PAMRAY 91WmMhCF7hL 32 Inch Computer Desk for Small Spaces Instruction Manual
- June 14, 2024
- PAMRAY
Table of Contents
PAMRAY 91WmMhCF7hL 32 Inch Computer Desk for Small Spaces
Product Information
The product is designed to improve the quality of life. It consists of various parts, including X-shape braces and A parts. The assembly process requires careful attention to detail and following the provided instructions.
Attention:
- a. To ease the assembly process, avoid tightening the screws completely until all other parts are assembled.
- b. If you have any questions or need assistance, please contact our customer service at [email protected]. We are committed to your satisfaction.
- c. To facilitate the installation of the X-shape brace, ensure that the two holes in the middle section of one side of the two A parts are kept on the same side.
- d. If you encounter any difficulties during assembly, try flipping the X-shape brace to the other side and install it again. It has two sides.
Product Usage Instructions
- Begin by assembling the various parts according to the provided instructions.
- When attaching the A parts, make sure to align the two holes in the middle section of one side on the same side to facilitate the installation of the X-shape brace.
- If you encounter any difficulties during assembly and feel that it is not smooth, try flipping the X-shape brace to the other side and installing it again.
- Continue assembling all the parts until the desired configuration is achieved.
- Tighten all the screws, ensuring a secure and stable assembly.
Attention:
- a. In order to help your assembly, do not fasten the screws tightly until you have assembled all the other parts.
- b. Please feel free to contact us. Our customer service can assist you with any questions about the product.
- Email: [email protected]. Your satisfaction is our highest pursuit.
- c. Please keep the 2 holes ( In the Middle Section of One Side ) of the two “A” parts on the same side to facilitate the installation of the X-shape brace.
- d. Since the X-shape brace has two sides when you feel not smooth during assembling, please flip to the other side and install again.
PARTS AND HARDWARE
Attention
Please keep the holes (In the Middle Section of One Side) of the two “A”
partson the same side to facilitate the installation of the X-shape brace.
Attention
Since the X-shape brace has two sides, when you feel not smooth during
assembling, please flip to the other side and install it again. 
Damping nuts optimized the stability
Attention: Please simultaneously use the wrench included in the package
to hold the screw in place when tightening screws with a hexagonal
screwdriver. Without this essential step, the screw will not be properly
tightened.
INSTALLATION
