RAYMOND WEIL 2761-STC-50001 GMT Blue Leather Smart Watch Instruction Manual
- June 14, 2024
- RAYMOND WEIL
Table of Contents
INSTRUCTIONS FOR USE
REF. 2765
SELF-WINDING MECHANICAL WATCHES
WITH GMT WORLDTIMER FUNCTION
2761-STC-50001 GMT Blue Leather Smart Watch
INTRODUCTION
Congratulations on your choice of a watch from the prestigious RAYMOND WEIL
collection, a dynamic expression of masterful design and the constant
objective of supreme quality that have been the hallmarks of the brand since
its creation. Your RAYMOND WEIL watch was handassembled by our master
watchmakers according to the most rigorous quality standards of the Swiss
watch industry. In order to guarantee the perfect functioning of your RAYMOND
WEIL watch for many long years, we thank you to pay close attention to the
advice contained in these Instructions for Use as well as in the International
Guarantee booklet. Your watch has a selfwinding mechanical movement with a GMT
function, and it has a running reserve of 50 hours.
Note: if your watch has stopped, before any adjustment it is necessary to wind
it manually by turning the 2 pm crown clockwise 20-30 times. When you wear the
watch, it will wind automatically with the natural movements of your wrist.
DESCRIPTION OF THE DIAL
The freelancer GMT Worldtimer is marked with a flange displaying 24 cities.
This enables to display 24 different time zones simultaneously thanks to the 24
hour hand.
CHANGING THE DATE AND SETTING THE TIME
Your RAYMOND WEIL freelancer watch is fitted with a screw-down crown. Before
winding or adjusting the watch, it is therefore necessary to unscrew the crown
by turning it anti-clockwise (position I > position II ). The crown will then
be released by a spring. After adjusting settings, press the crown and gently
turn it clockwise, and then screw it carefully down to maintain your watch’s
water-resistance.
CHANGING THE DATE
To change the date quickly, pull the crown out to position III . Then turn
the crown towards you, anti-clockwise, until the desired date appears in the
window. Automatic date change occurs daily when the hour hand passes midnight.
Your watch continues to operate during this process and therefore the time
does not have to be reset. Never change the date when the watch indicates a
time between 22.00 and 02.00 The automatic date change mechanism operates
during this period and any manual procedure could damage the movement. After
any date adjustment, always return the crown to position II , and then
screw down the push-button securely to maintain your watch’s water-resistance.
SETTING THE TIME
To set the time, pull the crown out to position IV and turn it forwards or
backwards until the hands indicate the exact time. After setting the time,
always return the crown to position II to restart the hands, and then screw
the crown down carefully to maintain your watch’s water-resistance.
SETTING THE SECOND TIME ZONE HAND
To adjust the 24 hour hand (or the second time zone hand), pull the crown out
to position III and turn it away from you, clockwise, until the GMT hand
indicates the exact time at your destination or your home. Your watch
continues to operate during this process and therefore the time does not have
to be reset. After setting the time, always return the crown to position II ,
and then screw the crown down carefully to maintain your watch’s water-
resistance.
In the example
below, the main time (10h08) corresponds to Geneva time, and the GMT hand
(9h08) shows the time in London.
DISPLAYING THE 24 TIME ZONES
To display the 24 time zones, pull out the crown to position II , and turn
the flange until the city of the second time zone is aligned with the GMT hand.
The 24 time zones are aligned to the corresponding time using the 24H zone.
