KINGHE 300W Solar Street Light User Manual
- June 14, 2024
- KINGHE
Table of Contents
KINGHE 300W Solar Street Light
SOLAR STREET LIGHT
Thoroughly reading this user manual while using thedevice is crucial for
ensuring the safety of yourself andothers.
PRODUCT COMPONENTS DIAGRAM
- Lamp Body
- Light Arm
- Washers
- Backplane
- Screw and nut
- Remote Control
INSTALLATION INSTRUCTION
A Pole Mount
B Wall Mount Expansion screws
Tips: It is suggested to mount street lights at a height of 10 to 23 feet for optimal performance.
REMOTE CONTROL BUTTONS
STYLE 1
Note Before first use, please turn on the street lamp switch and charge it
for 6-8 hours under direct sunlight, Install the street lamp in a place with
direct sunlight.
- ON when you press the button ON, the solar street light will be 100% brightness.
- OFF When you press the button OFF, the solar street light will be turned off and cannot be turned on automatically until the next day.
- When you press the button, The maximum brightness of solar lights is 100%, giving you the brightest lighting effect.
- When you press the button, The maximum brightness of the solar lamp is 50%, which can save some power when the weather is bad and keep the lamp working longer.
- 2H+ SEN The solar light has 100% brightness for 2 hours, and then enters motion sensing mode. It turns the brightness up to 100% when motion is detected and turns the brightness back to 30% when no motion is detected.
- 4 H+ SEN The solar light has 100% brightness for 4 hours, and then enters motion sensing mode. It turns the brightness up to 100% when motion is detected and turns the brightness back to 30% when no motion is detected.
- HL+ SEN Motion Sensor Mode: It turns the brightness up to 100% when motion is detected and turns the brightness back to 30% when no motion is detected.
- NO SEN When you press the button NO SEN, the solar street light will be 100% brightness, until the battery power is exhausted. The next day the solar energy fully charged the battery and the brightness was 100% again.
STYLE 2
OFF/ON The button is used to turn the solar light on and off. After the solar light is turned off, it will automatically turn on again the next night.
This button adjusts the brightness of the solar light from 30% to 100%. giving you the brightest lighting effect.
This button adjusts the brightness of the solar light from 100% to 30%. which can save some power when the weather is bad and keep the lamp working longer.
RADAR Motion Sensor Mode: It turns the brightness up to 100% when motion is detected and turns the brightness back to 30% when no motion is detected.
AUTO When you press the button NO SEN, the solar street light will be 100% brightness, until the battery power is exhausted. The next day the solar energy fully charged the battery and the brightness was 100% again.
2H When you press the button 2H: The solar light has 100% brightness for 2 hours, and then enters motion sensing mode. It turns the brightness up to 100% when motion is detected and turns the brightness back to 30% when no motion is detected.
3H When you press the button 3H: The solar light has 100% brightness for 3 hours, and then enters motion sensing mode. It turns the brightness up to 100% when motion is detected and turns the brightness back to 30% when no motion is detected.
4H When you press the button 4H: The solar light has 100% brightness for 4 hours, and then enters motion sensing mode. It turns the brightness up to 100% when motion is detected and turns the brightness back to 30% when no motion is detected.
REMOTE CONTROL INSTRUCTIONS
AFTER SALES SERVICE
If you have any problems with the product, please email us and we will get
back to you within 48 hours.
KINGHE CUSTOMER SERVICE
Email: kinghe_solar@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>