creoh 3 In 1 Foldable Magnetic Wireless Charger User Manual

creoh 3 In 1 Foldable Magnetic Wireless Charger

PRODUCT INTRODUCTION

Simple, elegant, golden ratio outline, foldable and portable, wide compatibility with devices, creative iWatch charging drawer, multi-angle adjustable metal bar for view, magnetically charging new iPhone series, charge 3 devices wirelessly and simultaneously With only 1 cable… this is 3 in 1 foldable magnetic Wireless charger that newly designed for your fashion and cool way of charging. The phone charging pad can magnetically hold the phone vertically and horizontally in order to have a great view, so this part is mainly for iPhone 12 series and above( if supports MagSafe charging). And for other Qi-enabled phones like the iPhone 8 and Galaxy S21, it supports flat charging only. For iWatch charging pad, it’s only for Apple Watch S2 to S6 and SE while the earbuds charging area is not only for AirPods 2 and ArPods Pro but also for popular Android TWS earbuds like Galaxy Buds. You can enjoy your charging experience safely and effectively With the protection of over-voltage ,over-current,over-temperature, and FOD functions.

HOW TO CHARGE

1. Plug in the Type-C cable to power on the wireless charger, the white light will be on.
2. Put your phone on the phone charging pad, it will be automatically charged and the blue light will breathe. If it is magnetically attached to the pad, you can adjust the height and angle of view by folding and stretching the adjustable metal bar if you want
3. To charge your iWatch, pull out the iWatch charging drawer below the right of the whole charger first, then put your iWatch to charge on the iWatch charging pad, you can turn up the pad to charge horizontally, especially for single round watch strap.
4. Place your earbuds case in the center of the earbuds charging area to make sure the charging light of the earbuds case is on, then charging is getting started.

LED LIGHT INSTRUCTIONS

CHARGING SCHEMATIC DIAGRAM

APPLICABLE DEVICES

1. Smart Phone:
2. Apple: iPhone 13, 13 Pro, 13 ProMax, 13 Mini, iPhone 12, 12 Pro, 12 ProMax, 12 Mini,iPhone SE 2022&2020, iPhone 11, 11 Pro, 11 Pro Max. iPhone xs, Xs Vlax, XR. iPhone X, 8, 8 Plus.
3. samsung: Galaxy Z Flip, Flip 3. Galaxy S: S22, S22+, S22 Ultra. S21, S21 +, S21 Ultra, S20, S20+, S20 Ultra, S20FE. SID, SIO+, Sloe. sg, S9+. S8, S8+. S7,S7 edge. S6, se edge, S6 edge+, S6 G9209, S6 Active.Galaxy Note: Note20, NotelO, NotelOe, NotelO+. Note9, Note8, Note7, Note6, Notes.
4. Huawei: P30 Pro, P40 Pro, P40 Pro+. Mate: 40E, 40 RS, 40 Pro+, 40 Pro, 40, 30E Pro, 30 5G, 30 Pr05G, 30, 30Pro, 30 RS, 20Pro, 20RS, RS.
5. Xiaomi: Mi12, 12 Pro. Mill, 11 Pro, 11 Ultra. Milo, 10 Pro, 10 Ultra. Mi9, 9Pro.Mix4, Mix 3, Mix 2s.lncluding other devices with Wireless charging receiver built-in.(Note: A1 devices must meet the Qi standard).
6. Smart Watch: Only compatible wth Apple: Watch S2/S3/S4/S5/S6/SE/S7.
7. Earbuds: Samsung: Galaxy Buds/ Buds+/ Buds Pro/ Buds Live/ Buds2. Apple: ArPods 2/ ArPods 3/ ArPods Pro. Huawei Freebuds2&3. And more TWS(others Qi enable earbuds)

PRODUCT SPECIFICATION

• Input: 9V/2A ,9V/2.7A or 12V/2A
• Input socket: Type-C
• Conversion Rate(Phone): 2730/0
• Product Size: 1
• Phone Output: 15W/lOW/7.5W/5W
• Watch Output: 2.5W
• Earbuds Output: 3.0W

PACKING LIST

• Wireless Charger I, Type-C quick charge cable I, User manual* I

FAQ

If you’re experiencing interrupted or slow charging, check the following:

1. The back of your phone should not have any metal, pop sockets, or credit cards.
2. Put the phone in the center of the charging surface (this lets the charging coil in your phone line up with the one inside the wireless charger).
3. The wireless charging coil on Sony phones is located slightly below the center.
4. Phone cases should be no thicker than 5 mm for effective charging.
5. Check whether the adapter is a QC3.0 fast charger.

If you’re failing to charge your device, please try out the following:

1. Please restart your cell phone and test with another USB cable.
2. Please check whether the indicator turns on or not.
3. The wireless charging coil on Sony phones is located slightly below the center.
4. Phone cases should be no thicker than 5 mm for effective charging.
5. Check whether the adapter is a QC3.0 fast charger.

If you’re using the recommended wireless charger with the QC3.0 Adapter and have removed any potential charging obstructions, but are still experiencing issues, try this:

1. Replacing the cable connecting your wireless charger.
2. Rebooting your phone.
3. Unplug the adapter and reinsert it.

Charging is still slow.

• The mobile phone itself or the external receiving coil allows the Wireless charging current to be different, or the application running consumes a lot of power v, when the mobile phone is charging. It is recommended to reduce or close the application.

The phone is charging intermittently, or the indicator light flashes.

• If the charging current is not enough, please use an adapter with sufficient power 9V/2A or 18W above.

Charging fever.

• It is normal for the receiving coil or transmitter board to generate heat during wireless charging. If the wireless charger is too hot, please take your phone off it, 1Mnen the wireless charger is cooled down, please charge it again.

The charger does not work Do not put metal debris or magnetic cards in the charging area.

• If the product does not work due to overheating. please take off the phone and charge it again when it is cooled down.

If there are other problems, please contact our after-sales for a solution

WARNING

• Avoid using the product at places that are wet, humid, or have high temperatures.
• Avoid dropping the product from high places.
• Do not disassemble the product by yourselves. Please contact us if necessary.
• Do not clean the product unless the unit is powered off.
• It is recommended to use an 18W or above adapter to charge 3 smart devices at the same time.

All products brands and trademarks are the property of their respective owners

FCC STATEMENT

This device complies with part 15FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note : this equipment has been tested and found to comply with the limits for a Class B diaital device_pursuant to part 15 of the FCC ulesThese limits are desianed to providereasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. and, if not installed and used in accordance with the instructions cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu lar insta llation.lf this equipment. does cause harmful interference to radio or television reception which can be determined by turning the equipment off and the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device, a distance of 15c surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>