ALLTURN C1K Upgraded Plastic Welder Instructions
- June 14, 2024
- ALLTURN
Table of Contents
- TECHNICAL PARAMETERS
- SAFETY GUIDELINES
- SUPPLEMENTARY INSTRUCTIONS FOR SAFE OPERATION
- SAFETY GUARD FOR PLASTIC WELDING GUNS
- PLASTIC WELDING GUN FUNCTION
- SELECTION OF WELDING NAILS FOR PLASTIC WELDING
- MAIN USE OF PLASTIC WELDING GUNS
- SAFETY ALERT
- INSTRUCTIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Plastic welding gun instructions
TECHNICAL PARAMETERS
| Input voltage | Input Current | Output Power | Output voltage | Output current |
|---|---|---|---|---|
| EU 220W) | 0.5(A) | 0-100(W) | 0-5(V) | 0-65(A) |
| US 110(V) | 0.5(A) | 0-100(W) | 0-5(V) | 0-65(A) |
SAFETY GUIDELINES
Attention
Please read this manual thoroughly before using this tool and follow the basic
safety guidelines to reduce the risk of fire, electric shock and personal
injury. Please save the instructions for future reference.
- Kep the workplace clean and tidy, the messy workplace is prone to danger.
- Please check the working environment before work. Do not use it in places with water or humidity. Do not use it near flammable liquids or gases.
- When moving the tool, please do not pull the power cord, and do not make the power cord contact with heat source or oil.
- Use suitable extension cords when working outdoors.
- In order to avoid electric shock, the body should not be close to the grounded objects, such as: pipelines. heating furnaces and refrigerators.
- Avoid getting children and other people close to the workplace and contact tools. When the tool is not in use, the power cord should be removed from the power outlet and placed in a high place to avoid contact with children.
- Please use iron hoop or vise to fix the workpiece, do not hold it by hand.
- Pay attention to the state of use, stay alert and avoid using tools when tired.
- Do not be too hasty when working, always maintain a balanced operation.
- Carefully maintain the tool to maintain good performance. Please follow the instructions to add lubricant and replace original parts. Be careful to keep the power cord intact. If it is damaged, please replace it immediately. Keep the grip dry and clean and away from oil.
- Check if the tool is damaged before using the tool, and if the spare parts are loose or missing.
- Please connect the power supply when the tool switch is off. When using or replacing parts, you must cut off the power and pull the power cord out of the power socket.
- The use of unqualified accessories may lead to danger, please replace the original specifications of the parts.
- Please use within the scope of tool design, and do not overuse the tool to ensure its normal work efficiency andsafety.
- For long hours of work, use protective equipment such as eye masks and earmuffs.
- This product comes with overheat protection function, will stop working after overheating, and then continue to work after cooling.
SUPPLEMENTARY INSTRUCTIONS FOR SAFE OPERATION
- Please select the power supply according to the voltage used on the tool.
- Always hold the tool at all times when using the tool at a height.
- Do not place the tool until the tool has cooled completely.
WEAR GOGGLES WHEN USING THE TOOL
SAFETY GUARD FOR PLASTIC WELDING GUNS
- Do not directly put the plastic welding gun wire against people and animals.
- Do not use it near flammable or flammable gases.
- When the plastic welding gun is in use or just after use, do not touch the welding wire. The plastic welding torch handle must be kept dry.
- The plastic welding gun should be completely cooled before it can be stored.
PLASTIC WELDING GUN FUNCTION
Function 1: Plastic welding (free of nails) filler welding, hole repair, and
eliminate gaps.
Function 2: Planting nails With various repair nails, it can repair
horizontal, vertical, long and short cracks.
Function 3: Hot smoothing Plastic heating is smoothed, welded, doubled in
strength, and beautifully added.
Function 4: Thermal cutting It can be used for hot cutting of plastic rope,
flat cutting and automatic sealing.
Function 5: Tin Welding Heat/cooling is faster. more efficient and more energy
efficient than general welding machines.
SELECTION OF WELDING NAILS FOR PLASTIC WELDING
Fracture plastic welding nail type selection
MAIN USE OF PLASTIC WELDING GUNS
SAFETY ALERT
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involvedChildren shall not play with the applianceCleaning and user maintenance shall not be made by children without supervisionlf the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
INSTRUCTIONS
- After installing the welding pin, electrify and heat for 5 seconds, insert the heating welding nail into the plastic product to be repaired, release the switch, cool for 45 seconds, and wrap the welding pin with the repair plastic, and then remove the welding gun
- After installing the welding knife, electrify and heat for 15 seconds to heat and smooth the plastic products to be repaired. After the heating and leveling is completed, cool it for 45 seconds, and then carry out other plastic repair work.
- The welding knife is suitable for high-power DH-B100 plastic welding gun, but not for low-power DHSO plastic welding gun.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>