Dongguan Speedtek Electronic Co Ltd TW03 Desk Lamp with Wireless Charger User Manual
- June 13, 2024
- Dongguan Speedtek Electronic Co Ltd
Table of Contents
Dongguan Speedtek Electronic Co Ltd TW03 Desk Lamp with Wireless Charger
Product Information:
The Desk Lamp with Wireless Charger is a versatile and convenient lighting solution that combines a desk lamp with a wireless charging pad. It is designed to provide ample lighting for your workspace while also allowing you to charge compatible devices wirelessly.
The product meets the FCC standards and regulations, ensuring its compliance with electromagnetic interference rules.
For any inquiries or assistance, you can contact us by clicking on your Amazon order and sending us an email.
Product Usage Instructions
- Use only the original accessories provided with the product to ensure optimal performance and compatibility.
- Ensure the product is placed on a stable surface to prevent any accidents or damage.
- Make sure to connect the lamp to a power source using the included power adapter.
- Adjust the lamp’s position and angle according to your preference by utilizing the adjustable arm and head.
- To use the wireless charging feature, ensure that your device supports wireless charging and is compatible with the lamp’s charging pad.
- Place your compatible device on the wireless charging pad, aligning it with the marked area for optimal charging efficiency.
- Avoid exposing the product to water or other liquids to prevent electrical shock or damage.
- Do not disassemble or modify the product as it may void the warranty and pose safety hazards.
- Keep the lamp away from flammable materials and direct sunlight to prevent fire hazards.
- When not in use, turn off the lamp and unplug it from the power source to conserve energy and prolong its lifespan.
Specification
Attention
- The original accessories are advised to use only.
- Keep away from the fire source.
- Cleaning and Maintenance: only clean it by water, moistened with water, do not use chemistry product or abrasive, unplug the power cord if you do not use it for a long time.
- Don’t stare directly at the light source.
- Keep away from rain and wet conditions.
- Avoid using the power plug with wet hands to prevent electric shock.7.
- Please contact a professional for repair if the product doesn’t work. 8.
- Do not try to disassemble it by yourself.
- LED bulbs are not replaceable.
How to Use
-
Unpack and check it if it’s in good condition.
-
Power On/Off
Connect the lamp to the wall outlet using the provided accessories, short- touch the power button to turn on/off the lamp. -
Color Temperature Adjustment
Short-touch the button to change the color temperature(warm white, neutral white, cold white). -
Brightness Control
Short-touch the button for changing 5 levels brightness(20%, 40%, 60%, 80%, 100%). Long-touch the button to fine tune the brightness. -
30/60-Minute Timer
Short-touch the timer button, the lamp flashes 1 time then it will automatically turn off after 30 minutes, long-touch the timer button, the lamp flashes 2 times then it will automatically turn off after 60 minutes. -
Wireless Charger
Please charge your phone in landscape orientation, it starts to charge a few seconds later. Kindly note: Ensure your phone supports the wireless charger function, wireless charging is generally slower than traditional wired charging.
Notes
- Warranty: 12-month warranty and 60-day full refund for any quality issues.
- Damage caused by neglect of this manual is not covered by this warranty.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, Human proximity to the antenna shall not
be less than 20cm (8 inches)during normal operation.
That changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Contact Us
You can also click on your order on Amazon and send us an email.