enabled
· The USB device is plugged in
· Playable content is installed on the USB device
If more than one USB device is connected to the TV, the last one plugged in will be used as content source.
USB Recording
To record a programme, you should first connect a USB storage device to your TV while the TV is switched off. You should then switch on the TV to enable the recording feature. To record long duration programmes such as movies, it is recommended to use USB Hard disk drives (HDD’s). Recorded programmes are saved onto the connected USB storage device. If desired, you can store/copy recordings onto a computer; however, these files will not be available to be played on a computer. You can play the recordings only via your TV. Lip Sync delay may occur during the timeshifting. Radio record is supported.

English – 26 –

If the writing speed of the connected USB storage device is not sufficient, the recording may fail and the timeshifting feature may not be available. It is recommended to use USB hard disk drives for recording HD programmes. Do not pull out the USB/HDD during a recording. This may harm the connected USB/HDD. Some stream packets may not be recorded because of signal problems, as a result sometimes videos may freeze during playback. If a recording starts from timer when teletext is on, a dialogue will be displayed. If you highlight Yes and press OK teletext will be turned off and recording will start.
Instant Recording
Press Record button to start recording an event instantly while watching a programme. Press Stop button to stop and save the instant recording.
You can not switch broadcasts during the recording mode.
Watching Recorded Programmes
Select Record List from the Record menu in Live TV mode and press OK. Select a recorded item from the list (if previously recorded). Press the OK button to watch.
Press the Stop or Back/Return button to stop a playback.
The recordings will be named in the following format: Channel Name_Date(Year/Month/Day)_Programme Name.
Timeshift Recording
In order to use timeshift recording feature Time Shift Mode option in the Record>Time Shift Mode menu should be enabled first.
In timeshifting mode, the programme is paused and simultaneously recorded to the connected USB storage device. Press Pause/Play button while watching a broadcast to activate timeshifting mode. Press Pause/ Play button again to resume the paused programme from where you stopped. Press the Stop button to stop timeshift recording and return to the live broadcast.
When this feature is used for the first time Disk Setup wizard will be displayed when the Pause/Play button is pressed. You can either choose Auto or Manual setup mode. In Manual mode, if you prefer, you can format your USB storage device and specify the storage space that will be used for timeshift function. When the setup is complete, the Disk Setup Result will be displayed. Press OK button to exit.
Timeshift function will not be available for radio broadcasts.

Disk Format
When using a new USB storage device, it is recommended that you first format it using the Format option in the Record>Device Info menu in Live TV mode. Highlight the connected device on the Device Info screen and press OK or Right directional button to see the list of available options. Then highlight Format and press OK to proceed. A confirmation dialogue will be displayed. Highlight Yes and press OK to start formatting.
IMPORTANT: Formatting your USB storage device will erase ALL the data on it and its file system will be converted to FAT32. In most cases operation errors will be fixed after a format but you will lose ALL your data.
Schedule List
You can add reminders or record timers using the Schedule List menu. You can access the Schedule List from the Record menu in Live TV mode. Highlight Schedule List and press OK. Previously set timers will be listed if any available.
Press the Yellow button to add a timer while the Schedule List menu is displayed on the screen. You can define the type of the timer by setting the Schedule Type option as Reminder or Record. When other parameters are set press the Green button. The timer will be added to the list.
If any available, you can also edit or delete the timers on this list. Highlight the timer of your choice and press the Red button to edit. After you edited the timer press the Green button to save changes. Highlight the timer of your choice and press the Blue button to delete. When you choose to delete a timer a confirmation dialogue will be displayed on the screen. Highlight Yes and press OK to delete the selected timer.
A warning message will be displayed if the time intervals of two timers overlap. You can not set more than one timer for the same time interval.
Press EXIT button to close the Schedule List.
CEC
With CEC function of your TV you can operate a connected device with the TV remote control. This function uses HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection.
In order to make use of the CEC functionality the related option in the menu should be switched on. To check, switch on or off the CEC function, do the following:
· Enter the Settings>Device Preferences>Inputs menu on the Home Screen or TV options>Set-

English – 27 –

tings>Device Preferences>Inputs menu in Live TV mode.
· Scroll down to Consumer Electronic Control (CEC) section. Check if the HDMI control option is switched on.
· Highlight the HDMI control option and press OK to switch on or off.
Make sure that all CEC settings are properly set up on the connected CEC device. The CEC functionality has different names on different brands. CEC function might not work with all devices. If you connect a device with HDMI CEC support to your TV, the related HDMI input source will be renamed with the connected device’s name.
To operate the connected CEC device, select the related HDMI input source from the Inputs menu on the Home Screen. Or press the Source button if the TV is in Live TV mode and select the related HDMI input source from the list. To terminate this operation and control the TV via the remote again, press the Source button, which will still be functional, on the remote and switch to another source.
The TV remote is automatically able to control the device once the connected HDMI source has been selected. However not all buttons will be forwarded to the device. Only devices that support CEC Remote Control function will respond to the TV remote control.
The TV supports also eARC (Enhanced Audio Return Channel) feature. Similar to ARC, the eARC feature enables the transfer of the digital audio stream from your TV to a connected audio device via the HDMI cable. eARC is an improved version of ARC. It has a much higher bandwidth than its predecessor. Bandwidth represents the range of frequencies or amount of data that is being transferred at a time. Higher bandwidth translates into a higher amount of data that can be transferred. Higher bandwidth also means that digital audio signal doesn’t have to be compressed and is much more detailed, rich, and vibrant.
When eARC is enabled from the sound menu, TV first tries to establish eARC link. If eARC is supported by the connected device, the output turns into eARC mode and the “eARC” indicator can be observed on the connected device’s OSD. If an eARC link cannot be established (for example, the connected device is not supporting eARC but supporting ARC only) or if eARC is disabled from the sound menu, then TV initiates ARC.
In order to activate ARC feature the eARC option should be set as Auto. You can access this option from the TV options>Settings>Device Preferences>Sound menu in Live TV mode or from Settings>Device Preferences>Sound menu on the Home Screen. When eARC is active, TV will mute its other audio outputs

automatically. So you will hear audio from the connected audio device only. The volume control buttons of the remote will be directed to the connected audio device and you will be able to control the volume of the connected device with your TV remote.
For eARC to function properly;
· The connected audio device should also support eARC. · Some HDMI cables do not have enough bandwidth to
carry high-bit-rate audio channels, use an HDMI cable with eARC support (HDMI High Speed Cables with Ethernet and the new Ultra High Speed HDMI Cable – check hdmi.org for latest info).
Note: eARC is supported only via the HDMI2 input.
Google Cast
With the built-in Google Cast technology you can cast the content from your mobile device straight to your TV. If your mobile device has Google Cast feature, you can mirror your device’s screen to your TV wirelessly. Select Cast screen option on your android device. Available devices will be detected and listed. Select your TV from the list and tap on it to start casting. You can get the network name of your TV from the Settings>Device Preferences>About menu on the Home screen. Device name will be one of the shown options. You can also change the name of your TV. Highlight Device name and press OK. Then highlight Change and press OK again. You can either select one of the predefined names or enter a custom name.
To cast your device’s screen to the TV screen…
1. On your android device, go to Settings’ from the notification panel or home screen 2\. Tap onDevice Connectivity’
3. Tap on the Easy projection’ and enableWireless projection’. Available devices will be listed
4. Select the TV you would like to cast to
or
1. Slide down the notification panel
2. Tap on `Wireless projection’
3. Select the TV you would like to cast to
If the mobile app is Cast-enabled, such as YouTube, Dailymotion, Netflix, you can cast your app to your TV. On the mobile app, look for the Google Cast icon and tap on it. Available devices will be detected and listed. Select your TV from the list and tap on it to start casting.
To cast an app to the TV screen…
1. On your smartphone or tablet, open an app that supports Google Cast
2. Tap the Google Cast icon
3. Select the TV you would like to cast to
4. The app you selected should start playing on TV

English – 28 –

Notes:
Google Cast works on Android and iOS. Make sure that your mobile device is connected to the same network as your TV.
The menu options and namings for Google Cast function on your Android device can differ from brand to brand and can change with time. Refer to your device’s manual for latest information on Google Cast function.
HBBTV System
HbbTV (Hybrid Broadcast Broadband TV) is a standard that seamlessly combines TV services delivered via broadcast with services delivered via broadband and also enables access to the Internet only services for consumers using connected TVs and set-top boxes. Services delivered through HbbTV include traditional broadcast TV channels, catch-up services, video on demand, electronic programme guide, interactive advertising, personalisation, voting, games, social networking and other multimedia applications.
HbbTV applications are available on channels where they are signalled by the broadcaster. The HbbTV applications are generally launched with the press of a coloured button on the remote. Generally a small red button icon will appear on the screen in order to notify the user that there is an HbbTV application on that channel. Press the button indicated on the screen to launch the application.
HbbTV applications use the buttons on the remote control to interact with the user. When an HbbTV application is launched, the control of some buttons are owned by the application. For example, numeric channel selection may not work on a teletext application where the numbers indicate teletext pages.
HbbTV requires AV streaming capability for the platform. There are numerous applications providing VOD (video on demand) and catch-up TV services. The OK (play&pause), Stop, Fast forward, and Rewind buttons on the remote control can be used to interact with the AV content.
Note: You can enable or disable this feature from the TV Options>Advanced Options>HBBTV Settings menu in Live TV mode.
Quick Standby Search
If earlier an automatic search is performed, your TV will search for new or missing digital channels at 05:00 am every morning while in quick standby mode.
And if the Auto Channel Update option in the Settings>Channel menu is enabled the TV will wake up within 5 minutes after it is switched into quick standby mode and search for channels. Standby LED will blink during this process. Once the standby LED stops blinking the search process is completed. Any new found channels will be added to the channel list. If the channel list is updated, you will be informed on the changes at the next power on.

Software Update
Your TV is capable of finding and updating the software automatically via Internet.
To experience the best use of your TV and benefit from the latest improvements make sure your system is always up to date.
Software update via internet
On the Home Screen enter the Settings>Device Preferences>About menu in order to update your Android system version. Move the focus to the System update option and press OK. You will be informed about the system status and the time at which the device was last checked for an update will be displayed. The Check for update option will be highlighted, press OK if you want to check for an available update.
Note: Do not unplug the power cord during the reboot process. If the TV fails to come on after the upgrade, unplug, wait for two minutes then plug it back in.
Troubleshooting & Tips
TV does not switch on
· Make sure the power cord is plugged in securely to the power outlet.
· Disconnect the power cord from the power outlet. Wait for one minute then reconnect it.
· Press the Standby/On button on the TV.
TV does not respond to the remote control
· The TV requires some time to start up. During this time, the TV does not respond to the remote control or TV controls. This is normal behaviour.
· Check if the remote control is working by means of a mobile phone camera. Put the phone in camera mode and point the remote control to the camera lens. If you press any key on the remote control and you notice the infra red LED flicker through the camera, the remote control is working. The TV needs to be checked.
If you do not notice the flickering, the batteries may be exhausted. Replace the batteries. If the remote is still not working, the remote control might be broken and needs to be checked.
This method of checking the remote control is not possible with remote controls which are wirelessly paired with the TV.
No Channels
· Make sure that all cables are properly connected and that the correct network is selected.
· Make sure that the correct channel list is selected.
· Make sure that you have entered the correct channel frequency if you have done manual tuning.

English – 29 –

No picture / distorted picture
· Make sure that the antenna is properly connected to the TV.
· Make sure that the antenna cable is not damaged.
· Make sure that the correct device is selected as the input source.
· Make sure that the external device or source is properly connected.
· Make sure that the picture settings are set correctly.
· Loud speakers, unearthed audio devices, neon lights, high buildings and other large objects can influence reception quality. If possible, try to improve the reception quality by changing the antenna direction or moving devices away from the TV.
· Change to a different picture format, if the picture does not fit the screen
· Make sure that your PC uses the supported resolution and refresh rate.
No sound / poor sound
· Make sure that the sound settings are correctly set.
· Make sure that all cables are properly connected.
· Make sure that the volume is not muted or set to zero, increase the volume to check.
· Make sure that the TV audio output is connected to the audio input on the external sound system.
· Sound may be coming from only one speaker. Check the balance settings from Sound menu.
Input sources – can not be selected
· Make sure that the device is connected to the TV.
· Make sure that all cables are properly connected.
· Make sure that you select the right input source which is dedicated to the connected device.
· Make sure that the right input source is not hidden from the Inputs menu.

HDMI Signal Compatibility

Source

Supported Signals

480i

60Hz

480p

60Hz

576i, 576p 50Hz

720p

50Hz,60Hz

1080i

50Hz,60Hz

HDMI

1080p

24Hz, 25Hz, 30Hz, 50Hz, 60Hz

3840x2160p

24Hz, 25Hz, 30Hz, 50Hz, 60Hz

4096x2160p

24Hz, 25Hz, 30Hz, 50Hz, 60Hz

In some cases a signal on the TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc. ). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

English – 30 –

Supported File Formats for USB Mode
Video Decoder

Video Codec

Resolution

Bit Rate

Profile

Container

VP9

4096×2176@60fps 100Mbps

HEVC/H.265

4096×2176@60fps 100Mbps

MPEG1/2

1920×1080@60fps 80Mbps

MPEG4

1920×1080@60fps 40Mbps

Sorenson H.263 1920×1080@60fps 40Mbps

H.263

1920×1080@60fps 40Mbps

H.264

4096×2304@60fps 135Mbps

AVS AVS+ AVS2 WMV3

1920×1080@60fps 50Mbps 1920×1080@60fps 50Mbps 4096×2176@60fps 100Mbps 1920×1080@60fps 40Mbps

VC1

1920×1080@60fps 40Mbps

Motion JPEG

1920×1080@30fps 40Mbps

VP8 RV30/RV40 AV1

1920×1080@60fps 50Mbps 1920×1080@60fps 40Mbps 4096×2176@60fps 100Mbps

Profile 0 (420 8-bit) Profile 2, (420, 10-bit)

MKV (.mkv), WebM (.webm)

Main (8-bit)/Main10 (10-bit) Profile, High Tier @ Level 5.1

MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), MPEG transport stream (.ts, .trp, .tp), MKV (.mkv), FLV (.flv), AVI (.avi), H265 (.265)

MP@HL

MPEG program stream (.DAT, .VOB, .MPG, .MPEG), MPEG transport stream (.ts, .trp, .tp), MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), AVI (.avi), MKV (.mkv), ASF (.asf), WMV (.wmv), OGM (.ogm)

· Simple Profile

MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), AVI (.avi), MKV (.mkv), ASF (.asf), WMV

· A d v a n c e d S i m p l e (.wmv), FLV (.flv), OGM (.ogm), MPEG

Profile @Level 5

transport stream (.ts, .trp, .tp), MPEG

· GMC is not supported program stream (.DAT, .VOB, .MPG, .MPEG)

FLV (.flv), AVI (.avi)

Baseline Profile Only

FLV (.flv), MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), AVI (.avi), ASF (.asf),
WMV (.wmv)

Main and high profile up to level 5.2

FLV (.flv), MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), MPEG transport stream (.ts, .trp, .tp), ASF (.asf), WMV (.wmv), AVI (.avi), MKV (.mkv), OGM (.ogm), MPEG program stream (.DAT, .VOB, .MPG, .MPEG), H264 (.264)

Jizhun profile @ Level MPEG transport stream (.ts, .trp, .tp),

6.0

MP4 (.mp4, .mov), AVS (.avs)

Broadcasting Profile @ MPEG transport stream (.ts, .trp, .tp),

Level 6.0.1.08.60

AVS (.avs)

Main (8-bit)/Main10 (10-bit) Profile @Level 8.2.60

MPEG transport stream (.ts, .trp, .tp), AVS2 (.avs2)

ASF (.asf), AVI (.avi), MKV (.mkv), WMV (.wmv), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov), OGM (.ogm)

· Advanced Profile @ Level 3
· Simple Profile · Main Profile

MPEG transport stream (.ts, .trp, .tp), ASF (.asf), WMV (.wmv), AVI (.avi), MKV (.mkv), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov), VC1 (.vc1)

AVI (.avi), 3GPP (.3gpp, .3gp), MP4
(.mp4, .mov), MKV (.mkv), FLV (.flv), OGM (.ogm)

MKV (.mkv), WebM (.webm), FLV (.flv), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov),
AVI (.avi), OGM (.ogm)

RM (.rm, .rmvb), MKV (.mkv)

Main Profile @Level 5.1

MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), MKV (.mkv), WebM (.webm)

English – 31 –

Video Encoder

Video Codec
H.264
Audio

Max Resolution 1920×1080@30fps

Max Bit Rate
12Mbps

Profile

Note

Main profile, level 4.1 Hardware video encoder

Audio Codec

Sample rate Channel Bit Rate

Container

Note

MPEG1/2 Layer1 16KHz ~ 48KHz Up to 2

32Kbps ~ 448Kbps

MPEG1/2 Layer2 16KHz ~ 48KHz Up to 2

8Kbps ~ 384Kbps

MP3 (.mp3), AVI (.avi), ASF (.asf), WMV (.wmv), MKV (.mkv, .mka), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov, m4a), MPEG transport stream (.ts, .trp, .tp), MPEG program stream (.DAT, .VOB, .MPG, .MPEG), FLV (.flv), WAV (.wav), OGM (.ogm)
MP3 (.mp3), AVI (.avi), ASF (.asf), WMV (.wmv), MKV (.mkv, .mka), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov, m4a), MPEG transport stream (.ts, .trp, .tp), MPEG program stream (.DAT, .VOB, .MPG, .MPEG), FLV (.flv), WAV (.wav), OGM (.ogm)

MPEG1/2/2.5 Layer3
AC3(DD)
EAC3(DDP)
AAC-LC, HEAAC WMA WMA 10 Pro M0

8KHz ~ 48KHz
32KHz, 44.1KHz, 48KHz
32KHz, 44.1KHz, 48KHz
8KHz ~ 48KHz
8KHz ~ 48KHz 8KHz ~ 48KHz

Up to 2 Up to 5.1 Up to 5.1
Up to 5.1 Up to 2 Up to 2

8Kbps ~ 320Kbps
32Kbps ~ 640Kbps
32Kbps ~ 6Mbps
AAC-LC: 12Kbps~ 576Kbps V1 6Kbps ~ 288Kbps V2: 3Kbps ~ 144Kbps 128Kbps ~ 320Kbps
< 192Kbps

MP3 (.mp3), AVI (.avi), ASF (.asf)

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals