Meudeen HL-103B 3 In 1 Vacuum Cleaner User Guide

June 14, 2024
Meudeen

HL-103
3 IN 1
VACUUM CLEANER

HL-103B 3 In 1 Vacuum Cleaner

AIR DUSTER/VACUUM CLEANER INSTRUCTIONS

Product introduction

Meudeen HL-103B 3 In 1 Vacuum Cleanerr - Product
introduction Q: How can | know which side is for blowing/sucking?
A: Remove all accessories, turn on the switch, you can feel the air flow by hands

Mode 1:
For air duster function, put these on air blowing side Mode 2:
For vacuum cleaner function, put these on air sucking side.
Please make sure putting the filter inside the wide round nozzle while vacuuming dust. Mode 3:
For pumping air out of storage bags, put it on air sucking side

Parts

Meudeen HL-103B 3 In 1 Vacuum Cleanerr - Parts

  1. Main body
  2. Wide nozzle
  3. Blowing nozzle
  4. Flat nozzle
  5. USB line
  6.  HEPA filter *2
  7. Mini brush 1
  8. Mini brush 2.
  9. Vacuum pump
  10. mini nozzle

Instructions of Electric Compressed Air Duster

  1. Ensure that the air duster has electicity.
  2. Open the air duster switch”ON”key,you can start to work.
  3. According to the need to clean the dust on different occasions, the replacement of different suction mouth,the better effect.
  4. Unplug the HEPA filter from dustbin to clean the filter net.
  5. When rechargeable battery is charged, the USB lamp shows red for normal charge and green is full.
  6. The charging time is about three to four hours, full of about 25 minutes of sustainable use.
  7. If the motor appears fast and slow alarm, this is because the battery is not charged in time to charge.
  8. The filter element can be washed with water and needs to be dried before being installed in the vacuum cleaner.

HOW TO ASSEMBLE ALL ACCESSORIES?

Put the blowing nozzle on main body, turn on the switch. Take it to blow everything you want!
Keyboard, computer, laptop, electronics, desktop, car seat and so on. Put the mini brush (little round one) on blowing nozzle, then you can brush item’s surface and clean stuffs thoroughly while blowing now. Put the HEPA filter inside wide nozzle first, then install the wide nozzle on main body. This wide nozzle for sucking up chunk items, suck as crumbs, debris, nuts, coffee beans… (Please make sure you put the filter in wide nozzle before start vacuuming) Put the flat nozzle on wide nozzle for cleaning hard to reach corners, crevices. Like the crevices of keyboard, sofa, car seat… Put the mini brush( short flat ones) on long flat vacuum nozzle. Then you can brush the keyboard keys, computer tower fans or other electronics while vacuuming now! Put the vacuum pump nozzle on main body, then take it to pump air out from storage bags, like to save space for your suitcase when you take it to travel, or pump air out from food compression bags and so on.

Parameters

NAME Voltage Power G.W Dust cupcapacity
Air duster 7. 4V 120W About290g 0. 4L

Disassembly and cleaning

  1. Rotate the dust bin anticlockwise to remove the dust bin from the fuselage.
  2. Take out the filter screen from the dust bin and pour the garbage into the garbage can
  3. If necessary, the dust cup can be cleaned with a slightly wet rag or disposable paper towel, and the filter screen can be washed with water. After washing, it must be completely dried and reused.
  4. To reinstall the dust bin, put the HEPA filter screen into the dust bin, and rotate and tighten it in the opposite direction according to step 1.

Warning

  1. Please observe whether there is sufficient power when using the wireless model;
  2. It is strictly prohibited to use this product at high temperature and high pressure (- 20 C ~+ 50 C)
  3. Do not let children play with this product alone, so as to avoid danger.
  4. When absorbing water, do not inhale too much.
  5. Do not absorb corrosive objects or liquids;
  6. When not in use, please put it in the environment of — 20 °C ~ + 50 ©;

How to Charge

  1. Insert the Type-C cable into the charging port of the air dust,and connect to a 5V/1A USB outlet, such as a USB charger,mobile phoneadapter, laptop, mobile power supply, etc, in order to shorten the charging time, the 5V/1A adapter is the best choice.
  2. When the device is charging, the indicator Type-C light flashes red,and the indicator green light is always on when it is fully charged.
  3. It is recommended that you have the best blower fully charged for better use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals