SMAROCK S10 Pro Smart Mite Cleaner User Manual

SMAROCK S10 Pro Smart Mite Cleaner

Please read this manual carefully before use and keep it safe for future reference.

Dear customer:
Thank you for using the Smart Mite Cleaner. This manual is suitable for the model S10. The content in the manual is for reference in use and maintenance. For matters not covered, please consult our customer service department.

Product Introduction

Packing List

Names of Parts

Instructions for Use

Cleaning method (be sure to read before first use)

• Put the Smart Mite Cleaner on the bed, connect it to the power supply, press the power switch and gently push it back and forth to clean.

Tips:

• There is no need to lift or hold down the Mite Cleaner forcefully; simply put it on the bed and push it back and forth;
• To avoid injury, the UV lamp must be within 3cm of the irradiated object and the inclination angle of the machine should not exceed 30°. Outside of this range, the UV lamp will automatically turn off;
• Normally, some odours are discharged from the air outlet of the Smart Mite Cleaner when it is used for the first time. They will not harm human health and will naturally disappear later;
• The high-speed airflow sound generated by the SmartMite Cleaner is normal.

Cleaning frequency
At first, it is recommended to use the Smart Mite Cleaner 2-3 times a week; later, it is recommended to use it once a week.

Note:

• When the machine is not used for a long time, please place it in a cool and dry place, away from direct sunlight and moisture.
• When it is used for the first time, there will be more garbage; with use, the garbage will reduce accordingly.
• After use, clean the dust barrel assembly.

Maintenance

Dust barrel cleaning

1. Press the dust barrel, release button and remove the dust barrel.
2. Press the lid open button, rotate the lid of the dust barrel, and open the dust barrel.
3. Pick up the lid of the dust barrel.
4. Pull out the cyclone assembly upwards.
5. Clean the dust barrel.
6. Take out the filter sponge.
7. The filter sponge can be washed with water (if washed, it must be completely dried before being used again).
8. Install the filter sponge.
9. After all parts are completely dry, put them back into the dust barrel.
10. Assemble the dust barrel.

Roller brush cleaning
Turn off the machine and unplug the power. Use a coin to turn the bottom plate lock counterclockwise to turn it from the locked state to the unlocked state.

Tips

• It is recommended to clean the dust barrel and filter sponge after each use; if the dust barrel is full in use, it is recommended to clean it immediately, or else it will affect the effect.
• Do not scrub the filter sponge violently when cleaning; after washing the dust barrel assembly, make sure that all the parts are completely dry before putting it into the main unit.
• After the cumulative use time of the filter sponge reaches 30-SOh, it is recommended to replace it to avoid degrading the performance of the machine.

Warning:
Before cleaning the roller brush, be sure to disconnect the power supply to avoid accidental activation of the roller brush, which may cause personal injury.

UV lamp cleaning

Note

• Please wipe the transparent cover of the UV lamp before use to ensure the best sterilization effect;
• Cut off the power when cleaning, repairing or temporarily not using the machine.

Troubleshooting

Before entrusting the maintenance department, please check according to the following points:

If there are other faults and special tools are needed, please go to the designated service outlet for repair and replacement.

Specifications

Technical Parameters

Precautions

Please read this manual carefully, and keep it safe for future reference.

• This product is an electric appliance, do not let it run unattended;
• If you have not used this product for a long time, please turn off the power, and unplug the power plug with dry hands, or else it may cause an electric shock;
• Cut off the power when cleaning, repairing or temporarily not using the machine;
• Do not let the power cord pass through sharp objects and avoid moving the machine by dragging the power cord, so as not to damage the power cord;
• Do not use the machine to absorb hot objects such as carbon, cigarette butts, sharp objects such as broken glass, corrosive liquids, gasoline, alcohol and other flammable and explosive materials, or else it may damage the machine or cause a fire, and result in personal injury and other accidents;
• Do not use this product to absorb water or damp dust, and avoid the machine from being exposed to rain, water, or use in humid places (such as bathrooms, toilets, laundry rooms, etc.) to avoid malfunc­tion;
• Avoid close to heating appliances or exposure to the sun to avoid fire;
• Do not let children play with or operate the machine to avoid accidents;
• Avoid long-term operation with the suction port blocked to avoid damage to the machine;
• Since this product is equipped with a UV lamp, avoid looking at the bottom of the machine when the power is on to prevent UV rays from causing harm to the human body;
• Do not expose plants to UV rays to avoid damage to plants. Do not concentrate the UV rays in one place and use continuously, or else it may cause damage to the object;
• Do not sit on this product to avoid damage to the machine;
• Do not remove the roller brush assembly when the machine is energized or running to avoid damage;
• This product can be used to clean and remove mites from mattresses, blankets, pillows, sofas and other textiles;
• If the power cord is damaged, it must be replaced by qualified personnel from the manufacturer’s mainte­nance department or similar department to avoid danger.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Cleaning and user maintenance shall not be done by children without supervision.

Environment

• Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
• Contact your local government for information regarding the collection systems available.
• If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
• When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposal at least free of charge.

Compliance Statement

• This product complies with the standards of the European Community.
• This product complies with the Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) EU rules restricting the use of hazardous substances in electrical and electronic equipment to protect the environment and public health.
• This product complies with the applicable requirements for products sold within Great Britain.
• This symbol indicates that the product is capable of being recycled.
• This symbol indicates that the product should not be disposed of as household waste. The product must be sent to separate collection facilities for recovery and recycling of electrical and electronic equipment.
• This symbol indicates that the product should be kept away from rain and in dry conditions.
• The warning sign indicates a potential hazard, danger, obstacle, or condition requiring special attention.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>