Popglory P96 Smart Watch User Manual
- June 14, 2024
- Popglory
Table of Contents
Popglory P96 Smart Watch
Product Information
The P96 is a smartwatch that can be connected to your phone to provide various features and functions. It is compatible with both Android and iPhone devices. The watch has a built-in app called GloryFit, which can be downloaded from Google Play or App Store. It also supports QR code scanning for app download.
Key Features
- Step tracking with accurate step size and algorithm updates
- Message notifications
- Brightness adjustment
- Screen-on time duration setting
- Vibration intensity customization
- Time synchronization with phone
- Unit change option
- Female health function
Product Usage Instructions
-
How to connect the watch to your phone:
- Download the app GloryFit from Google Play or App Store, or scan the provided QR code.
- Open the app, go to “Device” > “Add a new device” > select device > tap P96 to complete the pairing.
-
How to get accurate steps:
- Fill in your gender, age, height, and weight information in the app for correct step size and algorithm updates.
- Swing your arms while wearing the watch to record steps. Less than 30 consecutive steps will be considered invalid and not recorded.
-
How to receive messages on the watch:
- If all permissions are allowed during app installation, open the app and go to “Device” > “App Reminder” > open the desired app to receive notifications.
- If permissions were not allowed during installation, uninstall and reinstall the app. Repeat the previous operation steps. Note: Android users need to enable “Background Activity Permission” in the app’s “Me” interface for continuous message prompts. iPhone users need to turn on “Share System Notification of P96” in iPhone’s Bluetooth settings.
-
How to adjust brightness and screen-on time duration:
- Swipe down the home screen of the watch and click the icon at the upper right corner or go to the Settings icon to adjust brightness.
- Swipe down or up on the main interface, find and click the Settings icon, then click “Screen time” and select the desired screen-on time.
-
How to set vibration intensity:
Swipe down or up on the home screen of the watch, click the Settings icon, go to “Vibration” and swipe up or down to select ‘High’, ‘Medium’, or ‘Low’ intensity. -
How to change unit:
Under connection, click “Profile” > “Unit” to change the desired unit. -
How to set the female health function:
After connecting the watch to the GloryFit app, click “Profile” > “Physiological Cycle” > click “Setting” at the upper right corner to set start time, duration, and cycle for the female health function.
FAQs
- How to connect the watch to your phone？
- Download the app GloryFit from Google Play or App Store, or you can scan the QR code below to download the app.
2. Open the app GloryFit→Device→Add a new device→select device→Tap P96 to complete the pairing.-
How to get accurate steps?
-
Fill in your gender, age, height and weight information in the app so that the watch can update the more correct step size and update the algorithm.
-
When you swing your arms, the watch will record your steps. If you walk less than 30 steps in a row, it will be considered as invalid step and won’t be recorded.
-
How to get accurate measurement of blood oxygen, blood pressure, and heart rate?
-
Please make sure you wear the watch well on your wrist. Put your arm flat, relax and keep still while making sure the watch is close to your skin. Note: Even when worn correctly, individual differences such as skin color, hair, tattoos, and scars may affect the measurements.
NOTE:
Wearing the watch too tightly, raising your hand and making a fist will affect blood circulation and may affect the heart rate signal. -
This watch is not intended for medical use, all measurements are for general fitness purposes.
-
-
How to receive the messages on the watch?
-
If you have allowed all permissions when installing the app, please open the app GloryFit→Device→App Reminder→open the app you want to receive notifications. Then you will receive a message prompt.
-
If you have not allowed all usage permissions when installing the app, please uninstall and reinstall the app. Then repeat the previous operation steps.
NOTE:
* Android phone users need to open the ‘Me’ interface in the app, click ‘Permission Settings→Background Activity Permission firstly. Then allow the app to run in the background to ensure continuous receipt of message prompts.
* The iPhone users need to turn on Share System Notification of P96 in iPhone’s Bluetooth.
- How to adjust the brightness and set the duration of the screen-on time?
- Swipe down the home screen of the watch and click the icon at the upper right corner or click the Settings icon to adjust the brightness.
- Swipe down or up on the main interface, find and click Settings icon →Screen time→ swipe up and down to select the screen on time you want.
-
How to set the vibration intensity?
Swipe down or up the home screen of the watch → click the Settings icon → Vibration → Swipe up and down to select ‘High’, ‘Medium’ or ‘Low’ in the menu. -
How to set the weather temperature unit?
After the watch is connected to the GloryFit app, click the weather icon at the upper left corner on the home page → click ‘℃/℉’ at the upper right corner to switch the temperature unit. -
How to switch the watch language?
After the watch is connected to the GloryFit app, click Device → More settings→ Device Language, and select the language you want. -
How to set watch time and time format?
- Set the watch time: Please connect the watch with your phone firstly. Then the watch time will be synchronized with the phone time. If the time is still wrong, please unbind the watch and reconnect it.
- Set the time format: After the watch is connected to the GloryFit App, click Device → More settings → and select 12 or 24 hours.
-
How to change unit?
Under connection, click Profile → Unit → you can change the unit you want. -
How to set the female health function?
After the watch is connected to the GloryFit app, click Profile → Physiological Cycle→ click Setting at the upper right corner to set the start time, duration and cycle.