Powxs 18650 Universal Battery Charge User Manual
- June 14, 2024
- POWXS
Table of Contents
Powxs 18650 Universal Battery Charge
OVERVIEW
Features
- Can charge 112/314 pieces ANAANC/D Ni-MH Ni-CD batteries and 112 pieces 9V Ni-MH Li-ion batteries.
- The LCD will display the charging progress of AA, AAA, C, D batteries and the LED for 9V battery.
- Discharge Function: AA AAA CD Slot can discharge, may remove the memory effect of the batteries.
- With advanced MCU control system, intelligent -L. V cut-off charging method, the charger turns to trickle charging automatically to prevent the batteries from over-voltage, over-current and over-heat.
- If the battery voltage is between 0.4-0.9V, the charger will renovate it automatically.
- Powered by DC 5V/2.0A Micro USS and Type C input port, worldwide usage, more convenient.
- Constant current charging mode would protect the battery against current fluctuation and keep using the charger safely.
Specifications
- Input: DC 5V/2A
- Output: AA, AAA, C, D 1.2V DC’4 1000mA, 9V DC 80mA’2 Discharge Current: 300-800mA
- Battery Charging Rate: up to 80%
Working Environment Condition
- Storage Temperature: -10 C- 50 C
- Storage Humidity: 45% – 85%
- Working Temperature: 0 C- 35 C
- Working Humidity: 35% – 95%
How to Use
- Plug in the Micro USB/Type C cable and power on: LCD screens light up and show every character on screen first then character disappear.
- Make sure the batteries are placed correctly, make the”+/.” poles of the batteries are corresponding to the”+/-“of the charger.
- Charging AA/AANC/D Ni-MH Ni-CD rechargeable batteries: One LCD corresponds to one slot, when the LCD indicator shows “ ” means the batteries have been fully charged. And the charger is individual, could charge different type and capacity compatible batteries at the same time.
- Charging 9V Ni-MH Li-ion rechargeable batteries: the LED will always keep red light on, then the light turns green when the battery is full.
- Discharge: Press the button to change mode, LCD screen will display “DISCHG” while discharging. Please note that the charger will automatically turn to charging mode “CHG” after the battery is discharged.
- “ERROR”: If the battery is broken (0 Volt) and installing battery incorrectly, the charger will shows *ERROR” to remind you obviously.
Notice
- If the indicator light does not turn on while charging, please check firstly if the battery is normal and if the installation is correct.
- New battery will reach the best performance after 2-3 times charge and discharge.
- Battery power will lose because of long-time storage. Please charge the battery fully if it is not used for long time.
- Cutting off the power supply when you don’t need to charge the battery and take out the battery after fully charged.
- It’s normal that the battery becomes hot while charging. The temperature will cool down to normal later, please feel free to use it.
- Please note that Micro USB and Type C input ports can not be simultaneously powered on.
Important Safety Instructions
- The charger can only charge for AA, AAA, C. D Ni-MH Ni-CD rechargeable battery and 9V Ni-MH Li-ion rechargeable battery. II may cause explosion, battery broken, leakage, personal injure and damage to property if charging other types of battery.
- DO NOT disassemble and reassemble the charger. Or it may cause short-circuit.
- DO NOT put anything on the charger while charging batteries. it will accumulate heat 1o cause fire hazard.
- Indoor use only, keep it away from direct sunlight and moisUhigh-temperature environment.
- Children should not use this charger without any adult’s supervision.
- Please place it under the safe place where the children can not reach up to.
Size & Weight
- Size: 195mm x 93mm x 52mm
- Weight: 252g
Warranty
We provide 30 days worry-free money back and one year limited warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>