NYLAVEE SK100 Computer Speakers User Manual
- June 14, 2024
- NYLAVEE
Table of Contents
NYLAVEE SK100 Computer Speakers
Package Included
Specification
Device Model
Two Connection Options
| SK100
Bluetooth 5.0 & 3.5mm audio plug
---|---
Power Supply| USB plug (no built-in battery)
Power Input| DC 5V :=, 2A Max
Product Diagram
- Volume Knob
- Bluetooth Indicator
- AUXIN Jack
- Power Indicator
- AUX OUT Jack
Button Control
Function | Operation | Voice Prompt | LED Indicator |
---|
PowerOn
| Insert the USB plug into any USB charging adapter or active computer USB port| ****
Beep
| ****
Power Indicator stays solid blue
PowerOff| Unplug the USB power ccrd| I| I
Bluetooth Mode On/Off| Press the Volume Knob
twice quickly
| ****
Beep
| I
Bluetooth Pairing| I| Beep| Bluetooth Indicator flashes
blue and white alternately
Bluetooth Connected| I| Beep| Bluetooth Indicator (blue)
flashes every 5 seconds
BluetoolhOut of Range| I| I| Bluetooth Indicator flashes
blue and while alternately
Volume+| Turn the Volume Knob clockwise| Beep when
highest volume is reached| I
Volume-| Turn the Volume Knob counter clockwise| I| I
Play/ Pause| Press the Volume Knob once| I| I
Answer/ Hang Up Phone Call| Press the Volume Knob
once| Beep when answering| I
Decline an Incoming Call| Press and hole the Volume Knob
for 1 second
| I| I
Wired connection
The soundbar does not have a built-in battery, please insert the USB plug into the USB port on the desktop, laptop, tablet, power bank, etc.
Wired Connection via 3.5mm Plug
- Wired mode: the sound bar defaults to this mode when it is turned on.
- When the Bluetooth Indicator light is off, it means the wired mode is on.
- Insert the 3.5mm Audio Cable into the “AUX IN” jack at the back of the soundbar and plug the other end into your device.
Note:
- When want to use wired mode, please make sure the soundbar is not in Bluetooth mode.
- Quickly press the volume knob twice to switch from Bluetooth mode to wired mode.
Wireless connection via Bluetooth
Switch to Bluetooth mode
- Press the Volume Knob twice quickly to tum on Bluetooth mode.
- When the Bluetooth Indicator flashes blue/white, it means the Bluetooth pairing mode is on.
Pair with your device
- Tum on the Bluetooth of your device and search for nearby devices.
- Find “SK100” in the search results and tap to connect.
Once connected, a beep will be heard and the Bluetooth indicator (blue) will flash every 5 seconds.
Note:
- Make sure the soundbar isn’t connected to other devices, otherwise please disconnect this device.
- If you cant find other connected devices, please press and hold the knob for 3 seconds to return to the Bluetooth pairing mode (Bluetooth Indicator flashes blue/white).
- Keep the soundbar and your device within 16fl/5m.
Troubleshooting of Sound
If there is no sound comes out from the soundbar, please try the following operations:
- Rotate the volume knob clockwise to raise the volume of the soundbar.
- Adjust the volume on your device.
- Press the volume knob to resume in case the soundbar paused.
- Re-insert the USB plug
Troubleshooting of Bluetooth Connection
- Make sure that the sound bar Bluetooth paring mode is on(Bluetooth Indicator flashes blue/white).
- Make sure the Bluetooth of the soundbar is not connected by other devices.
- Unplug the 3.5mm Audio Cable from your device.
- Delete “SK100” memorized on your device, then search for “SK100” and connect again.
Worry-free Service Guarantee
- 30 days free return and exchange.
- 18 months warranty.
- Lifetime friendly customer service.
Please contact us for more details and further instructions via
[email protected]
Extend 2-years warranty:
www.nylavee.net
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
withstand any interference received, including interference that may cause
undesired operation.