Blukar K9756 Car Phone Holder User Guide
- June 14, 2024
- Blukar
Table of Contents
K9756 Car Phone Holder
User Guide
K9756 Car Phone Holder
Welcome
Thank you for purchasing this Bulker product In order to ensure optimum
performance and safety, please read this user manual carefully and keep it for
future reference. If you need any additional assistance, please contact our
customer support team or send us an email to
support@blukartech.com
Product Specifications
Product Name Gooseneck Car Phone Holder Materials. ABS+PC Compatible Phone
Size 4.06.7 inches Structure Diagram 
Installation Steps
-
Loosen the foxed nut completely. pass the ball joint through the fixed nut (The thread must face the groove) and push it to the groove behind the car holder firmly
-
Tighten the foxed nut
-
Clean the area where the car holder is to be installed (dashboard/windshield) with a damp cloth and wait for it to dry
-
Open the suction cup lock, peel off the protective film from the suction cup and attach the suction cup to the dashboard/windshield Press the suction cup firmly to make it firm, then Press the suction cup lock to fix the suction cup. (Tip: The suction cup will stick better if left to stand for 24 hours after locking.)
-
Press down on the suction cup and adjust the goose neck to align it with the line of sight
-
Confirm the position of the holder (note that the distance between the goose neck and the dashboard should not be higher than the 3M adhesive foxed base), clip the 3M adhesive foxed base to the goose neck, peel off the 3M adhesive foxed base protective film and stick it to the dashboard so that the holder will remain stable
Using Steps
-
Press the quickrelease button and the damp arms will automatically open
-
Place the phone and push the clamps on both sides to close them and hold the phone firmly
-
The supporting feet can be adjusted in different lengths to suit different sizes of mobile phones
-
After use, press the quickrelease button again to open the clamps and remove the phone
Attentions
- Before you start driving and navigating, please install the car holder in a suitable position, do not adjust the car holder while driving
- Do not mount the car holder in a place where it will interfere with the airbag and driving operation
- Keeps the car holder away from children
TEL: 18003605881
EMAIL: support@blukartech.com
WEBSITE: www.blukartech.com
0 Shenzhen Teng Xun Zhan Yi Technology Co, Ltd
All rights reserved
Product Name: Car Phone Holder
Model: K9756
Manufacturer: Shenzhen Teng Ken Zhan Yi
Technology Co, Ltd
Manufacturer Address: Room 302, Building 8, Yunlin
Intelligent Park, Fade Road, Bantian Street, Longing
District, Shenzhen, Guangdong, China