BOSCH HHF133BS0B Built In Oven Instruction Manual

BOSCH HHF133BS0B Built In Oven

Product Information

Product: Oven

Model: HHF133BS0B

User manual and installation instructions available in English

Product Usage Instructions

Safety

• Always place accessories in the cooking compartment the right way round.
• Risk of fire! Combustible objects left in the cooking compartment may catch fire. Never store combustible objects in the cooking compartment.
• Risk of burns! The appliance and its parts that can be touched  become hot during use. Exercise caution to avoid touching heating elements. Keep young children under 8 years of age away from the appliance. Accessories and cookware get very hot, so always use oven gloves to remove them from the cooking compartment.
• When the cooking compartment is hot, any alcoholic vapors inside may catch fire. Only use small quantities of drinks with a high alcohol content in food. Do not heat undiluted spirits (15% vol.) when marinating or pouring over food. Open the appliance door carefully.
• Risk of scalding! The accessible parts of the appliance become hot during operation. Never touch these hot parts. Keep children at a safe distance. Hot steam may escape when you open the appliance door, so open it carefully. If there is water in the cooking compartment when it is hot, this may create hot steam. Never pour water into the cooking compartment when it is hot.
• Risk of injury! Scratched glass in the appliance door may develop into a crack. Do not use harsh or abrasive cleaners or sharp metal scrapers to clean the glass on the oven door, as they may scratch the surface. The hinges on the appliance door move when opened and closed, so keep your hands away from them. Always keep the appliance door closed during and after operation to prevent injuries.
• The appliance and its parts that can be touched may have sharp edges. Take care when handling and cleaning them. If possible, wear protective gloves. Components inside the appliance door may also have sharp edges, so wear protective gloves when handling them.
• Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist staff. Only use genuine spare parts when repairing the appliance. If the power cord of this appliance is damaged, it must be replaced by the manufacturer, a service agent, or similarly qualified persons to avoid electric shock.
• Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from children.

Preventing Material Damage
No specific instructions provided in the user manual extract.

Environmental Protection and Saving Energy
No specific instructions provided in the user manual extract.

Installation Instructions
No specific instructions provided in the user manual extract.

Register your new device on MyBosch now and get free benefits: bosch- home.com/welcome

User manual and installation instructions

Safety

Observe the following safety instructions.

General information

• Read this instruction manual carefully.
• Keep the instruction manual and the product information safe for future reference or for the next owner.
• Do not connect the appliance if it has been damaged in transit.

Intended use
This appliance is designed only to be built into kitchen units. Read the special installation instructions.
Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the warranty.

Only use this appliance:

• To prepare meals and drinks.

• in private households and in enclosed spaces in a domestic environment.

• up to an altitude of max. 4000 m above sea level.
  Do not use the appliance:

• with an external timer or a remote control.

Restriction on user group
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
Do not let children play with the appliance.
Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised.
Keep children under the age of 8 years away from the appliance and power cable.

Safe use
Always place accessories in the cooking compartment the right way round.

WARNING ‒ Risk of fire!
Combustible objects that are left in the cooking compartment may catch fire.

• Never store combustible objects in the cooking compartment.

• If smoke is emitted, the appliance must be switched off or the plug must be pulled out and the door must be held closed in order to stifle any flames.
  Loose food remnants, fat and meat juices may catch fire.

• Before using the appliance, remove the worst of the food residues and remnants from the cooking compartment, heating elements and accessories.
  Opening the appliance door creates a draught. Greaseproof paper may come into contact with the heating element and catch fire.

• Never place greaseproof paper loosely over accessories when preheating the appliance and while cooking.

• Always cut greaseproof paper to size and use a plate or baking tin to hold it down.
  Overheating of the appliance may cause a fire.

• Never install the appliance behind a decorative door or unit door.

WARNING ‒ Risk of burns!
The appliance and its parts that can be touched become hot during use.

• Caution should be exercised here in order to avoid touching heating elements.

• Young children under 8 years of age must be kept away from the appliance.
  Accessories and cookware get very hot.

• Always use oven gloves to remove accessories or cookware from the cooking compartment.
  When the cooking compartment is hot, any alcoholic vapours inside may catch fire. The appliance door may spring open. Hot steam and jets of flame may escape.

• Only use small quantities of drinks with a high alcohol content in food.

• Do not heat spirits (≥ 15% vol.) when undiluted (e.g. for marinating or pouring over food).

• Open the appliance door carefully.WARNING ‒ Risk of scalding!
  The accessible parts of the appliance become hot during operation.

• Never touch these hot parts.

• Keep children at a safe distance.
  Hot steam may escape when you open the appliance door. Steam may not be visible, depending on the temperature.

• Open the appliance door carefully.

• Keep children at a safe distance.
  If there is water in the cooking compartment when it is hot, this may create hot steam.

• Never pour water into the cooking compartment when the cooking compartment is hot.WARNING ‒ Risk of injury!
  Scratched glass in the appliance door may develop into a crack.

• Do not use any harsh or abrasive cleaners or sharp metal scrapers to clean the glass on the oven door, as they may scratch the surface.
  The hinges on the appliance door move when the door is opened and closed, which could trap your fingers.

• Keep your hands away from the hinges.
  If you leave the appliance door open, people may bump into it, resulting in injury.

• Always keep the appliance door closed during and after operation.

The appliance and its parts that can be touched may have sharp edges.

• Take care when handling and cleaning them.

• If possible, wear protective gloves.
  Components inside the appliance door may have sharp edges.

• Wear protective gloves.WARNING ‒ Risk of electric shock!
  Incorrect repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.

• Only use genuine spare parts when repairing the appliance.

• If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk.
  If the insulation of the power cord is damaged, this is dangerous.

• Never let the power cord come into contact with hot appliance parts or heat sources.

• Never let the power cord come into contact with sharp points or edges.

• Never kink, crush or modify the power cord.
  An ingress of moisture can cause an electric shock.

• Do not use steam- or high-pressure cleaners to clean the appliance.
  If the appliance or the power cord is damaged, this is dangerous.

• Never operate a damaged appliance.

• Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.

• If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.

• Call customer services. → Page 18

WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.

• Keep packaging material away from children.

• Do not let children play with packaging material.
  Children may breathe in or swallow smallparts, causing them to suffocate.

• Keep small parts away from children.

• Do not let children play with small parts.

Halogen bulb

WARNING ‒ Risk of burns!
The bulbs in the cooking compartment getvery hot. There is still a risk of burning forsome time after they have been switched off.

• Do not touch the glass cover.
• Avoid contact with your skin when cleaning.

WARNING ‒ Risk of electric shock!
When changing the bulb, the bulb socket contacts are live.

• Before replacing the bulb, ensure that the appliance is switched off in order to prevent a potential electric shock.
• Also unplug the appliance from the mainsor switch off the circuit breaker in the fusebox.

Preventing material damage

General

ATTENTION!
Objects on the cooking compartment floor at over 50 °C will cause heat to build up. The baking and roasting times will no longer be correct and the enamel will be damaged.

• Do not place any accessories, greaseproof paper or foil of any kind on the cooking compartment floor.

• Only place cookware on the cooking compartment floor if a temperature under 50 °C has been set.
  When the cooking compartment is hot, any water inside it will create steam. The change in temperature may cause damage.

• Never pour water into the cooking compartment when it is still hot.

• Never place cookware containing water on the cooking compartment floor.
  The prolonged presence of moisture in the cooking compartment leads to corrosion.

• Allow the cooking compartment to dry after use.

• Do not keep moist food in the cooking compartment for a long time with the door closed.

• Do not store food in the cooking compartment.
  Leaving the appliance to cool down with the door open will damage the front of neighboring kitchen units over time.

• Always allow the cooking compartment to cool down with the door closed after cooking at high temperatures.

• Take care not to trap anything in the appliance door.

• Only leave the cooking compartment to dry with the door open if a lot of moisture was produced during operation.
  Fruit juice dripping from the baking tray leaves stains that cannot be removed.

• When baking very juicy fruit flans, do not pack too much on the baking tray.

• If possible, use the deeper universal pan.
  Using oven cleaner in a hot cooking compartment damages the enamel.

• Never use oven cleaner in the cooking compartment when it is still warm.

• Remove all food remnants from the cooking compartment and the appliance door before you next heat up the appliance.
  If the seal is very dirty, the appliance door will no longer close properly during operation. This may damage the front of adjacent kitchen units.

• Keep the seal clean at all times.

• Never operate the appliance if the seal is damaged or missing.
  Sitting or placing objects on the appliance door may damage it.

• Do not place, hang or support objects on the application door.

• Do not place cookware or accessories on the appliance door.

Environmental protection and saving energy

Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.

• Sort the individual components by type and dispose of them separately.

Saving energy
If you follow these instructions, your appliance will use less power.
Only preheat the appliance if the recipe or the recommended settings tell you to do so.

• Not preheating the appliance can reduce the energy used by up to 20%.
  Use dark-colored, black-coated or enamelled baking tins.

• These types of baking tin absorb the heat particularly well.
  Open the appliance door as little as possible during operation.

• This maintains the temperature in the cooking compartment and eliminates the need for the appliance to reheat.
  When baking multiple dishes, do so in succession or in parallel.

• The cooking compartment is heated after baking the first dish. This reduces the baking time for the second cake.
  If the cooking time is relatively long, you can switch the appliance off 10 minutes before the cooking time ends.

• There will be enough residual heat to finish cooking the dish.
  Remove any accessories that are not being used from the cooking compartment.

• Accessories that are not being used do not need to be heated.
  Allow frozen food to defrost before cooking.

• This saves the energy that would otherwise be required to defrost it.

Note:
The appliance requires:

• a maximum of 1 W when the appliance is in operation with the display switched on
• a maximum of 0.5 W when the appliance is in oper- ation with the display switched off

Familiarising yourself with your appliance

Control panels
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

Controls
You can use the controls to configure all functions of your appliance and to obtain information about the operating status.
On certain models, specific details such as colour and shape may differ from those pictured.

1. Buttons and display
   The buttons are touch-sensitive surfaces. To select a function, simply press lightly on the relevant field.
   The display shows symbols for active functions and the time-setting options.
   “Buttons and display”, Page 6

2. Function selector
   Use the function selector to set the types of heating and other functions.
   You can turn the function selector clockwise or anti-clockwise from the zero setting .
   Depending on the appliance, the function selector can be pushed in. Press on the function selector to click it into or out of the zero setting “Types of heating and functions”, Page 6

3. Temperature selector
   Use the temperature selector to set the temperature for the type of heating and select settings for other functions.
   You can only turn the temperature selector clockwise from the zero setting until it offers resistance. You cannot turn it any further than this.
   Depending on the appliance, the temperature selector can be pushed in. Press on the temperature selector to click it into or out of the zero setting .
   “Temperature and setting levels”, Page 7

Buttons and display
You can use the buttons to set various functions for your appliance. The display shows the settings.
If a function is active, the corresponding symbol lights up on the display. only lights up when you change the time.

Types of heating and functions
To ensure that you always find the right type of heating to cook your food, we explain the differences and applications below.

Additional functions
Here, you can find an overview of other functions of your appliance.

Temperature and setting levels
There are different settings for the types of heating and functions.

Note: For temperature settings above 250 °C, the appliance reduces the temperature to approx. 240 °C after approx.
10 minutes. If your appliance has the top/bottom heating or bottom heating types, this temperature reduction does not take place.

Heat-up indicator
The appliance indicates when it is heating up.
When the appliance is heating, ⁠ lights up on the display.
This symbol goes out when heating is paused.
When you preheat the appliance, the optimal time to place your food in the cooking compartment is when the symbol first goes out.

Note: Due to thermal inertia, the temperature that is displayed may differ slightly from the actual temperature inside the cooking compartment.

Cooking compartment
The functions in the cooking compartment make your appliance easier to use.

Rails
The shelf supports in the cooking compartment enable you to place accessories at different heights.
The cooking compartment has five shelf positions. The shelf positions are numbered from bottom to top.

You can remove the rails, e.g. for cleaning.
→ “Rails”, Page 13

Self-cleaning surfaces
The back panel in the cooking compartment is self-cleaning.
The self-cleaning surfaces are coated with a porous, matte ceramic layer and have a coarse surface.
When the appliance is in operation, the self-cleaning surfaces absorb splashes from roasting or grilling and break them down.

If the self-cleaning surfaces no longer clean themselves adequately during operation, heat up the cooking compartment specifically to the right temperature.
“Cleaning self-cleaning surfaces in the cooking compartment”, Page 12

Lighting
The oven light lights up the cooking compartment.
With most types of heating and functions, the lighting lights up during operation. If you use the function selector to end the operation, the lighting switches off.
The oven light setting on the function selector can be used to switch on the light without heating.

Appliance door
If you open the appliance door during operation, the operation continues.

Cooling fan
The cooling fan switches on and off depending on the appliance’s temperature. The hot air escapes above the door.

ATTENTION!
Do not cover the ventilation slot above the appliance door. The appliance overheats.

• Ensure that the ventilation slots are unobstructed.
  To ensure that the appliance cools down more quickly after operation, the cooling fan continues to run for a certain period afterwards.

Condensation
Condensation can occur in the cooking compartment and on the appliance door when cooking. Condensation is normal and does not adversely affect appliance operation. Wipe away the condensation after cooking.

Accessories

Use original accessories. These have been made especially for your appliance.

Note: Heat may deform the accessory. This deformation has no effect on the function. When the accessory cools down, it will regain its original shape.

The accessories supplied may differ depending on the appliance model.

Using the accessory
Always slide the accessory into the cooking compartment correctly. This is the only way that you can remove the accessory halfway without it tipping.

1. Insert the accessory between the two guide rods for a shelf position.
2. Slide the accessory all the way in, making sure that the accessory does not touch the appliance door.

Note: Take any accessories that you will not be using out of the cooking compartment while the appliance is in operation.

Other accessories
You can purchase other accessories from our aftersales service, specialist retailers or online.
You will find a comprehensive range of products for your appliance in our brochures and online: www.bosch-home.com
Accessories vary from one appliance to another. When purchasing accessories, always quote the exact product number (E no.) of your appliance.
You can find out which accessories are available for your appliance in our online shop or from our aftersales service.

Before using for the first time

Configure the settings for initial start-up. Clean the appliance and accessories.

1. Initial configuration
   You have to implement settings for the initial configuration before you can use your appliance.

2. Cleaning the appliance before using it for the first time
   Clean the cooking compartment and accessories before using the appliance to prepare food for the first time.

3. Remove the accessory and the leftover packaging, such as polystyrene pellets, from the cooking compartment.

4. Before heating, wipe the smooth surfaces in the cooking compartment with a soft, damp cloth.

5. Ventilate the room while the appliance is heating.

6. Set the type of heating and the temperature.
   “Basic operation”, Page 9

7. Switch off the appliance after the specified cooking time.

8. Wait until the cooking compartment has cooled down.

9. Clean the smooth surfaces with soapy water and a dish cloth.

10. Clean the accessory with soapy water and a dish cloth or a soft brush.

Basic operation

Switching on the appliance

• Turn the function selector to any position other than the “Off” position ⁠.
  • The appliance is switched on.

Switching off the appliance

• Turn the function selector to the “Off” position ⁠.
• The appliance is switched off.

Types of heating and temperature

1. Use the function selector to set the type of heating.
2. Use the temperature selector to set the temperature or grill setting.
   • The appliance starts heating after a few seconds.
3. When the dish is ready, switch off the appliance.

Tips

1. The most suitable type of heating for your food can be found in the description of the types of heating.
2. You can also set a cooking time and an end time on the appliance.
   “Time-setting options”, Page 9

Changing the type of heating
You can change the type of heating at any time.

• Use the function selector to set the required type of heating.

Changing the temperature
You can change the temperature at any time.

• Turn the temperature selector to set the desired temperature.

Time-setting options

Your appliance has different time-setting options which ensure that operation can be controlled.

Overview of the time-setting options
You can use the button to select the different timesetting options.

Setting the timer
The timer runs independently of the appliance when it is in operation. The timer can be set up to 23 hours and 59 minutes regardless of whether the appliance is on or off. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time which has elapsed.

Note: The timer and cooking time cannot count down at the same time. If a cooking time has already been set, you cannot set the timer.

1. Press repeatedly until is selected in the display.

2. Use the ⁠ or ⁠ button to set the timer duration.
   Up to 10 minutes, the timer duration can be set in 30-second increments. The time increments become bigger as the value increases.

   • The timer starts and the timer duration begins to count down after a few seconds.
   • An audible signal sounds and the timer duration is zero in the display when the timer duration has elapsed.

3. Once the timer duration has elapsed

   • Press any button to switch off the timer.

Changing the timer
The timer duration can be changed at any time.
Requirement: is highlighted in the display.

• Use the or button to change the timer duration.
  • The appliance applies the change after a few seconds.

Cancelling the timer
The timer duration can be cancelled at any time.
Requirement: is highlighted in the display.

• Use the button to reset the timer duration to zero.
  • After a few seconds, the appliance applies the change and goes out.

Setting the cooking time
The cooking time can be set to up to 23 hours and 59 minutes for the operation.

Requirement: The type of heating and temperature or setting have been set.

1. Press repeatedly until is selected in the display.

2. Use the  – or  + button to set the cooking time.
   The cooking time can be set in one-minute increments up to one hour, and then in five-minute increments.

   • After a few seconds, the appliance starts heating and the cooking time counts down.
   • When the cooking time has elapsed, a signal sounds and the duration is at zero in the display.

3. When the cooking time has elapsed:

   • Press any button to end the signal prematurely.
   • To set another cooking time, press the ⁠ button.
   • When the dish is ready, switch off the appliance.

Changing the cooking time
The cooking time can be changed at any time.
Requirement: is highlighted in the display.

1. Change the cooking time using the – or + button.
   • The appliance applies the change after a few seconds.

Cancelling the cooking time
The cooking time can be cancelled at any time.
Requirement: is highlighted in the display.

1. Reset the cooking time to zero using the – button.
   • After a few seconds, the appliance applies the change and continues to heat without a cooking time.

Setting the end time
You can delay the time at which the cooking time is due to end by up to 23 hours and 59 minutes.

Notes

• The end time cannot be set for types of heating with grill function.
• In order to achieve a good cooking result, do not delay the end time once the appliance is already operating.
• Food will spoil if you leave it in the cooking compartment for too long.

Requirements

• The type of heating and temperature or setting have been set.
• A cooking time must be set.
  1. Press repeatedly until is selected in the display.
  2. Press the ⁠- or +⁠ button.
  • The display shows the calculated end time.
  3. Use the ⁠ – or +⁠ button to delay the end time.
  • After a few seconds, the appliance applies the setting and the display shows the set end time.
  • Once the calculated start time has been reached, the appliance starts heating up and the cooking time starts counting down.
  • When the cooking time has elapsed, a signal sounds and the duration is at zero in the display.
  4. When the cooking time has elapsed:
  5. Press any button to end the signal prematurely.
  6. To set another cooking time, press the ⁠ button.
  7. When the dish is ready, switch off the appliance.

Changing the end time
In order to achieve a good cooking result, you can only change the set end time before operation starts and the cooking time starts counting down.

Requirement: is highlighted in the display.

• Use the -⁠ or +⁠ button to delay the end time.
  • The appliance applies the change after a few seconds.

Cancelling the end time
You can delete the set end time at any time.

Requirement: is highlighted in the display.

• Reset the end time to the current time plus the set cooking time using the – button.
• After a few seconds, the appliance applies the change and starts heating up. The cooking time counts down.

Setting the time
Once the appliance has been connected to the mains or after a power cut, the time flashes in the display. The time starts at “12:00”. Set the current time.
Requirement: The function selector must be set to the off position.

1. Use ⁠- or + to set the time.
2. Press ⁠.
   • The time that is set appears in the display.

Childproof lock

Secure the appliance to prevent children from accidentally switching it on or changing the settings.

Note: After a power cut, the childproof lock will no longer be active.

Activating and deactivating the childproof lock

Requirement: The function selector must be set to the off position.

• To activate the childproof lock, press and hold the ⁠ button until ⁠ SAFE⁠ ⁠ ⁠ appears in the display.
  • To deactivate the childproof lock, press and hold the ⁠ button until ⁠ ⁠SAFE  ⁠ ⁠ goes out in the display.

Cleaning and servicing

Cleaning agent
To avoid damaging the different surfaces of the appliance, do not use unsuitable cleaning agents.

WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.

• Do not use steam- or high-pressure cleaners to clean the appliance.

ATTENTION!
Unsuitable cleaning agents damage the surfaces of the appliance.

• Do not use aggressive or abrasive cleaning agents.

• Do not use cleaning products with a high alcohol content.

• Do not use hard scouring pads or cleaning sponges.

• Do not use any special cleaners if the appliance is still warm.
  Using oven cleaner in a hot cooking compartment damages the enamel.

• Do not use oven cleaner in the cooking compartment when it is still warm.

• Remove all food remnants from the cooking compartment and the appliance door before you next heat up the appliance.
  New sponge cloths contain residues from production.

• Wash new sponge cloths thoroughly before use.

Suitable cleaning agents
Only use cleaning agents that are suitable for the different surfaces on your appliance.

Follow the instructions on cleaning the appliance.
“Cleaning the appliance”, Page 12

Appliance

Appliance cover

Hob

Cleaning the appliance
In order to avoid damaging the appliance, clean your appliance only as specified, and using suitable cleaning products.WARNING ‒ Risk of burns!
The appliance and its parts that can be touched become hot during use.

• Caution should be exercised here in order to avoid touching heating elements.
  ▶
  Young children under 8 years of age must be kepta way from the appliance.WARNING ‒ Risk of fire!
  Loose food remnants, fat and meat juices may catch fire.

• Before using the appliance, remove the worst of the food residues and remnants from the cooking compartment, heating elements and accessories.

Requirement: Read the information on cleaning agents. → “Cleaning agent”, Page 11

1. Clean the appliance using hot soapy water and adish cloth.
   • For some surfaces, you can use alternative cleaning agents. → “Suitable cleaning agents”, Page 11
2. Dry with a soft cloth.

Cleaning self-cleaning surfaces in the cooking compartment
The back wall in the cooking compartment is self-cleaning. The self-cleaning surfaces are coated with a porous, matt ceramic layer and have a rough surface.When the appliance is in operation, the self-cleaning surfaces absorb splashes from roasting or grilling and break them down. If the self-cleaning surfaces no longer clean sufficiently during operation, heat up the cooking compartment specifically.

ATTENTION!
If the self-cleaning surfaces are not cleaned regularly, the surfaces may be damaged.

• If dark spots can be seen on the self-cleaning surfaces, heat up the cooking compartment.

• Do no use any oven cleaners or abrasive cleaning aids. If oven cleaner accidentally comes into contact with the self-cleaning surfaces, dab the surfaces immediately with water and a sponge cloth. Do not rub them.

  1. Remove the accessories and cookware from the cooking compartment.

  2. Detach the shelf supports and remove them from the cooking compartment.
     → “Rails”, Page 13

  3. Clean coarse dirt with hot soapy water and a soft cloth:

  • From the smooth enamel surfaces
  • From the inside of the appliance cover
  • From the glass cover on the oven lamp
    This prevents stubborn stains.

  4. Remove any objects from the cooking compartment.
     The cooking compartment must be empty.

  5. Use the function selector to set 3D hot air.

  6. Use the temperature selector to set the maximum temperature.

  • The appliance starts heating after a few seconds.

  7. Switch off the appliance after 1 hour.

  8. Once the appliance has cooled down sufficiently, wipe the cooking compartment with a damp cloth.
     Note: Reddish marks may appear on the self-cleaning surfaces. This is not rust, but the residues of salty food. Nutrients such as sugars and proteins are not removed from the surface coating and may stick to the surface. These spots are not harmful and do not impair the cleaning ability of the self- cleaning surfaces.

  9. Attach the shelf supports.
     → “Rails”, Page 13

Cleaning the stainless steel surfaces

1. Observe the information regarding the cleaning agents.
2. Clean using a sponge cloth and hot soapy water in the direction of the finish.
3. Dry with a soft cloth.
4. Apply a thin layer of the stainless steel cleaning product with a soft cloth.
   Tip: You can obtain stainless steel cleaning products from after-sales service or the online shop.

Rails

To clean the rails and cooking compartment thoroughly,you can remove the shelf supports.

Unhooking the rails

WARNING ‒ Risk of burns!

The rails can be very hot.

• Never touch the rails when they are hot.
• Allow the appliance to cool down.
• Keep children at a safe distance.
  • Lift the front rail upwards and unhook it.
  • Then push the entire rail to the front and remove it.

Attaching the rails

1. First insert the rail into the rear socket, press it to the back slightly
2. and insert it into the socket at the front.

The rails fit both on the left and right sides. Shelf positions 1 and 2 are located at the bottom and shelf positions 3, 4 and 5 are located at the top.

Appliance door

It is normally sufficient if you clean the outside of the appliance door. If the appliance door is very dirty on the inside and outside, you can remove the appliance door and clean it.

Door hinges

WARNING ‒ Risk of injury!
When the hinges are not secured, they can snap shut with great force.

• If you open the appliance door, ensure that the locking levers are fully open or fully closed.

  1. The oven door hinges each have a locking lever.
     When the locking levers are closed, the oven door is secured in place.
     It cannot be detached.

  2. When the locking levers are open in order to detach the oven door, the hinges are secured.
     The hinges cannot snap shut.

Removing the appliance door

1. Open the oven door fully.
2. Open the locking levers on the left- and right-hand hinges.
3. Close the oven door as far as the limit stop. Grip the left and right hand sides of the door with both hands. Close the door slightly more and remove it.

Removing the door panes
The glass panes of the oven door can be removed to make cleaning easier.

WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop into a crack.

• Do not use any harsh or abrasive cleaners or sharp metal scrapers to clean the glass on the oven door, as they may scratch the surface.
  The components in the appliance door may have sharp edges.

• Wear gloves.

  1. Detach the oven door.
     “Removing the appliance door”, Page 14

  2. Position it on a cloth with its handle pointing downwards.

  3. To remove the upper cover of the oven door, press in the tabs on the left and right using your fingers.
     Pull out and remove the cover.

  4. Lift the top pane up and out.

  5. Lift the panel up and out.

Fitting the door panes
When fitting the panes, ensure that the lettering “top right” is not upside down at the bottom left.

1. Insert the pane diagonally towards the back.

2. Hold the top pane in both brackets and insert it at an angle towards the back.
   Push the pane into both openings on the underside.
   The smooth surface of the pane must face outwards.

3. Place the cover at the top of the oven door and press it on.
   The mounting brackets must lock in place on both sides.

4. Attach the oven door.
   “Attaching the appliance door”, Page 16
   Note: Only use the oven once the glass panes have been correctly fitted.

Attaching the appliance door
Reattach the oven door in the reverse sequence to removal.

WARNING ‒ Risk of injury!
The oven door might accidentally fall or a hinge may suddenly snap shut.

• In this case, do not hold onto the hinge. Call customer service.
  1. When attaching the oven door, ensure that both hinges are inserted in the opening direction.
  2. The notch on the hinge must engage on both sides.
  3. Close both locking levers again.
  4. Close the appliance door.

Additional door safety
Additional safety devices have been fitted to prevent contact with the oven doors. Always attach these safety devices when children could come near the oven. You can purchase this special accessory from after-sales service. 11023590
WARNING ‒ Risk of burns!
During long cooking times, the oven door may become very hot.

• Supervise small children when the oven is in operation.

Troubleshooting

You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.

WARNING ‒ Risk of injury!
Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• If the appliance is defective, call Customer Service.
  “Customer Service”, Page 18

WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s
  Customer Service or a similarly qualified person in order to prevent any risk.

Malfunctions

Replacing the oven light bulb
If the light in the cooking compartment fails, change the oven light bulb.

Note: Heat-resistant, 25-watt, 230 V halogen bulbs are available from the after-sales service or specialist retailers.
Only use these bulbs. Hold the new halogen bulbs only with a clean, dry towel. This increases the service life of the bulb.

WARNING ‒ Risk of burns!
The appliance and its parts that can be touched become hot during use.

• Caution should be exercised here in order to avoid touching heating elements.

• Young children under 8 years of age must be kept away from the appliance.
  WARNING ‒ Risk of electric shock!
  When changing the bulb, the bulb socket contacts are live.

• Before replacing the bulb, ensure that the appliance is switched off in order to prevent a potential electric shock.

• Also unplug the appliance from the mains or switch off the circuit breaker in the fuse box.

Requirements

• The appliance is disconnected from the power supply.

• The cooking compartment has cooled down.

• You have a new halogen bulb to replace the old one.

  1. Place a tea towel in the cooking compartment to prevent damage.

  2. Turn the glass cover anti-clockwise to remove it.

  3. Pull out the halogen bulb without turning it.

  4. Insert the new halogen bulb and press it firmly into the socket.
     Make sure the pins are positioned correctly.

  5. Depending on the appliance model, the glass cover may have a sealing ring. Attach the sealing ring.

  6. Screw in the glass cover.

  7. Remove the tea towel from the cooking compartment.

  8. Connect the appliance to the power supply.

Transportation and disposal

You can find out here how to prepare your appliance for transportation. You will also find out how to dispose of old appliances.

Disposing of old appliance
Valuable raw materials can be reused by recycling.

1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally friendly manner.

Information about current disposal methods are Mavailable from your specialist dealer or local authority.
This appliance is labelled in accordance with European Directive
2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Transporting the appliance
Keep the original appliance packaging. Only transport the appliance in the original packaging. Observe the transport arrows on the packaging.

1. Secure all moving parts in and on the appliance using adhesive tape that can be removed without leaving any traces.
2. Slide all accessories, such as baking trays, into the corresponding slots with thin cardboard at the edges, in order to avoid damaging the appliance.
3. Place cardboard or similar between the front and rear side to prevent knocks against the inside of the door glass.
4. Secure the door and, if available, the top cover to the appliance sides using adhesive tape.

If the original packaging is no longer available

1. In order to guarantee sufficient protection against any transport damage, pack the appliance in protective packaging.
2. Always transport the appliance upright.
3. Do not hold the appliance by the door handle or the connections on the rear, as these could be damaged.
4. Do not place any heavy objects on the appliance.

Customer Service
Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.

Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge.
Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website.
If you contact Customer Service, you will require the product number (E-Nr.) and the production number (FD) of your appliance.
The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

This product contains light sources from energy efficiency class G.

Product number (E-Nr.) and production number (FD)
You can find the product number (E-Nr.) and the production number (FD) on the appliance’s rating plate.
You will see the rating plate with these numbers if you open the appliance door.

Make a note of your appliance’s details and the Customer
Service telephone number to find them again quickly.

How it works

Here, you can find the ideal settings for various types of food as well as the best accessories and cookware.
These recommendations are perfectly tailored to your appliance.

Proceed as follows:

Note:
If you are using the appliance for the first time, follow this important information:

• “Safety”, Page 2

• “Saving energy”, Page 5

•  “Preventing material damage”, Page 4

  1. Select a suitable type of food from the overview of food.
     Note: If you do not find the exact food or application that you want to prepare or implement, look for a similar dish and take the general information into consideration.

  2. Remove any accessories from the cooking compartment.

  3. Select suitable cookware and accessories.
     Use the cookware and the accessory listed in the recommended settings.

  4. Only preheat the appliance if the recipe or the recommended settings tell you to do so.

  5. Use the recommended settings when configuring the appliance settings.

  6. WARNING ‒ Risk of scalding!Hot steam may escape when you open the appliance door. Steam may not be visible, depending on the temperature.

  7. Open the appliance door carefully.

  8. Keep children at a safe distance.
     When the dish is ready, switch off the appliance.

Good to know

Observe this information when preparing food.

• The temperature and cooking time depend on the amount of food and the recipe. Settings ranges are specified for this reason. Select lower values first and, if required, select higher values the next time.
  Cooking times cannot be reduced by using higher temperatures. Doing this would mean that the food would only be cooked on the outside, and would not be fully cooked in the middle.

• The setting values apply to food placed in the cooking compartment while the cooking compartment is still cold. You can cut your energy use by up to 20%.
  It is not usually necessary to preheat the appliance.If you would like to preheat the oven anyway, you can reduce the indicated baking times by a few minutes.
  Preheating is required for some types of food. Do not place accessories into the cooking compartment until it has finished preheating.

• Remove any accessories that are not being used from the cooking compartment. This allows you to achieve optimal cooking results and save up to 20%in energy.

• Hot air gentle is an intelligent type of heating that allows you to gently cook meat, fish and baked items.The appliance optimally controls the supply of energy to the cooking compartment. The food is cooked in phases using residual heat. This means that the food remains more succulent and brownsless. Depending on the preparation and food, you can save energy. If you preheat the appliance oro pen the appliance door before the food has fin-ished cooking, you may not be able to achieve thi sresult.
  The hot air gentle type of heating is used to measure both the energy consumption in circulating-air mode and the energy efficiency class.

• Only use original accessories.
  The original accessory has been tailored to the cooking compartment and the types of heating.
  Ensure that the accessory slides in the right way round.

Condensation
This section tells you how condensation is formed, how you can prevent damage, and how you can prevent condensation from forming.

When you are cooking food in the cooking compartment, a lot of steam may form in the cooking compartment. Since your appliance is extremely energy- efficient, only a small amount of heat escapes during operation. Due to the significant differences in temperature between the appliance interior and the external parts of the appliance, condensation may build up on the appliance door, the control panel or the front panels of adjacent kitchen cabinets. The formation of condensation is a normal physical phenomenon.
In order to prevent damage, wipe away the condensation.
When you preheat the appliance, you reduce the build-up of condensation.

Greaseproof paper
Only use greaseproof paper that is suitable for the selected temperature. Always cut the greaseproof paper to size.WARNING ‒ Risk of fire!
Opening the appliance door creates a draught.Greaseproof paper may come into contact with the heating element and catch fire.

• Never place greaseproof paper loosely over accessories when preheating the appliance and while cooking.
• Always cut greaseproof paper to size and use a plate or baking tin to hold it down.

Notes on baking
When baking, use the shelf positions indicated.

Notes

• When baking on several layers, use hot air. Different food that is placed in the oven at the same time will not necessarily be ready at the same time.
  In such cases, you can remove the cooked food and continue to cook the other baking tray. If necessary, you can change the position and direction of the baking trays.

• Position baking tins/dishes either next to one another or offset on different shelves so that they are not directly one above the other in the cooking compartment. You can cut energy use by cooking different items at the same time.

• For best results, we recommend using dark-colored metal baking tins.

Roasting and grilling on the wire rack
Roasting on the wire rack works particularly well for large poultry or for multiple pieces at the same time.

• Depending on the size and type of the food to be roasted, add up to 1/2 litre water to the universal pan.
  You can make a sauce from the juices that are collected. This also means that less smoke is produced and the cooking compartment does not become as dirty.

• Keep the appliance door closed when using the grill.
  Never grill with the appliance door open.

• Place the food to be grilled on the wire rack. In addition, slide the universal pan in at least one shelf position lower, with the slanted edge facing the appliance door. This means that any dripping fat is caught.

Roasting in cookware
If you cook food in cookware, you can remove it from the cooking compartment more easily and serve it directly in the cookware. If you cover the cookware when you cook your food, this will keep the cooking compartment cleaner.

General information about roasting in cookware

• Use heat-resistant, ovenproof cookware.
• Place the cookware onto the wire rack.
• Check in advance whether the cookware fits in the cooking compartment.
• Glass cookware is best.
• Shiny roasting dishes made from stainless steel or aluminium are not ideal. They reflect the heat like amir or. The food cooks more slowly and does not grow as well. Increase the temperature accordingly and extend the cooking time.
• Follow the manufacturer’s instructions for your roasting dishes.

Cookware without lid

• Use a deep roasting dish.
• Place the cookware onto the wire rack.
• If you do not have any suitable cookware, use the universal pan.

Cookware with lid

• Use a suitable lid that seals well.
• Place the cookware onto the wire rack.
• Meat, poultry and fish can also become crispy in a covered roasting dish. Use a roasting dish with a glass lid for this. Select a higher temperature.

WARNING ‒ Risk of injury!
If hot glass cookware is placed on a wet or cold surface, the glass may shatter.

• Place hot glass ovenware on a dry mat after cooking.

WARNING ‒ Risk of scalding!
Very hot steam may escape when the lid is opened after cooking. Steam may not be visible, depending on the temperature.

• Lift the lid in such a way that the hot steam can escape away from you.
• Keep children away from the appliance.
  Notes on roasting and grilling
  The setting values are based on the assumption that unstuffed, chilled, ready- to-roast poultry, meat or fish is placed into a cold cooking compartment.

ATTENTION!
Acidic food may damage the grid

• Do not place acidic food, such as fruit or food with an acidic marinade directly on the pan support.
• The larger the poultry, meat or fish, the lower the temperature and the longer the cooking time.
• Turn the poultry, meat or fish after approx. 1/2 to2/3 of the time listed.
• Add a little liquid to the poultry in the cookware.Cover the base of the cookware with approx. 1–2 cm of liquid.
• When you turn poultry, ensure that the breast sideor skin side is underneath to begin with.
• Use tongs to turn the pieces of food you are grilling.If you pierce the meat with a fork, the juices will run out and it will become dry.
• Only add salt to steaks once they have been grilled.Salt draws water from the meat.
• Set the cooking time (e.g. 20 + 35): For 500 gmeat, calculate 20 minutes plus 35 minutes baking time with additional time. For 1.5 kg, the cooking time would therefore be 95 minutes.
• Cooking time range (e.g. 10–15): Your food will be ready within the specified range of time.

Information for those allergic to nickel
In rare cases, small amounts of nickel may pass into the food.

Tips for roasting and braising
Use these tips for good results when roasting and braising.

Tips for keeping acrylamide levels to a minimum when cooking
Acrylamide is harmful to your health and is produced when you cook cereal and potato products at very high temperatures.

List of foods
Recommended settings for a variety of foods, sorted in to food categories.

Cakes and other baked goods
Recommended settings for cakes and baked items

The temperature and baking time depend on the quantity and consistency of the dough. This is why temperature ranges are given in the tables. Set a short cooking time first. If required, set a longer cooking time next time. A lower temperature results in more even browning.

Baking tips
We have compiled a few tips to help you achieve a good baking result.

Tips for next time you bake
If something goes wrong when baking, you can findsome tips here.

Bread and bread rolls
The values for bread dough apply to both dough placed on a tray and dough placed in a loaf tin.

ATTENTION!
When the cooking compartment is hot, any water inside it will create steam. The change in temperature may cause damage.

• Never pour water into the cooking compartment when it is still hot.
• Never place cookware containing water on the cooking compartment floor.

Recommended settings

Baking on one level

Baking on multiple levels
Cooking on multiple levels

Poultry, meat and fish
The table lists values for poultry, meat and fish, with default values for the weight.
If you prepare dishes that are larger or heavier than what is specified in the recommended settings, always use the lower temperature. If cooking more than one item, use the weight of the heaviest item as a basis for determining the cooking time. The individual pieces must be approximately the same size.

Tips for poultry, meat and fish
Observe the instructions when preparing poultry, meat and fish

Poultry

• For duck or goose, pierce the skin on the underside of the wings. This allows the fat to drain out.
• If using duck breast, score the skin. Do not turn duck breasts.
• Poultry will turn out particularly crispy and brown if you baste it towards the end of the roasting time with butter, salted water or orange juice.

Meat

• Coat lean meat with fat as required, or separate the pieces.
• When roasting, add a little liquid if the meat is lean.
• Cover the base of the glass cookware with approx. 1/2 cm of liquid.
• Score the rind crosswise. If you turn the joint when cooking it, ensure that the rind is underneath to begin with.
• When the joint is ready, turn off the oven and allow it to rest for a further 10 minutes in the cooking compartment, keeping the door closed. This helps distribute the meat juices more evenly. Wrap the joint in aluminium foil if necessary. The resting time is not included in the specified cooking time.
• It is more convenient to roast and braise meat in the cookware. You can take the joint out of the cooking compartment more easily in the cookware, and prepare the sauce in the cookware itself.
• The quantity of liquid depends on the type of meat, the material the cookware is made from and on whether or not a lid is used. If you are cooking meat in an enamelled or dark-coloured metal roasting dish, it will need a little more liquid than if cooked in glass cookware.
• The liquid in the cookware evaporates as the meat roasts. Carefully pour in more hot liquid if required.
• The distance between the meat and the lid must be at least 3 cm. The meat may expand.
• To braise the meat, sear it first as required. Add water,wine, vinegar or similar for the braising liquid.
• The base of the cookware must be covered with 1–2 cm of liquid.

Fish

• You do not need to turn whole fish.
• Place the whole fish into the cooking compartment in swimming position with the dorsal fin facing upwards.
• Placing half a potato or a small ovenproof container in the stomach cavity of the fish provides stability.
• You can tell when the fish is cooked because the dorsal fin can be removed easily.
• When stewing, add two to three tablespoons of liquid and a little lemon juice or vinegar into the cookware.

Recommended settings

Grilling

Roasting

Tips for next time you roast
If roasting is not successful the first time, you can find some tips here.

Preprepared products

• Observe the instructions on the packaging.
• If you line the accessories with greaseproof paper, make sure that the paper is suitable for these temperatures.
• Make sure the paper is a suitable size for the dish to be cooked.
• The cooking result greatly depends on the quality of the food. Pre-browning and unevenness can sometimes even be found on the raw product.
• Leave a little space between bread rolls when crisping them up. Do not place too many bread rolls on the accessories.
• Sprinkle grated cheese over the top of your lasagne to give it a beautiful and evenly browned finish.

Preprepared products

Yoghurt
You can also use your appliance to make your own yoghurt.

Making yoghurt

1. Remove the accessories and shelves from the cooking compartment.
2. Heat 1 litre of milk (3.5% fat) to 90 °C on the hob and then leave it to cool down to 40 °C. Only heat UHT milk to 40 °C.
3. Stir 30 g yoghurt into the milk.
4. Pour the mixture into small containers, e.g. small jars with lids.
5. Cover the containers with film, e.g. cling film.
6. Place the containers on the cooking compartment floor.
7. Use the recommended settings when configuring the appliance settings.
8. After making the yoghurt, leave it to cool in the refrigerator.

Recommended settings

Yoghurt

Special cooking methods and other applications
Information and recommended settings for special cooking methods and other applications, e.g. slow cooking or preserving.

Drying
You can achieve outstanding drying results for the food using hot air. With this type of preserving, flavours are concentrated as a result of the dehydration.
The temperature and drying time depend on the type, moistness, ripeness and thickness of the food. The longer you leave the food to be dried, the better it will be preserved. The thinner you cut the slices, the quicker the drying process will be and the more flavour the dried food will retain. Settings ranges are specified for this reason.

Preparation for drying

1. Only use unblemished, fresh fruit, vegetables and herbs and wash them thoroughly. Line the wire rack with greaseproof paper or parchment paper. Drain the excess water from the fruit and then dry it.

2. If required, cut the fruit into thin pieces or slices of equal size. Place unpeeled fruit onto the dish with the sliced surfaces facing upwards.
   Ensure that neither fruit nor mushrooms overlap on the wire rack.

3. Grate vegetables and then blanch them. Drain the excess water from the blanched vegetables and spread them evenly on the wire rack.

4. Dry herbs on the stem. Spread the herbs out evenly and slightly heaped on the wire rack.

5. Turn very juicy fruit and vegetables several times.
   After drying, remove the dried fruit and vegetables from the paper immediately.

Drying
The table contains settings for drying various foodstuffs. If you want to dry food that is not listed in the table, you should use similar foodstuffs in the table as a reference.

Note:
Use the following shelf positions for drying:

• 1 wire rack: Shelf position 3
• 2 wire racks: Shelf positions 3 + 1

Proving dough
You can prove yeast dough more quickly in your appliance than at room temperature.

Proving dough
Always allow yeast dough to prove in two steps: Once in its entirety (dough fermentation) and a second time in the baking tin (final fermentation).

1. Place the dough into a heat-resistant bowl.

2. Place the bowl on the wire rack.

3. Use the recommended settings when configuring the appliance settings.
   Only start operation when the cooking compartment has fully cooled down.

4. Do not open the appliance door while the dough is proving, otherwise moisture will escape.

5. Continue processing the dough and mould it into the final shape for baking.

6. Place the dough into the cooking compartment at the specified shelf position.
   Tip: If you want to preheat the oven, do not carry out the final proving stage in the appliance.

Proving dough
The temperature and time are dependent on the type and quantity of the ingredients. The values in the table are therefore guide values only.

Defrosting
For defrosting frozen fruit, vegetables and baked items.
Poultry, meat and fish should ideally be defrosted in the refrigerator. Not suitable for cream cakes or cream gateaux.
When defrosting food, use the following shelf positions:

• 1 wire rack: Shelf position 2
• 2 wire racks: Shelf positions 3+1

Note: Food that is frozen in thin layers or small portions defrosts more quickly than food frozen in larger blocks.

• Take the food out of its packaging and place in a suitable dish on the wire rack.
• Redistribute the food or turn it once or twice as it defrosts. Turn large pieces of food several times. As the food defrosts, break up any clumps and remove items that have already defrosted from the appliance.
• To allow the temperature to equalise, leave the defrosted food to rest for another 10 to 30 minutes in the appliance after switching it off.

Defrosting

Test dishes
These overviews have been produced for test institutes to facilitate appliance testing in accordance with EN 60350-1.

Baking
Please take note of the following information if you are baking test dishes.

General information

• The setting values apply to food placed in the cooking compartment while the cooking compartment is still cold.

• Observe the notes about preheating in the tables.
  These setting values assume that the rapid heating function is not being used.

• When baking, use the lower of the listed temperatures to begin with.

Shelf positions
Shelf positions for baking on one level:

• Universal pan/baking tray: Shelf position 3
• Baking tins on the wire rack: Shelf position 2

Note: Items that are placed in the oven on baking trays or in baking tins/dishes at the same time will not necessarily be ready at the same time.
Shelf positions for baking on two levels:

• Universal pan: Shelf position 3
  Baking tray: Shelf position 1

• Baking tins on the wire rack:
  First wire rack: Shelf position 3
  Second wire rack: Shelf position 1
  Shelf positions for baking on three levels:

• Baking tray: Shelf position 5
  Universal pan: Shelf position 3
  Baking tray: Shelf position 1
  Baking with two springform cake tins:
  If you can use your appliance to cook on multiple levels, position baking tins either next to one another or offset on different shelves so that they are not directly one above the other in the cooking compartment.

Baking

Grilling

Installation instructions

Observe this information when installing the appliance.

Important information
This appliance is designed for use up to a maximum height of 4000 metres above sea level. Do not use the door handle to transport or install the appliance. The appliance must be disconnected from the power supply whenever installation work is being carried out.

• Only an appliance which has been correctly installed in accordance with these installation instructions can be used safely. The installer shall be liable for damages incurred as a result of incorrect installation.

• Check the appliance for damage after unpacking it.
  Do not connect the appliance if it has been damaged in transport.

• Proceed in accordance with the installation sheets for installing accessories.

• Before starting up the appliance, remove any packaging material and adhesive film from the cooking compartment and the door.

• Fitted units must be heat-resistant up to 90 °C, and adjacent unit fronts up to 70 °C.

• Do not install the appliance behind a decorative door or the door of a kitchen unit. Risk of overheating.

• Cut-out work on the units should be carried out before installing the appliance. Remove any shavings.
  Otherwise, the correct operation of electrical components may be adversely affected.

• To prevent cuts, wear protective gloves. Parts that are accessible during installation may have sharp edges.

• Dimensions of the figures in mm

Appliance dimensions
You can find the appliance dimensions here.

• The mains socket for the appliance must either be located in the hatched area A or outside of the area where the appliance is installed.
• Secure freestanding units to the wall using a standard bracket B.

Installing the appliance below a worktop

• To ventilate the appliance, the intermediate floor must have a ventilation cut-out.
• Secure the worktop to the built-in unit.
• Observe the installation instructions for the hob.

Installation in a tall unit

• To ventilate the appliance, the intermediate floor must have a ventilation cut-out.
• If the tall unit has another back panel in addition to the element back panels, remove this.
• Only fit the appliance up to a height which allows accessories to be easily removed.

Corner installation

Observe the minimum dimensions in a corner installation in order to be able to open the cover of the appliance. The dimension depends on the thickness of the furniture panel and the handle.

Electrical connection
In order to safely connect the appliance to the electrical system, follow these instructions.

• Before using the appliance for the first time, you must ensure that your domestic power supply is earthed and complies with the effective safety requirements.
  The installation of the appliance must be carried out by a qualified technician. Observe the provisions of the local electricity supply company and the general laws. In rare cases, a missing productive  conductor or incorrect installation may leadto material damage or serious injuries, such as death or injury caused by electric shock. The manufacturer accepts no responsibility for personal injuries or damage to the appliance due to faulty or incorrect electrical connection.

• The appliance must always be disconnected from the power supply when installation work is being carried out.

• The appliance fulfils the requirements of protection class I and must only be connected to an earthed mains socket.

• The H05 V V-F 3G mains connection cable must be at least 1.5 mm². The yellow-green conductor must be connected first and be slightly longer than the two other wires on the appliance side.

• In accordance with safety regulations, an all-pole separator with at least a 3 mm contact opening must be provided. A separator is not required during connection, which is carried out via an earthed power socket that is easily accessible at all times.

• Contact protection must be guaranteed during installation.

• Determine the phase conductor and neutral conductor (zero conductor) in the socket. The appliance may be damaged if it is not connected correctly.

• Connect the oven in accordance with the specifications on the rating plate.

• Place the appliance in front of the surround unit to connect it. The connection cable must be long enough. Caution: During the installation, ensure that the power cord is not jammed and does not come into contact with hot appliance parts.

• All work on the appliance, including replacing the cabling, must only be carried out by the after-sales service.

Important information about the electrical connection
Note the following information and ensure that:

WARNING ‒ Risk of electric shock!
There is a risk of electric shock if you touch live components.

• Hold the mains plug with dry hands only.
• Never pull out the mains plug from the socket while the appliance is in operation.
• Pull out the power cable directly at the plug and never by pulling the power cable as this may become damaged.
  • Fit the mains plug and socket together.
  • The mains plug can be accessed at all times.
  • The cross section of the cable is sufficient.
  • The mains cable is not kinked, crushed, modified or severed.
  • If required, the mains cable must only be replaced by a qualified electrician. A replacement mains cable is available from the after-sales service.
  • Do not use any multiple plugs or multi-connectors and extension cords.
  • The earthing system is correctly installed.
  • If using a residual current device, only use one that bears the mark . The presence of this mark is the only way to be sure that it fulfils all the applicable regulations.
  • The mains cable does not come into contact with heat sources.

Power cable with protective contact plug

Connect the appliance only to a correctly installed, earthed socket.
If the plug can no longer be accessed following installation, provide a separator in the phases in the fixed electrical installation in accordance with the set-up instructions.

Power cable without protective contact plug
Only allow a licensed professional to connect the appliance.
Provide a separator in the phases in the fixed electrical installation in accordance with the construction instructions.
Identify the phase conductor and the neutral conductor (zero conductor) in the socket. An incorrect connection may damage the appliance.
Only connect in accordance with the connection diagram.
The information about the voltage can be found on the rating plate. Connect the wires of the mains power cable according to the colour coding:

Securing the appliance

• Slide the appliance in fully and centre it.
• Screw the appliance into place.

The gap between the worktop and the appliance must not be closed by additional battens.
Do not attach any thermal insulation strips to the side panels of the surround unit.

To remove:

• Disconnect the appliance from the power supply.
• Undo the fastening screws.
• Lift the appliance slightly and pull it out completely.

Thank you for buying a Bosch Home Appliance

Register your new device on MyBosch now and profit directly from:

• Expert tips & tricks for your appliance
• Warranty extension options
• Discounts for accessories & spare parts
• Digital manual and all appliance data at hand
• Easy access to Bosch Home Appliances Service

Free and easy registration – also on mobile phones: www.bosch- home.com/welcome

Looking for help?
You’ll find it here.

Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts.
Find out everything about the many ways Bosch can support you: www.bosch- home.com/service
Contact data of all countries are listed in the attached service directory.

BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
www.bosch-home.com
A Bosch Company

Valid within Great Britain:
Imported to Great Britain by
BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton, Milton Keynes
MK12 5PT
United Kingdom

References

• Home Appliances Global Website | Bosch
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>