AVANGARDE 250 LED Spot User Manual

: June 15, 2024
: AVANGARDE

Table of Contents

AVANGARDE 250 LED Spot
Product Information
Product Usage Instructions:

AVANGARDE 250 LED Spot

AVANGARDE-250-LED-Spot

Product Information

Product Name: AVANGARDE LED SPOT
Version: Vees i on 1.0
Power Consumption: 320W
Control Signal: DMX512, master-slave and sound activated or
auto operation (9 built-in programs)
Control Channels: 16/14/18 DMX MX-512
LED Lifespan: 50,000 hours
Weight: Net – 14kgs, Gross – 17.12kgs
Features:
- High brightness and stability
- Low power consumption
- Built-in wireless capability
- Linear motorized zoom with 90-360 beam angle
- 2.5m-15m electric focus
- 3-Facet prism with variable speed and direction
- Frost Filter (Hybrid effect for wash)
- Linear LED dimming
- LCD display
- XLR control
- IP20 protection rating
- 55dB at 3’dB noise level
- 2* 1/4 turn fastening Omega clamps
- 25T/sec high-speed LED shutter: strobe effect with variable speed
- Preset variable/random strobe and dimming pulse
Movement: 540°/630°/360° PAN and 270°/180°/90° TILT
Colors: 1 Color wheel with 7 colors plus open
Gobos:
- 1 Static gobo wheel with 8 gobos plus open
- 1 Rotatable gobo wheel with 6 rotatable and interchangeable glass gobos plus open
Function:
- Improved optics and flat beam field
- Variable direction rainbow effect with speed adjustable
- Fan cooling system
- Constant temperature readout and management function
- -35°C to 45°C max ambient temperature

Product Usage Instructions:

Unpacking:
- Carefully unpack the fixture and check for any damage during transportation.
- Check if the following items are included inside the box:
- User Manual – 1
- Moving Head – 41
- Safety Cable – 1
Installation:
- Mount the fixture in areas outside walking paths, seating areas, or where unauthorized personnel cannot reach it.
- Ensure that the installation area can hold a minimum point load of 10 times the device’s weight.
- Always secure the fixture with a secondary safety attachment, such as an appropriate safety cable.
- Do not stand directly below the device when mounting, removing, or servicing it.
- Mount the fixture from a ceiling or set it on a flat level surface, keeping it at least 0.5m (1.5ft) away from any flammable materials.
Operation:
- Ensure that the fixture is in normal temperature before turning it on. Avoid turning it on immediately after transportation if it has been exposed to severe temperature differences.
- Refer to the user manual for detailed instructions on operating the fixture.

AVANGARDE
LED SPOT
0 00
Vees i on 1.0
USER MANUAL
Be sure to read the USER MANUAL carefully before using this product. · Be sure to keep the USER MANUAL properl y for future needs. · Use this product correctly when you can fully understand the User Manual

LED SPOT

2. UNPACKING

Tho

adopts a 250W white LED lamp which features high brightness and stability.

Please carefully unpack it whon you receive the fixture and check whether it is damaged during the

transportation. And plonno chock whether the following items are included inside the box:

Curo

Standard

Stmdotd Powor Cnblo·t

USER MANUAL User Manual’ 1

Moving Head 41

o Hanging Kit · 2

Sionnl

Safety Cabio’ 1

The SPOT is made of a new type of high temperature strength of engineering plasticg ond cast aluminum casing with nice outlook . The fixture is designed and manufactured strictly following CE standards, complying with international standard DMX512 protocoi. iti-s available indopondontly controlled and linkable with each other for operation. And it is applicable for large-scalo Iivo pot formances, theater, studio, nightc$ubs and discos. This manual covers the important information on installationand applications. Meanwhile, please keop this manual well for future needs.

LED SPOT

3. TECHNICAL

SPEC I CAT

Led

Module LED

I aajp, 7.500K. 50000 hours lifespa

InputVoltage·. AC90-260V

Power Consumption: 320W

Control Signal: DMX512, master-slave and sound activated or auto operation (9 built-in programs)

C ontrol Chant-o!: 16/14/18 DMX MX-512

USITT

Dimensions:

Packing Dimensions:

Net Weight: 14kgs

Gross Weight: 17.12kgs

I.ow power consumption B uit-in wireless is available Linear motorized zoom with 90-360 beam angle2 .5m-15m electric focus 3-Facet prism with variable speed and direction Frost Filter (Hybrid effect for wash)

0-1000/0 Linear LED di
DMX512, master-slave and sound activated or auto rat ion

l’ LC D display

4 control

Powe r con

II

XLR

‘O l. T

11’20 protect ion rating
55dB at 3’dB 2* 1/4 turn fastening Omega clamps 25T/sec high speed LED shut ter:strobe effect with
I e speed

Preset variable/random strobe and dimming pulse

INFORMATION

movement 540s/6300/3600 PAN and 2700/180’/900 TILT movement

COLORS: 1 Color wheel with 7 colors plus open
Scan position memory. auto reposition after unexpected movement

GOBOS: 1 Static gobo wheel with 8 gobos plus open 1 Rotatable gobo wheel with 6 rotatable and interchangeable glass gobos plus open with speed adjustable, stream effect, dithering
effect and rotatable clockwise or anticlockwise
Rotatable gobo wheel can be Gobo indexing Gobo size 22.9mm (external dimensions)/ 18mm (inner dimensions)
Gobo overlay (gobo morphing)

FUNCTION:
Improved optics and fiat beam field Variable direction rainbow effect with speed adjustable Fan cooling system
Constant temperature readout and management function
-35’C 450C max ambient temperature

357

210

RotatingGobo Wheel

ooooooo Static Gobo Wheel

IO
‘221

Color Wheel
eeeooeoeoee cooo CTO CTB

‘l. PHOTOMETRICS DIAGRAM

Distance

2.5m

5m

7.5m

10m

LED SPOT

90 (LUX) Diameter(m)

50800 (DO. 48

360 (LUX) 5600 Diameter(m) 01.6

16008 00. 92 2650
(03. 18

6610 (b 1,35 050

3840 ml.78
490 06.34

5. OPERATION INSTRUCTIONS
The SPOT is for on-site decoration purpose. Don’t turn on the fixture if it’s been through severe temperature difference like after transportation because it might damage the light due to the environment changes. So make sure to operate the fixture until it is in normat temperature.
This light should be keep away from strong shaking during any transportation or movement. Don’t pull up the light by only the head, or it might cause damages to the mechanical parts. Don’t expose the fixture in overheat, moisture or environment with too much dust when installing it. And don’t lay any power cables on the floor. Or it might cause electronic shock to the people. Make sure the installationplace is in good safety condition before installingthe fixture. Make sure to put the safety chain and check whether the screws are screwed properly when installing
tho fixturo.
Mako nuro tho Ions aro in good condision.lt’s recommendedto replace the units if there are any damages or sovoro gcrntch. Mako suro tho xturo is oporatod by qualitied personnel who knows the fixture before using. Keep tho original packages if any second shipment is needed. Don’t try to chango tho fixturoswithout any instruction by the manufacturer or the appointed repairing agencies. It is not in warranty rango if there are any malfunctionsfrom not following the user manual to operate or any illegal operation, like shock short circuit, electronic shock , lamp broke, etc.

LED SPOT

INSTALLATIONS

For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might be reached by unauthorized personnel.
Before mounting the fixture to any surface, make sure that the installationarea can hold a minimum point load of 10 times the device’s weight. Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the fixture. from a ceiling,or set on a flat level surface (see illustrationbelow). Be sure this fixture is kept at least 0.5m (1.5 f t) away from any flammable materials (decoration etc.).
Always use and install the supplied safety cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails.

o Kit

Mounting points.-
Overhead mounting requires extensive experience, includingamongst others calculating working load limits, a fine knowledge of the installationmaterial being used, and periodic safety inspection of all installationmaterialand the fixture. If you lack these qualifications, do not attempt the installationyourself. Improper installationcan result rn bodily injury.
Be sure to complete all rigging and installation procedures before connectingthe main power cord to the appropriatewall outlet.

Clamp Mounting:
The SPOT provides a unique mounting bracket assembly that integrates the bottom of the base, and the safety cable rigging point in one unit (see the illustrationbelow). When mounting this fixture to truss be sure to secure an appropriately rated clamp to the included omega bracket using a MI O screw fitted through the center hole of the “Hanging Kit”. As an added safety measure be sure to attached at feast one properly rated safety cable to the fixture using on of the safety cable rigging point integrated in the base assembly .

o
o

LED SPOT

PROTOCOL

Mode/Channel 16CH 14C H 18C H

1

2

3

2

3

4

5

3

5

3

5

Value

Function

0.255 0.255 0.255

pan PAN Movement
Pan-fine
FinecontrobfPanmovement
Tilt
TiltMovement

0.255
0.9 I O. .19
20.29 30.39 40.49 50.59 60.69 70.79 80.89 90..127 128..189 190-193 194.255
5.9 10..14
15..19 20, 24 25.29 30.34 35.39 40.44 45.49 50.54 55.59 60..64

FinecontrobfTiltmovement Color wheel O en/ white Colorl
Color2 Color3
Color5 Color6 Color7 Color8 Color9 Forwardsrainboweffectfromfasttoslow Colorrotatiorsto Backwards rainbow effect fromslowtofast Color wheel (Mode 2) O en/ white White+ Colorl Colorl Colorl + Color2 Color2 Color2 + Color3 Color3 Color3 + Color4
Color4 + Color5 Color5
Color5 + Color6 Color6

08

LED SPOT

65.69

Color6 + Color7

70..74

Color7

75..79

Color7 + Color8

80 , 4

Color8

5

3

5

85.89

90..94

Color8 + Color9 Color9

95..127 128..189

Color9 + White Forwards rainbow effect from fast to slow

190-193 194.255

Color rotation sto Backwards rainbow effect from slow to fast
Gobo wheel 1

0.9 10..19

O en obo 1

20.29

ob02

30.39

ob03

40..49

ob04

50.59

ob05

6

4

6

60..69 70..89

ob06 Gobo 1 shake slow to fast

90..109

Gobo 2 shake slow to fast

110..129

Gobo 3 shake slow to fast

130..149

Gobo 4 shake slow to fast

150..169

Gobo 5 shake slow to fast

170..189

Gobo 6 shake slow to fast

190.255
o..1 27

Rot obo wheel cont rotation slow to fast Gobo 1 rotation Gobo indexin

7

5

7

128..189

Forwards obo rotation from fast to slow

190..193

Gobo rotation sto

194.255 Backwards obo rotation from slow to fast Gobo wheel 2

0.9

Holewiths ot

10..19

Gobol

20.29

Gob02

30.39

Gob03

40..49

Gob04

50.59

Gob05

8

6

8

60.69

70..79

Gob06 Gob07

80.89

Gob08

90.99

Gob09

100..109

Gob010

110..119

Goboll

120..129

Gobo 1 shake slow to fast

130..139

Gobo 2 shake slow to fast

140..149

Gobo 3 shake slow to fast

LED SPOT

150..159

Gobo 4 shake slow to fast

160..169

Gobo 5 shake slow to fast

170..179

Gobo 6 shake slow to fast

180..189

Gobo 7 shake slow to fast

8

6

8

190..199

Gobo 8 shake slow to fast

200.209 210.219

Gobo 9 shake slow to fast Gobo 10 shake slow to fast

220.229

Gobo 11 shake slow to fast

230.255 Gobo wheel rotationfrom slow to fast

Shutter

0.31

Shutter closed

32.63 64.95

shutter o en Strobe effect slow to fast

9

7

9

96..127

shutter o en

128.159 Pulse-effectinse uencesslowtofast

160..191

shutter o en

192223

Random strobe effect slow to fast

224.255

shutter open

10

8

10

0.255

Dimmer DimmerO%…1000/0

11

9

11

0.255

12

10

12

0.255

Focus
In near toout far Zoom
In near toout far Rrotating prism, Prism

13

11

0.6

OFF

13

6..127

ON

128.189

Forwards rotation from fast to slow

190..193

Prism rotation sto

194.255

Forwards rotation from fast to slow

Frost

14

12

14

o..1 99

200.255

Frost OFF Frost ON Speed pan/tile

15

13

0.225

15

226.235

236.245

246.255

max to min s eed blackout b movement blackout b all wheel chan in
no function

0..19

20.29

30.39

40..79 80. B4

85.87

88,90

16

14

16

91.93 94.96

97..99 100..109

110,.119 1 20, .129

130..139

140..149

150..159

160..169

170..179

180..189

190..199

200.209

210.219

220.229 230.239

240.249 250.255

0.255
18
0.255

LED SPOT
Special function No function No function
No function
No function All Motor reset Scan motor reset Colors motor reset Gobo motor reset
No function
Other motor reset Internal ro ram 1 Internal ro ram 2 Internal ro ram 3 Internal ro ram 4 Internal ro ram 5 Internal ro ram 6 Internal ro ram 7 Internal ro ram 8 Internal Sound ro ram 1 Internal Sound ro ram 2 Internal Sound ro ram 3 Internal Sound ro ram 4 Internal Sound ro ram 5 Internal Sound ro ram 6 Internal Sound ro ram 7 Internal Sound ro ram 8
Color Time max to mins eed
Gobo Time
max to mins eed