Blukar K9770 Adjustable Car Phone Mount Cradle User Manual
- June 14, 2024
- Blukar
Table of Contents
Blukar K9770 Adjustable Car Phone Mount Cradle
Welcome
Thank you for purchasing Blukar products. In order to ensure the best
performance and safety, please read this user manual carefully and save it for
future reference. If you need any additional assistance, please contact our
customer support team or send us an email to
support@blukartech.com.
Specifications
- Material: ABS + PC
- Compatible Phone Size: 4.0-6.7 inch
- Applicable Places: Windshield / Dashboard / Car Air Outlet
Structure Picture
Long Arm Base Installation Steps
- Loosen the fixed nut completely, let the ball joint through the fixed nut (The thread must face the groove) and push it to the groove behind the car holder firmly.
- Tighten the fixed nut.
- Use a wet cloth to clean the place (windshield or dashboard) where the car holder needs to be installed, and then wait for it to dry.
- Open the suction cup lock, peel off the protective film from the suction cup.
- Attach the suction cup to the windscreen/dashboard. Press the suction cup firmly and then press the suction cup lock to lock it. (Hint: Suction cup sticks better when left to stand for 24 hours after locking.)
- 6. Adjust the angle of the car holder to align it with the sight line. (Twiddle the length adjustment knob to adjust the length of the arm. Twiddle the angle adjustment knob to change the angle of the arm.)
Air Vent Base Installation Steps
- Loosen the fixed nut completely, let the ball joint through the fixed nut (The thread must face the groove) and push it to the groove behind the car holder firmly.
- Tighten the fixed nut.
- Turn the adjustment knob counterclockwise to adjust the length of the hook clip, find the right position (car vent blade) and insert the car holder, hook onto the car vent blade and turn the adjustment knob clockwise to tighten the hook clip secure it to the car vent blade. (Please do not over rotate to avoid damagina the car vent blade.
- Adjust the angle of the car holder to align it with the sight line.
Using Steps
- Press the release buttons on both sides simultaneously or press the release button on either side, the clip arms will automatically pop open.
- Place the phone and push the clamp arms on both sides to tighten the arms and hold the phone firmly.
- After use, press the release buttons on both sides simultaneously or press the release button on either side again to open the clamp arms and remove the phone.
Suction Cup Use Notes
- When using the suction cup, do not stick it on a curved surface, surface with plush cloth or uneven surface. It would not be securely attached.
- If the suction cup is frequently used in high temperature, low temperature or humid conditions, the suction will not stick as firm. (Please avoid direct exposure to the sun.)
Attention
- Please install the car holder on a suitable place before starting driving navigation, do not operate and adjust the car holder during driving.
- Do not install the car holder on a place which will influence the operation of airbag and driving.
- Keep the car holder away from children.
Product Name: Car Phone Holder
Model: K9770
TEL: 1-800-360-5881
EMAIL: support@blukartech.com
WEBSITE: www.blukartech.com
© Shenzhen Teng Xun Zhan Yi Technology Co., Ltd. All rights reserved.
Manufacturer: Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
Manufacturer Address: Room 302, Building 8, Yunli Intelligent Park, Fada
Road, Bantian Street, Longgang District, Shenzhen, Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>