LEEDOAR J15 Wireless Earbuds Bluetooth Headphones User Manual
- June 14, 2024
- LEEDOAR
Table of Contents
LEEDOAR J15 Wireless Earbuds Bluetooth Headphones
Product Information
J15 Ear Phones
The J15 Ear Phones are a wireless Bluetooth headset with multi-touch point controls. They come with a charging case and earphones, a charging cable, a certificate, and ear cap cue cards. The earphones have microphone functionality and display lights for status indication. They also feature a Type-C charging interface and headset charging contacts.
Basic Parameters
- Product name: J15
- Bluetooth version: 5.3+EDR
- Connection distance: 15m
- Charging time: about 1 hour
- Input: 5V-1A
- Talking time: 3-4 hours
- Playing time: 4-5 hours
- Frequency: 2.4GHZ
- Impedance: 32
- Standby time: 7-10 days
- Battery capacity: 30/300mAh
- Charging interface: USB(C), USB(A)
- Power adapter: 5V AC adapter (not included)
Matters Needing Attention
Please ensure that the product is not used or stored in high-temperature or humid environments to avoid affecting its performance. Do not drop or damage the product from high altitudes. If there are any issues with the product, please contact the manufacturer and do not attempt to disassemble it for repair.
Product Usage Instructions
Instructions for Headset Touch Operation
- Left ear touch:
- Single touch: No function
- Long press for 2 seconds: Turn on/off the earphones
- Right ear touch:
- Single touch: No function
- Long press for 2 seconds: Turn on/off the earphones
- Left and right ear touch together:
- Double touch: No function
- Triple touch: No function
- Long press for 2 seconds: Turn on/off the earphones
Connection
- Device connection:
- Open your phone or other device.
- Search for “J15” and click Connect.
- Turn it off:
- Long press the touch area of both earphones for 5 seconds to turn off the earphones.
Charging Instructions
- Unilateral headset charging (Left or Right):
- Place the earphones in the charging compartment and close the lid.
- The display light of the respective earphones will run from low to high (L1 to L4) and turn off when fully charged.
- Charge both left and right ears simultaneously:
- Place both earphones into the charging compartment at the same time and close the lid.
- The indicator lights on both sides of the earphones will run from low to high (L1 to L4) and turn off when fully charged.
- Charging in the charging compartment:
- After opening the lid, the four lights will gradually light up at the same time, indicating the charge compartment battery level. After 10 seconds, the lights will go out.
- When using the data cable to charge the charging compartment, each light will represent 25% of the power (from LED1 to LED4). The lights will turn on fully and then turn off after 10 seconds when the charging cable is unplugged.
Matching and Resetting Method
- Successful pairing:
- The earphones are automatically turned on and paired when thecover is opened. The display will turn off after 10 seconds of displaying the current power.
- To manually pair, touch the earphones 7 times and wait for 3-5 seconds.
- Unsuccessful pairing:
- If the earphones display red and blue lights, it indicates unsuccessful pairing.
- Resetting:
- To reset, touch the earphones 8 times.
- For subsequent uses, open the charging cover to automatically reconnect to the Bluetooth.
Product Function introduction
- Multi-touch point
- Microphone
- Display light
- Headset charging contacts
- Left ear logo
- Right ear logo
- Power indicator light
- Type-C charging interface
Packaging accessories
Instructions for headset touch operation
Earphone connection instructions
Connection
- Device connection: Open your phone or other device, search for “J15”, and click Connect.
- Open the cover to connect the charging compartment. The left and right ears can be connected separately.
Turn it off
- Put the earphones into the charging compartment and close the lid to shut down
- No work for 5 minutes, sleep shutdown
- Long press for about 5 seconds to turn on/ off the ear
Charging instructions
Unilateral headset charging
- After the left earphone is placed in the charging compartment and the cover is closed, the left earphone display light will run from low to high (L1 to L4), and it will turn off when fully charged
- After the right earphone is placed in the charging compartment and the cover is closed, the display light of the right earphone runs from low to high (L1 to L4), and goes out when fully charged
Charge both left and right ears simultaneously
- Put the earphones into the charging compartment at the same time and close the lid, the indicator lights on both sides of the earphones will run from low to high (L1 to L4), and they will turn off when fully charged.
Charging in the charging compartment
- After opening the lid, the four lights will gradually light up at the same time, and then display the charge compartment battery level. After 10 seconds, the lights will go out.
- When the charging compartment uses the data cable to charge, from the left to the right (LED1 to LED4), each light is 25% of the power, and it is fully on. When the charging cable is unplugged, it turns on for 10 seconds and then turns off.
Matching and resetting method
Touch the left and right ear eight reset, put the charging compartment to
remove the headset, touch (L) left ear multi-function touch point 7 wait 3-5
seconds, binaural slow flashing blue light pairing success (please refer to
the index below for specific operations.
- The earphones are automatically turned on and paired when the cover is opened, and the display will turn off after 10 seconds of displaying the current power.
- Touch 7 times and wait for 3-5 seconds to pair successfully, Touch 8 to reset.
- For the second use, open the charging cover and automatically reconnect to the Bluetooth
The basic parameters
Matters needing attention
- Please make sure the product is fully charged before the first use;Or charge it first.
- Please use a brand charger or computer USB to charge the headset (note: 5V-1A charger).
- Stay away from WIFI and routers and other high-frequency transmitting devices, which may affect the signal reception of the unit and cause the phenomenon of sound blocking and disconnection.
- Please use the product in an effective environment (15m) and there should be no physical barriers (such as walls, etc.) between the BT device and the headset.
- When the headset appears unilateral no sound, binaural pairing is unsuccessful and other phenomena, please refer to item 6 (pairing and reset method) to re-pair the headset connection, and reconnect the product to normal use!
Safety warning
- Please ensure that the product is not used or stored in high-temperature or humid environments to avoid affecting the product performance.
- Do not drop or drop the product from high altitude to avoid dam age.
- Please contact the manufacturer if there is any product problem, an d don’t disassemble the product for repair.
Thanks for buying our J15 TWS earphone which comes with wireless stereo, left and right channel separation and HIFI sound functions. And It can be used alone or in pairs. We welcome your suggestions and comments on our products and services!