igritin G1392 Disco Lights User Guide
- June 14, 2024
- igritin
Table of Contents
igritin G1392 Disco Lights
Welcome
- Thank you for purchasing this Gritin product.
- To ensure optimum performance and safety, please read this user manual carefully and keep it for future reference.
- If you need any additional assistance, please contact our customer support team or send us an email to [email protected].
Package Contents
- 1 x Mini Disco Light
- 1 x Lampshade
- 1 x Remote Control
- 1 x Sucker Base
- 1 x Micro USB Charging Cable
Specifications
- Product Size: 81 x 81 x 100mm
- Weight: 250g
- Battery Capacity: 800mAh
- Power: 5W
- Input Voltage: DC 5V/1A
How to Install
- Attach the sucker to the bottom of the mini disco light and fix it to glass, ceramic or any other smooth surface or just place it on the table/floor and then you can enjoy the wonderful lighting show from the walls and ceiling.
Instructions for Use
- Ensure that the product is fully charged before use and that the body switch is set to RGB or W gear position.
- You can choose your desired mode and lighting effect via the remote control. (Note: The remote control can only be used when the body switch position is set to RGB and W.)
- When the battery runs out, charge the product via the included Micro USB charging cable.
Note: red light on when charging, blue light on when fully charged.
Remote Functions
Warnings
- Before installation, ensure that the power to the appliance is switched off and that the area around the appliance is well-ventilated.
- The light source in this luminaire may only be replaced by the manufacturer its service agent or a similarly qualified person.
- Do not look directly at the light-emitting device for a long time to avoid eye irritation.
Attention
- Do not disassemble the product yourself.
- Avoid drops, impacts and squeezes.
- Keep it away from water, fire, flammable gases and corrosive liquids.
- Do not place the product near flammable, explosive or dangerous objects.
- Do not use it in humid environments for a long time.
- Please wipe the machine with a clean cloth to keep it clean.
- This product operates at an ambient temperature of 10-40°C. To prolong the life of the product, please switch off the power for 10 minutes after three hours of continuous operation to allow the machine to cool down.
Read User Manual Online (PDF format)
Loading......