BRAUN BC08W Digital Travel Alarm Clock User Guide
- June 14, 2024
- Braun
Table of Contents
BRAUN BC08W Digital Travel Alarm Clock User Guide
Battery installation
- Remove the battery door.
- Insert 1x AAA size new battery as indicated in the battery compartment ( 1 ) and press the RESET key ( 5 ) to reset the clock. The display will turn on after a few seconds.
- Close the battery door.
Only use new alkaline batteries from a reputable brand.
Setting the time
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch ( 2 ) to the TIME SETTING position.
- Press the
+’ or-‘ key ( 4 ) to set the desired value. - Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to return the normal display and save the settings.
Setting the alarm
- Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch ( 2 ) to the ALARM SETTING position.
- Press the
+’ or-‘ key ( 4 ) to set the desired value. - Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to return the normal display and save the settings.
Using the alarm function
- Enable the alarm by pushing the ALARM ON / OFF slider ( 3 ) up (so the green indicator is visible).
- To disable the alarm and snooze function, push the ALARM ON / OFF slider down.
Using the snooze function
Tap the SNOOZE touch button ( 6 ) to stop the alarm and activate the snooze function. When the snooze function is activated, the alarm will automatically start again after 5 minutes. The snooze function will not stop unless the ALARM ON / OFF SLIDER is pushed down
For detailed information refer to the full user manual available at www .braun-clocks.com/pages/warranty or scan this code:
https://www.braun-clocks.com/pages/warranty
Braun helpline
Should you have a problem with your product, please check your local service
centre at:
www.braun-clocks.com
www.braun-watches.com
Certain trademarks used under license from the Procter & Gamble Company or its
affiliates.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>