sarmert QPCJL0002A 3 Lead Hard Wire Kit Micro USB Port for DC21 DC42 Dash Cam Owner’s Manual

June 14, 2024
sarmert

sarmert QPCJL0002A 3 Lead Hard Wire Kit Micro USB Port for DC21 DC42 Dash

Cam

About the Hardwire Kit

sarmert-QPCJL0002A-3-Lead-Hard-Wire-Kit-Micro-USB-Port-for-DC21-DC42-Dash-
Cam-FIG-1

3-wire hardwire kit, as photo below

  • RED wire marked ACC, which is connected with Fuse Box ACC, can make auto turn off when the vehicle is on and off.
  • YELLOW wire marked B+, which is connected with a constant fuse, can remain on even when the vehicle is off.
  • BLACK wire marked GND, which is connected with a metal bolt or screw, can prevent electric shock.

Voltage Adjustable and Digital Display Hardwire Kit

  • Output: SV /2.SA
  • Input {Voltage Setting Range): 12V: 71-13.SV, 24V: 23-25V Display: LED
  • Press and hold any button for 3 (three) seconds, and the display turns on, n+” UP, increment by 0.1V each time press,”-” DOWN, reduction by 0. lV each time press, to adjust and set Low Voltage Protection value.
  • No operation for more than 5 (five) seconds, display flashes 3 (three) times then turns off.
  • When the voltage gets the set value, Low Voltage Protection turns on in the 60s.
  • When car ignition is on, Low Voltage unprotects.

Installation

Step 1: Locate Your Fuse Box
Depending on the model of your vehicle, you may need to remove some trim or open some panels to find it.

Step 2: Using Fuse Adapters for Installation

  • Connect the hardwire kit red wire and yellow wire with the Fuseadapter, and plug inside the fuse box.

sarmert-QPCJL0002A-3-Lead-Hard-Wire-Kit-Micro-USB-Port-for-DC21-DC42-Dash-
Cam-FIG-3

  • connect the black wire with the metal bolt or screw in your vehicle. An unpainted bare metal bolt or crew is better. Should ONLY be connected with metal, and can NOT be attached to any other materials, such as plastic.

Tips:
Depending on your vehicle, you may need to decide which fuse adapter is right for you. There are many types, ACZ(Micro2), ACS(Mini), ACN(LP-Nini) and ACU(ATO) as photo below.

If you are using a fuse slot that has an existing fuse in it, arrange the fuse as photo below. sarmert-QPCJL0002A-3-Lead-Hard-Wire-Kit-Micro-USB-Port-for-
DC21-DC42-Dash-Cam-FIG-5

Step 3: Wiring and hiding, as below

sarmert-QPCJL0002A-3-Lead-Hard-Wire-Kit-Micro-USB-Port-for-DC21-DC42-Dash-
Cam-FIG-6

Step 4: Connect the cable with the Dashcam, and turn on the ignition to test the installation.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

sarmert User Manuals

Related Manuals