Papeaso B14uFYAwGxL Video Capture Card User Manual
- June 14, 2024
- Papeaso
Table of Contents
B14uFYAwGxL Video Capture Card
User Manual
STEPS FOR USB VIDEO CAPTURE (OBS)
- Open the software and add new sources
- choose “Video Capture Device”
- Click:-USB3.0 Video-Custom-1920*1080-Match- YUY2Choose the “Resolution” and “FPS” that match vour device.
- Set the audio output as following:(√ the “Use custom audio device”)
- Click “settings” in the bottom right of OBS Studio
Click “Audio”at the left;Click “48K” at Sample Rate;
Click “Stereo”at Voice Channel ; Click “USB 3.0 Audio
Device’at Mic/Auxiliary Audio Device.When the audio setting is finished, restart the OBS audio system Otherwise it will cause no sound output.
- Click “Studio Mode”
Click “Double Window (Optional)
Click “Start Recording”
Note:
Computer hardware configuration requirements CPU:PC i5-3400 or above;
NB i7-3537U2.0GHZ or above
Graphics card:PC NVIDIA GT630 or above
NC NVIDIA GT735M or above
Run memory:4G RAM
- Click “Studio Mode”
Product Introduction:
This USB 3.0 capture card can capture HDMI video and HDMI audio at the same time, and can transmit audio and video signals to a computer or smartphone for preview and storage. Suitable for high-definition acquisition, teaching recording, medical imaging, etc.
Product Specifications:
HDMI resolution: Max to 3840×2160@60Hz
Video input format: 24/30/36bit Deep color
Video output format: YUY2/M JPEG
Video output resolution: Max to 1920 x 1080@60Hz
Support audio format: L-PCM
Support AWG26 HDMI Standard Cable: input <15 meters, AWG26 HDMI standard
cable
Support most acquisition software, such as VLC / OBS / Amcap, etc
Support multiple operating systems, such as Windows / Android / MacOS
Interface: USB 3.0
Conform to USB Video and UVC standard;
USB Audio UAC standard
Max working current: 0.4A/5V DC
Operating temperature range: (-10 to + 55 °C)
Weight: 21.4g
Packaging Includes:
1 Audio Video Capture Card
1 User Manual
Features:
Without external power supply, compact and portable Easy to do live streaming,
no driver needed Works with most device, such as PC,Laptop. Linux
System, Mac,Camera
Works with ZOOM,OBS,XBOX, Youtube, Face Live, Twitter, Twitch and more
Easy Setup, just add the server host and token of your live
Connecting operation:
- Connect the UHD signal source with the HDMI input port of the USB capture card through 1 HDMI cable.
- Plug the USB male header of the USB capture card into the USB port of the computer.
- Acquisition steps (OBS): Open the software — add a new source — select ‘video capture device’ > set the screen size select ‘Studio Mode’ (dual window) > click ‘Start Recording‘(as shown in the example below).
Note: Computer hardware configuration requirements CPU: PC i5-3400 or
above; NB i7-3537U 2.0GHZ or above
Graphics card: PC NVIDIA GT630 or above; NC
NVIDIA GT735M or above
Storage: 4G RAM
Tips:
Better not to use USB hub/extend cable, it may not work. Connect to your
PC,Mac,Laptop Directly.
Low PC configuration will cause lag in the recording and lower performance.
Make sure choose right audio input device if you connected many devices.
If you connect with DSLR or camera, pls finish setting of camera,then restart
camera to ensure input.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>