Blukar K9119 Head Lamp User Guide

: June 14, 2024
: Blukar

Table of Contents

Blukar K9119 Head Lamp
Package Contents
Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Blukar K9119 Head Lamp

Welcome
Thank you for purchasing this Blukar product. To ensure optimum performance and safety, please read this user manual carefully and keep it for future reference. If you need any additional assistance, please contact our customer support team or email us at support@blukartech.com.

Package Contents

1 x LED Headlamp
1 x Headband
1 x USB C Charging Cable
1 x User Manual

Specification

$Blukar-K9119-Head-Lamp- $1$$

Structure Diagram

$Blukar-K9119-Head-Lamp- $2$$ On /Off Mode

Press the switch button to turn the light on/off and adjust the light mode.
In this mode, when any light mode is turned on, the switch button indicator and the battery indicator light up in blue at the same time.

$Blukar-K9119-Head-Lamp- $3$$ Sensor Mode

Long press the switch button 1 time, the indicator light (red/blue) is on, and it enters the sensor mode (Middle Light, Strong White Light).
Press the switch 2 times to switch the light (Middle Light, Weak White Light).
Press the switch 3 times to switch the light (Side Light, Red Light).
Press the switch 4 times to turn off the sensor mode and the light.

Note: Waving your hand within 15 CM in front of the headlamp to turn on / off the light in sensor mode.

Charging

Charging : the blue light is flashing; Fully Charged: four blue lights are always on.
Please make sure the product is fully charged when you use it for the first time.
When the headlamp is in low power mode, the indicator light flashes blue.
Please use the supplied or certified USB C cable to charge. When fully charged, please close the dust cover to protect the charging port.

Precautions

Do not use the product while charging.
It is not recommended to leave the product in an uncharged state. If not used for a long period of time, charge the headlamp at least once every 2 months.
Do not overload the circuit while charging, as this may cause electric shock or fire.
Do not use this product in extremely hot or cold environments.
Keep it away from water, fire, flammable gas and corrosive liquid.

Warning

Do not look directly into the light source to avoid eye irritation.
Do not disassemble and replace the internal parts of the lamp by yourself to avoid damaging the products.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Children should use this product under the supervision and guidance of adults.

Blukar

TEL : 1-800-360-5881
EMAIL : support@blukartech.com
WEBSITE : www.blukartech.com

Product Name : LED Headlamp
Model : K9119
Manufacturer: Shenzhen Teng Xun Zhan Yi
Technology Co., Ltd.
Manufacturer Address: Room 302, Building 8, Yunli Intelligent Park, Fada Road, Bantian Street, Longgang
District, Shenzhen, Guangdong, China