Power Locus P2 Bluetooth Foldable Earphones User Manual

Power Locus P2 Bluetooth Foldable Earphones

PowerLocus P2 User Manual

Product Information

Product Indication| Bluetooth Version| Impedance| Working Distance Range| Frequency Range| Weight| Audio Drivers| Charging Voltage| Charging Time| Talking/Music Time
---|---|---|---|---|---|---|---|---|---
1. Power on/off
2. Play/pause, answer/end calls, reject call, last number
redial
3. Volume up (Short Press), Next song (Long Press)
4. Volume down (Short Press), Last song ( Long Press)
5. Multi-function button (pairing, auto search radio)
6. Headset jack
7. LED indicator
8. USB-C charging port
9. Microphone
10. Micro SD/TF card slot| V5.3| 32 Ohms| 10M| 20Hz-20kHz| 175g/0.39LBs| 40mm| DC 5V| About 1.5 Hours| About 20 Hours (50% Volume)

Product Usage Instructions

1. Power on/off the headset: Press and hold the power button for about 2-3 seconds until the indicator light turns on/off.
2. Pair to your mobile phone or other products: Put the headset in pairing mode and connect it to your phone or other devices.
3. MP3/FM mode: Automatically connected to your phone or other products in this mode.
4. Answer/end calls, reject call, last number redial (In the Bluetooth mode): Press the multi-function button to answer a call. Press the button again to hang up. If the other side hangs up, there is no need to press the button. If you press the button about 2-3 seconds, it will reject the call. Press the button 2 times while the Bluetooth headphones are playing music to pause the music and enter the waiting state. After hanging up, the music will continue to play automatically.
5. Charging the headset: Connect the USB-C charging port to a DC 5V power source and charge for about 1.5 hours.
6. Wired headphone function: For any mode of headphone, you can connect one side of a 3.5 stereo sound supply extension line to the headphone audio jack and the other side to an audio jack (such as a mobile phone, computer, iPad, etc.) to listen to songs from other devices.
7. How to reset the headphones: Hold both buttons for 4-7 seconds to reset the Bluetooth and enter the pairing mode again.

Warnings:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause unwanted operation.

To ensure proper operation and compliance, please follow these guidelines:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

The device has been evaluated to meet general RF exposure requirements.

ISED Canada Statement:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause interference.
• This device must accept any interference, including interference that may cause unwanted operation of the device.

Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment to  maintain compliance with IC’s RF Exposure guidelines. Thisequipment should be installed and operated with a minimum distance of 0mm from your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

For Warranty or Problems with the product, please contact us!
Email Support: info@powerlocus.com

PRODUCT INDICATION

1. Power on /off

2. play/pause, answer/end calls, reject call,last number redial

3. Volume up (Short Press)
   Next song (Long Press)

4. Volume down (Short Press)
   Last song (Long Press)

5. Multi-function button(pairing,auto search radio)

6. Headset jack

7. LED indicator

8. USB-C charging port

9. Microphone

10. Micro SD/TF card slot

• Bluetooth Version: V5.3
• Working Distance Range: 10M
• Frequency Range: 20Hz-20kHz
• Audio Drivers: 40mm
• Charging Voltage: DC 5V
• Charging Time: About 1.5 Hours
• Talking/Music Time: About 20 Hours (50% Volume)
• Impedance:
• 32 Ohms
• Weight:
• 175g/0.39LBs

POWER ON/OFF THE HEADSET

• POWER ON: Slide the switch right and the blue and red indicator light will flash(the headset said: the wireless is ready to pair ).
• POWER OFF: Slide the switch left and blue indicator light will go off.

PAIR TO YOUR MOBILE PHONE OR OTHER PRODUCTS

• Slide the switch right and the blue and red indicator light will flash(the headset said:the wireless is ready to pair ).
• Turn on the bluetooth function of your phone or other products.
• Search for the bluetooth devices and select”PowerLocus P2 “.(Enter the code ‘0000’ if needed)
• If paring is successful, the blue light indicator starts flashing(the headset said:the wireless is connected successfully).
• Please make sure the headphone is working before pairing.
• It will connect to the pre-set phone automati- cally when turns on(Please make sure the bluetooth function of your phone is working)
• If the pairing is not successful, please switch off headset firstly, and then re-pair again.

MP3/FM

• In power-on mode, insert the TF card,short press M button, MP3 will play automatically.
• If have not TF card, short press M button, FM radio will play automatically.
• (1) In power-on mode, short press M button, FM radio will play automatically. (2) Long press the Play/Pause button to auto search all radio station, (3) wait for 40sec to 1min for the stations to be memorized, (4) then long press or, you will listen to any radio station you like..
• If you are listening to FM radio,short press M button,it will be converted to the bluetooth mode.And auto connected to your phone or other products.

ANSWER/END CALLS, REJECT CALL, LAST NUMBER REDIAL

(In the bluetooth mode)

• When there is a call,short press button can answer the call. After the call,press button can hang up. If the other side hang up, no need to press the button.
• reject call: long press button about 2-3sec.
• last number redial: press fast button 2 times
• When the phone call out or answer the call, if the bluetooth headphone are playing the music, the music will pause automatically and enter the waitino state After hano up the music will continue to play automatically.

CHARGING THE HEADSET

• Insert USB charging cable into USB port which have support 5V power (such as ACIDC USB adapter or PC USB port). When the red light is on, the headset is in charging. When the red light will be off, the headset is fully charged. It takes about 2-2.5 hours to charge the headset fully.
• The battery is rechargeable.Low-Voltage alert:When the alert tone ‘low battery’ sounds and the indicator turns into red indicate that the battery has run out, need to be charged as soon as possible. First time charging : please be sure the battery has been charged fully before use.

WIRED HEADPHONE FUNCTION

For any mode of headphone, you can connect one side of 3.5 stereo sound supply extension line to headphone audio jack, the another side connect to Audio jack(such as mobile phone, computer, pad etc). Then you will hear songs from other devices.

HOW TO RESET THE HEADPHONES?

Hold both Buttons for 4-7 seconds in order to reset the bluetooth and enter pairing regime again.

Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirement.

ISED Canada Statement:

This device contains licence-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada ‘s licence exempt RSS(s). Operation is subject to the following two conditions:
this device may not cause interference and this device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure: This equipment complies with  Canada radiation
Exposure limits set forth for an uncontrolled environment to maintain compliance with IC’s RF Exposure guidelines. This equipment should be installed and operated with minimum distance of Omm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

CE

Hereby GL Grup-2015 LTD declares that wireless headphone PowerLocus P2 is in compliance with essential requirements and other relevant conditions of Directive 2014/53/EU. The full text of the EU declaration conformity is available at the following internet address: (powerlocus.com/doc)
Frequency: 2402-2480 MHz
Max radio frequency power: 100 mW (EIRP) GL GRUP-2015 LTD.
36 VASIL LEVSKI STREET, 5370 DRYANOVO,BULGARIA

UK
To find out more about the UK Declaration of Conformity, please visit: https://powerlocus.com/doc-uk-p2
This symbol on a product means that the product is covered by European Directive 2012/19/EU.
Electrical products should not be disposed of with household waste. Please recycle them at the collect points provided for this purpose.
Contact the local authorities or your dealer for recycling advice. Proper disposal of old appliances helps preserve the environment and health

References

• PowerLocus Doc - PowerLocus

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>