Blukar K9111 LED Headlamp User Guide
- June 15, 2024
- Blukar
Table of Contents
User Guide
Model: K9111
www.blukartech.com
Welcome
Thank you for purchasing this Blukar product. To ensure the best performance and safety, please read these instructions carefully before operating the product. It is strongly recommended that you keep this manual for future reference.
Packing List
1 x Headlamp
1 x Headband
1 x USB Cable
1 x User Manual
Specifications
Brightness Mode: XPG Strong Light / COB Strong Light / XPG + COB Strong Light
/ COB Strong Red Light / SOS Red Strobe Light
Battery Capacity: 1200mAh
Adjustable Angle: 45°
Physical Diagram
- Sensor Button
- Switch Button
- Headlamp
- Charging Port
- Headband
- Angle Adjustment Plate
- Sensor Indicator
- Battery Level Indicator
On / Off Mode
Press the switch button 1 time to turn on the light (XPG Light, Strong Light).
Press the switch button 2 times to switch the light (COB Light, Strong
Light).”
Press the switch button 3 times to switch the light (XPG + COB Light, Strong
Light ).
Press the switch button 4 times to switch the light (COB Light, Strong Red
Light).
Press the switch button 5 times to switch the light (COB Light, SOS Red Strobe
Light).
Press the switch button 6 times to turn off the light and the battery level
indicator goes out after 3 seconds.
Sensor Mode
Press the sensor button 1 time, the sensor indicator (red) and the battery
level indicator (blue) are on, then enter the sensor mode (Sensor Mode, XPG
Light, Strong Light).
Press the sensor button 2 times to switch the light (Sensor Mode, COB Light,
Strong Light).
Press the sensor button 3 times to switch the light (Sensor Made, XPG+COB
Light, Strong Light).
Press the sensor button 4 times to turn off the sensor mode and turn off the
light, and the battery level indicator goes out after 3 seconds.
Note
- In any operating mode, if you select a brightness mode and No operation for more than 5 seconds, the light will directly switch off when you press the button again.
- No battery indication in red light mode.
- Waving your hand within 15cm in front of the headlamp to turn on/off the light in sensor mode.
Charging Mode
Connect the power supply, the battery level indicator will light up, and
enter the charging mode. During the charging process, the battery level
indicator will change with the remaining battery power. When fully charged,
the four blue indicator lights are always on.
(Please use the supplied or certified USB cable for charging. After charging,
please close the dust cover to protect the USB port.)
**Warning**
- When the light of the headlamp becomes weak, please turn it off to prevent damage to the battery.
- Do not directly irradiate the eyes, because strong light can hurt the eyes, especially to children.
- Do not place the product near flammable, explosive or dangerous objects.
- Do not place it where there is water or in an extremely hot environment.
- Do not damage the product in any way.
- Do not disassemble the product to avoid safety hazards.
- Do not throw or shake the product.
- Children under the age of 6 must use this light with adult supervision.
TEL: 1-800-360-5881
EMAIL: support@blukartech.com
WEBSITE: www.blukartech.com
© Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
All rights reserved.
Product Name: LED Headlamp
Model: K9111
Manufacturer: Shenzhen Teng Xun Zhan Yi Technology
Co., Ltd.
Manufacturer Address: Room 302, Building 8, Yunli
Intelligent Park, Fada Road, Bantian Street, Longgang
District, Shenzhen, Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>