Blukar K9754 Car Cell Phone Holder User Guide
- June 14, 2024
- Blukar
Table of Contents
User Guide
www.blukartech.com
Welcome
Thank you for purchasing Blukar products. In order to ensure the best performance and safety, please read this user manual carefully and save it for future reference. If you need any additional assistance, please contact our customer support team or send us an email to supoomi@tlukartech.com.
Specification
Product Name: Air Vent Car Phone Holder
Material: ABS+PC
Compatible Phone Size: 4.0-6.7 inch (Recommended thickness of the phone is no
more than 13MM).
Part Name
Car Holder /
Air Vent Base
- Fixed Nut
- Clamp Arms
- Quick Release Button
- Supporting Feet
- Button
- Air Vent Clip
- Ball Joint
Installation Steps
- Loosen the fixing nut completely, push the ball joint through the fixing nut into the recess at the back of the car mount.
- Tighten the fixed nut.
- Press the button to adjust the opening of the clip, find a suitable place (car vent blade) to insert the car holder, for a better using experience. please make sure to insert enough depth.
- Release the button and the clip will automatically clamped and fix on the car vent blade.
- Adjust the angle of the car holder to fit your sight.
Using Instructions
- Pressing the quick release button, the clip arms will automatically pop open.
- Put the phone in and press down to tighten the clamp arm and hold the phone firmly.
- After use, press the quick release button again to open the clip arm and take out the phone.
Note: After placing the phone, please press down and make sure the clip arm retracts into place to ensure a better experience. If there is a lag, please repeat the above steps to resume use.
Attention
- Please install the car holder on a suitable place before starting driving navigation, do not operate and adjust the car holder during driving.
- Do not install the car holder on a place which will influence the operation of airbag and driving.
- Keep the car holder away from children.
TEL: 1-800-360-5881
EMAIL: support@blukartech.com
WEBSITE: www.blukartech.com
© Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
All rights reserved.
Product Name: Car Phone Holder
Model: K9754
Manufacturer: Shenzhen Teng Xun Zhan Yi
Technology Co., Ltd.
Manufacturer Address: Room 302, Building 8, Yunli
Intelligent Park, Fada Road, Bantian Street, Longgang
District, Shenzhen, Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>