Blukar K9789 Car Cell Phone Holder User Guide
- June 15, 2024
- Blukar
Table of Contents
Blukar K9789 Car Cell Phone Holder
Welcome
Thank you for purchasing this Blukar product. In order to ensure optimum performance and safety, please read this user manual carefully and keep it for future reference. If you need any additional assistance, please contact our customer support team or send us an email to support@blukar.com.
Product Specifications
- Materials: ABS+PC
- Applicable Places: Car Air Outlet
Installation Steps
Structure Picture
- Loosen the fixed nut completely. let the ball joint through the fixed nut (The thread must face the groove) and push rt to the groove behind the car holder firmly.
- Tighten the fixed nut. I
- Turn the adjustment knob to adjust the length of the hook clip, find the right position (car vent blade), insert the car holder hook into the car vent blade and turn the adjustment knob to tighten the hook clip and fix it on the car vent blade. (Please do not over rotate to avoid damaging the car vent blade.)
- Adjust the angle of the car holder to fit your sight.
Using Steps
- Pressing the quick release button on the back of the car holder, the clip arms will automatically pop open.
- Place the phone and push the clip arms at both ends to tighten t he clip arms and hold the phone firmly.
- After use, press the quick release button again to open the clip arm and take out the phone.
Attention
-
Please install the car holder on a suitable place before starting driving navigation, do not
operate and adjust the car holder during driving. -
Do not install the car holder on a place which will influence the operation of airbag and driving
-
Keep the car holder away from children.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>