NaPro NV3U HD Conference Camera User Manual

HD Conference Camera
User Manual

Version V1 .0

Product Description

1.1 Front

1. Lens
2. Pan & Tilt
3. Standby
4. Power

1.2 Back

Packing List

2.1 USB Interface Packing List

2.2 USB+WIFI Interface Packing List

Performance Characteristics

Cable, lCeiling bracket & screws.
Model No.| NV3W| NV1OW| NV2OW
---|---|---|---
Sensor| 1/2.8″SONY CMOS
Effective Pixels| 2.38 mega pixel
Video Signals| 1080p@60/50/30/25fps, 720p@60/50/30/25fps
Zoom| 3X optical zoom| 10X optical zoom| 20X optical zoom
Lens| f=2.38-7mm| f=5.76-46.09mm| f=5.9-94.4mm
Aperture| F1.96-3.64| F1.8-2.6| F1.8-3.9
Horizontal Angle| 103.69(W)-42.121T)| 54.7°(W)-6.8°(T)| 52.1°(W)-3.4°(T)
Vertical Angle| 67.14°(W)-24.87°(T)| 30.8°(W)-3.8°(T)| 29.3°(VV)-1.9°(T)
Diagonal Angle| 113.911W)-47.551T)| 62.8°(W)-7.8°(T)| 59.8°(W)-3.9°(T)
Video Output| USB 3.0, 5.8G Wifi
Video Encoding Format| H.264, H.265, MPG, YUY2
Video Resolution| 1080P (1920 1080) etc
Signal Standard| NTSC/PAL
Preset Position| User can set up to 255 presets (10 presets by IR remote)
Control Interface| RS-232 (input only), RS-485
Wifi| Frequency band: SG /Distance: 10 meters
Shutter| 1/30s-1/10000s, auto
Baud Rate| 2400/4800/9600/38400bps
Control Protocol| VISCA, PELCO-D, PELCO-P(RS-232, RS-485)
USB Protocol| UVC1.1
Minimal Illumination| 0.1Lux
SNR| z5OdB
Horizontal Rotation| 350° (±1751 0.11s-1007s
Vertical Rotation| 180° (±9010.17s-80%
Power Supply| DC 12V/2A
Power Consumption| 12W
Work Temperature| 0°-450°
Work Humidity| 0-95% RH
Product Size| 181-184.174mm/285217197mm(before / after packing)
Product Weight| 1.5kg/2.0kg (net / gross weight)
Accessories| PDC 12V Power adaptor, 1IR remote control, lManua I, lUSB3.0 Cable, 2 5.8G Wifi antennas, 15.8G Wireless Dongle, l*Ceiling hrarket F4 strews.

Remote Control Button Description

preset position
Reset the preset position
6| UP| The camera rotates horizontally in regular installed direction
7| DOWN| The camera rotates horizontally in reversed installed direction
8| PTZ Control Key| PTZ moves according to the arrow indicates. Press [ ] PTZ will back to the default position
9| Return/Exit| Return to up level menu or exit menu
10| MENU| Enter or exit OSD Menu after pressing it
11| | PTZ rotates speed-
12| | PTZ rotates speed
13| | PTZ rotates speed+
14| ZOOM Slow Key| Zoom in + or out – slowly
15| ZOOM Fast Key| Zoom in + or out – quickly
16| UR Set| Support, press this key for 10 seconds
17| Focus Key| Auto/Manual/Far/Near Focus Default: Auto Focus
18| Bright Adjustment| Adjust the brightness of the image
19| | Reserved
20| Mirror| Enable the picture left/right flip
21| Image Mode| Switch between three image modes Normal, PC, Bright

• Attentions for Remote Control

  1. Please check whether the indicator corresponding to the camera selection area is on or not.
  2. If the remote control doesn’t work, please replace batteries.
  3. Make sure the Number keys on the camera selection area are consistent with the remote control address in the menu.

Camera Menu Setup

When operating remote control, press [ MENU l to enter main menu of the video camera.
5.1 Level 1 Menu – Main Menu

Language: Support Chinese/English
Press the Home button on the Remote to enter level 2 sub-menu
Press the Menu button on the Remote to exit menu

5.2 Level 2 Menu – Exposure

Mode: Auto/Manual
Backlight: On/Off the backlight
ExpComp: Exposure compensation, optional item is -50-+50
Flicker: Support Off/50Hz/60Hz
When changing the exposure mode to Manual, the sub-menu is as shown below:

Iris: F No. setting, the value should be F1 .6/F2.0/F2.4/F2.8/F3.4/F4.0/F4.8/F5.6/F6.8/F8.0/F9.6
Shutter: Shutter value setting, the value is between 1/10000 and 1/25
Gain: Exposure Gain setting, optional item is Oto 99
Flicker: Off/50Hz/60Hz
5.3 Level 2 Menu – Color

Brightness: Set image brightness dynamically. Default 50, optional item 0-99
Contrast: Set image contrast dynamically. Default 50, optional item 0-99
Hue: Set the relateive brightness of the image. Default 50, optional item 0-99
Saturation: Set image color effect. Default 50, optional item 0-99
Sharpness: Set sharpness level. Default 50, optional item 0-99
WB mode: Auto/ManualNAR
When the WB mode is Auto, the Rtuning and Btuning value can be tuning. The range is 0 to 99
When the WB mode is Manual, the sub menu will be as shown below:

In manual WB mode, the above values can be adjusted. The Rgain and Bgain value can be tuning. The range is Oto 99
When the WB mode is VAR, the sub menu will be as shown below:

The range for the Color Temp can be adjusted between 2500K to 9000K.
5.4 Level 2 Menu – Image

Flip: Enable/disable the picture up/down flip
Mirror: Enable/disable the picture left/right flip
Video Format: 1080P-60/50/30/25,720P-60/50/30/25
USS Mode: ISOC/BULK
Adjust between Isochronous transfers mode and Bulk transfers mode
Style Mode: Normal/PC/Bright

5.5 Level 2 Menu – P/T/Z

Ace Curve: Adjust the speed of pan, tilt and zoom to Fast/Middle/Slow.
5.6 Level 2 Menu – Communication

Protocol: Default Auto, option item Visca/PELCO-D/PELCO-P/Auto
Address: Set the camera’s address, option item 1-7 in Visca, 1-255 in PELCO-D, 1-32 in PELCO-P
Baudrate: Default 9600, option item 2400/4800/9600/38400
RC Address: Set the IR remote control’s address to control the corresponding camera, option item ALL/1 /2/3/4
5.7 Level 2 Menu – Information

Model: HD Camera
Version: 1.1 .1.1
Date: 2022-11-04
Notice: The version number here is just an example. The actual parameters shall prevail.
5.8 Level 2 Menu – Restore Default

Restore: No/Yes

Common Operation Instructions

6.1 Camera Select
Set the IR remote control’s address to control the corresponding camera, option item 1/2/3/4

6.2 Camera Direction Control

Note: Press the direction key when you need to adjust the angle. If you want to move the camera slowly, just click the direction key; If you want to move the camera fast at a large scale, just long-press the button.

6.3 Camera Focu Mode Control
[AUTO] Switch the focus mode to AUTO
[ MANUAL] Switch the focus mode to MANUAL
[FAR] Far focus manually
[ NEAR] Near focus manually

6.4 Camera Zoom Control
Press any one of the 4 [ZOOM] to make the zoom functioning. These 4 keys are not applicable for fixed focus cameras.

6.5 Preset Setup, Call, Cancel

1. Reserve Preset: Press [PRESET], then press one of the numbers (0- 9) to reserve a preset that corresponds to the NUMBER.
   Note: You can setup 10 presets at most by the remote control.

2. Call Preset: Press the NUMBER (0-9) directly to call the reserved preset.
   Note: It won’t work if there’s no preset reserved in the corresponding number.

3. Remove Preset: Press [ RESET l, then press one of the number (0- 9) to remove a preset that corresponds to the NUMBER.

6.6 RS-232 Interface Distribution

6. 7 RS-485 Interface Distribution

Installation Instructions

7.1 Surface Installation
Put the camera on the desk flatly, and make sure the camera is in a horizontal position. If you want to put the camera on an oblique surface, please make sure the angle of inclination is less than 15 degrees to ensure the camera’s pan & tilt  works normally.

7.2 Wall Mount Installation

Trouble Shooting

Before requesting service to service engineer, please refer to the following methods to remove failures. If the failures still can’t be solved, please contact us for assistance.
Q: The video of the camera cannot be displayed on the screen.
A: Please check the connection between power cable, video cable, camera and monitor, fix the connector on each end.
Q: It’s unable to Pan, Tilt and Zoom camera.
A: Because the menu was displayed on monitor. Please re-operate after exiting the menu.
Q: Why the camera rotates for about 10 seconds after power on?
A: This is the normal self-test of the camera.
Q: Poor Image quality while using in church or other low-light conditions.
A: Press menu (ON/OFF) to adjust backlight effect to suit the church lighting properly.
Q: Remote control is not working or insensitive.
A: CDNot work, please replace batteries.
2Not sensitive: Choose the correct “IR select” number to corrspond to the camera. Control the camera within 10m (32.8ft). Remove the obstacles. Aim at the sensor which is in front of the camera when controlling it.
Q: USB interface is not identifiable.
A: Please check if the USB cable and extension cable are well connected or not. If yes, change to another USB interface and try to connect again.
Q: It won’t be controlled via RS-232/RS-485 when camera connect to PC.
A: Make sure it is a correct connection between the camera and PC.
(Refer to RS-485 and RS-232 Pins distribution on page 12).
Q: Why no ceiling mount bracket?
A: Camera comes with wall mount only. ceiling mount or tripod brackets need to buy separately.
Q: Does this camera has built-in mic?
A: No, this camera comes with no built-in mic.
Q: Can we control the camera only by the remote control?
A: You can control the camera by remote control, keyboard controller (joystick), and software.

Maintenance Services

All products purchased from our company are guaranteed to keep in good repair for 36 months. If there are any quality problems during the guarantee period, we will maintain them for free.
Under any of the following warranties, related maintenance costs will be collected:

1. Product was not normally used.
2. Fire, electric shock, outside object collapse or other natural disasters causing the equipment damaged.
3. Unauthorized repair, misuse, abuse or change.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>