HUION HS611 Graphics Drawing Tablet Android Instruction Manual

HUION HS611 Graphics Drawing Tablet Android

Precautions

Please read this manual carefully before using it, and keep it well for future reference.?

• Before cleaning the tablet please unplug the power cord and wipe with a soft damp cloth, do not use any kind of detergents.
• Don’t expose this product to water or other liquids. Take care to never spill liquids onto the tablet and pen. Exposing this product to water or other liquids may cause product malfunction or electrical shock.
• Do not place the tablet where is unstable or at a height for children to reach easily to avoid danger.
• Prevent children from swallowing the pen nib or side switch. The pen nib, side switch, or other movable parts may accidentally be pulled out if children are biting on them.
• Power off your tablet in locations where/when electronic devices are not allowed.
• Because the tablet may cause other electronic devices to malfunction in some locations where/when the use of electronic devices is not allowed, such as within an aeroplane, be sure to turn off the tablet.
• Do not disassemble the tablet and pen. Do not disassemble or otherwise modify the tablet or pen.
• Such action may cause heat generation, ignition, electronic shock, or other damage, including human injury. Disassembling the product will void your warranty.
• While getting the components replaced, you are supposed to guarantee that the repairman is using the substitute components specified by the manufacturer.
• Unauthorized component replacement might cause fire, electric shocks or other dangers.
• Do not insert foreign material into the USB port or any other opening of this product.
• If a metal object or foreign material is inserted into a port or other opening of this product it may cause the product to malfunction or burn out, or cause electronic shock.

Product Overview

Tablet Introduction
Thanks for choosing the HUION® INSPIROY® HS611 creative pen tablet. This is a new generation of professional battery-free drawing tablets, which can greatly improve your work efficiency of painting and creation, and full of fun. You can freely paint and write, depicting different lines and colours, just as the pen writes on the paper, which brings you a real shock experience. To give you a better understanding and use of your tablet, please read this user manual carefully. The user manual only shows the information under Windows, unless otherwise specified, this information applies to both Windows and Mac systems.

Product and Accessories

Tablet Connection
Connecting to Computer Connect the tablet to your computer with a USB cable.

1. Take out the Usb cable from the package, then connect the tablet to your computer.
2. Open the driver interface, the lower corner shows the device connected, indicating that the tablet is successfully connected to the computer. You can start using the tablet.

Connecting to Android Phone & Tablet

1. Please make sure your phone & pad OS is as follows: Android OS 6.0 or later.
2. For some models, you need to go phone or pad “Settings” and then enable the “OTG” function.
3. Choose the right OTG Adapter from the package, which depends on the USB port type of your phone, then connect the pen tablet to your phone following the illustrations below:

Notes

1. The pen tablet can work without installing any driver into your phone.
2. Once connected, the tablet will automatically enter phone mode, in which the pen can only work in the left grey area.
3. Please note that the press keys of the pen tablet and digital pen are not supported in phone mode.

Install Driver

OS Support
Windows 7 or later, macOS 10.12 or later.

Install Driver
Please download the driver from our website: www.huion.com/download. After finishing an installation, you can find the driver icon ” ” in the system tray area, which means the driver was installed successfully; when you connect the tablet to the computer, the icon will change to a colour which means the driver has already recognized the tablet and you can start using it now.

Notes

1. Before installing, you need to uninstall another driver of similar products, including the old driver of this product.
2. Before installing, please close all graphics software and anti-virus software to avoid unnecessary mistakes.

Driver Page
After the download is successful, double-click to open the driver and connect the tablet to your computer and phone using a USB cable. When the connection is complete, watch for a prompt at the bottom left of the driver page that displays two states: “Device disconnected” or “Device connected”.

Pen Basic Operation

Hold the pen
Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can toggle the side switch easily with your thumb or forefinger. Be careful not to accidentally press the switch while drawing or positioning with the pen.

Notice
When not in use, place the pen in the pen case or on the desk. Do not place the pen on the surface of screen, which may interfere with the use of other screen cursor positioning equipment, may also cause your computer can not enter sleep mode.

Position the cursor
Move the pen slightly above the active area without touching the screen surface, the cursor will move to the new position accordingly. Press the pen tip on the screen to make a selection. Tap the screen once with the pen tip, or touch it to the screen with enough pressure to register a click.

Click
Use the pen tip to tap once on the screen to register a click. Tap to highlight or select an item on the screen and double-click to open it.

Move
Select the object, then slide the pen tip across the screen to move it.

Use the side buttons

• The buttons on the pen can be set to two different customizable functions.
• You can use the buttons whenever the pen tip is within 10mm of the tablet’s active area.
• You do not have to touch the pen tip to the tablet to use the switch.

Pen Nib Replacement
The nib will be wear off after using for a long time, then you need to replace a new nib.

1. Anticlockwise rotate the pen holder to open the cover, take a new nib out.
2. Insert the pen nib into the hole on the bottom of the holder and tilt the pen to pull out the old nib.
3. Insert the new nib straight into the pen and push the nib slowly and firmly until it stops.

Function Setting

Working Area Setting

Using Multiple Monitors
Select the Working Area tab to define the relationship between pen movement on the tablet and cursor movement on the monitor screen. By default the entire active area of the tablet maps to the entire monitor. If more than one monitor is in use and you are in extended mode, you need to choose the related monitor on the driver interface that you are going to map to.

Working Area Setting
Define the tablet area that will be mapped to the screen area.

1. Full Area: the entire active area of the tablet. This is the default setting.
2. Screen Ratio: As a general rule, be 16:9.
3.  Customized Area:

Enter coordinate values
Drag the corners of the foreground graphic to select the screen area.

Rotate Working Area
By changing the direction of the tablet to adapt to the left and right-hand operation. You can rotate the tablet by 0° , 90° , 180° or 270° .

Tablet Setting
Click the ” ” in the upper right corner of the driver to set the Tablet, including General settings, Hotkeys and Updates.

General settings
Add App: The shortcut key function can be set by adding different programs. When opening different programs, the driver will automatically recognize that the shortcut function is the corresponding function set.

Hotkeys settings
Set the shortcut key to quickly open the driver interface. The default value is Ctrl+Alt+H, which can be set according to usage habits.

Updates
You can view the driver version number, click “Check for Update”, view the latest driver version, and update according to the system prompt. Press Keys Function Setting then click “Apply” or “OK” to take effect. Enable/Disable Press Keys: Check/Uncheck “Enable Press Keys”.

Enable the Windows Ink featur e
Microsoft Windows provides extensive support for pen input. Pen features are supported in such as Microsoft Office, Windows Whiteboard, Adobe Photoshop CC, SketchBook 6 and so on.

Pressure Sensitivity Setting
The pressure sensitivity will be changed by dragging the slider up and down, the smaller the value, the more pressure sensitive. Drag upward (left): the pressure change is more obvious, small pressure produces great pressure. Drag down (right): pressure change is weak, a lot of pressure produces less pressure. Click the button at the bottom right of the Settings box to reset the pressure sensitivity to the default state. For example: applying the same pressure, under different pressure coefficients produced different pressure effects. According to their habit of holding the pen posture and the size of the hand for the appropriate pressure Settings.

Pen Pressure Testing
You can gradually apply pressure to the stylus on the screen to test the pressure level.

Pen Nib Activity Setting
The pen nibs can be set to be Active/Inactive as needed. Click the drop-down option to select, and click OK again to save the Settings. In Active mode, the digital pen can be used normally. In Inactive mode, the digital pen has cursor movement, but cannot complete the specified action.

Data Export and Import

The driver supports exporting and importing your custom configuration data of the product, which is convenient for you to use different software and avoid the trouble of repeated settings.

Specifications

Tablet

Model| HS611
Touch Technology| Battery-Free Electromagnetic Resonance
Working Area| Computer:258.4*161.5mm Android:90.1 x 161.5mm
Dimension| 333.4 x 218.4 x 7.3mm
Net Weight| 550g
Touch Resolution| 5080LPI
Report Rate| 266PPS
Pen Sensing Height| 10mm
Interface| USB-C
Press Keys| 10 Programmable Press Keys+8 Multimedia Keys

OS Support

| Windows 7 or later, macOS 10.12 or later Android 6.0 or later
Digital Pen
Model| PW500
Dimension| 163.7 x <l14.3mm
Weight| 14g
Pressure| 8192Levels
Accuracy| ±0.3mm

Trouble Shooting

There is no pressure in the graphics software but the cursor moves

| ****

You may have installed other tablet drivers or opened the drawing software when installing the driver. Please uninstall all drivers and close the drawing software, then reinstall the Huion driver. It’s better to restart your computer after finishing

the installation.’

The pen does not work

| ****

1.  Make sure you are using the pen that originally came with your tablet.

2.  Make sure you installed the driver correctly.

Press Keys does not work

| 1.  Make sure the Press Keys function were enabled in the driver.

2.  Make sure you have correctly defined the Press Keys.

3.  Check if the press lock switch is on the unlock position.

The computer can’t enter sleep mode

| ****

When you are not using the tablet, please do not put the pen on the tablet surface, which will keep the computer awake.

The side button of the pen doesn’t work

| ****

When pressing the side button, please make sure that the nib didn’t touch the tablet surface and the distance between the nib and surface is within 10mm.

The side button of the pen doesn’t work| Make sure the USB port is functional, if not, please change to another USB port.

After-service Contact
SHENZHEN HUION ANIMATION TECHNOLOGY CO., LTD.
Bldg 28, Quarter 4, HuaiDeCuiGang Industrial Park, Fuyong Street, Bao’an District, Shenzhen, 518106, China

References

• Creative Pen Displays & Tablets for Drawing - Huion
• huion.com/download

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>