KICA Jet Fan 2 Air Duster Instructions
- June 13, 2024
- KiCA
Table of Contents
KICA Jet Fan 2 Air Duster
Product Information
The product is a handheld air blower with multiple speed settings and intelligent protection features. It has an air outlet, suction port, speed control button, power button, charging port, heat dissipation holes, large nozzle, small nozzle, and comes with a USB-C cable for charging. The product is available in multiple languages: English, German, French, Spanish, Italian, Portuguese, Russian, Japanese, Korean, and Polish.
Product Usage Instructions
- Blowing dust: Use the product directly to blow away dust.
- Power ON / OFF: Long press the power button to turn the product on or off. Single tap the power button after turning it on to enter standby mode, and tap again to restart.
- Speed control: Slide the speed control button to adjust the wind speed. There are two speed options: high speed and low speed.
- Indicator: The indicator provides information about the product’s status:
- Constant green light: Indicates the product is powered on.
- Red light flashes slowly: Indicates the product needs recharging.
- Red light flashes quickly then turns off: Indicates low power or malfunction warning. The product will automatically power off in this case.
- Constant red light: Indicates the product is currently charging.
- Constant green light: Indicates the charging process is completed.
- Intelligent protection: The product has built-in intelligent protection features:
- The product runs for 5 minutes after turning on and then enters auto pause mode.
- If there is no operation for 3 minutes during auto pause mode, the product will automatically power off.
- Using the small nozzle with high speed for 30 seconds will cause the product to automatically reduce revolution speed to avoid overheating. Rebooting the device cancels this protection.
- In pause mode, tap the power button to restart the product.
- Charging: The product can be charged using a USB-C cable. The recommended charging specification is 5V — 1A.
- Specifications: Please read and follow the safety guidelines mentioned in the user manual. The product is not waterproof, so do not use any liquid cleansers. Only use a soft dry cloth to clean it. Avoid pressing, rubbing, or piercing the air inlet and outlet with sharp objects to prevent damage to the product. Do not over-charge or over-discharge the battery.
Instructions
Overview
- Air outlet
- Suction port
- Speed control button
- Indicator
- Power button
- Charging port
- Heat dissipation holes
- Large nozzle
- Small nozzle
- USB-C cable
Start to Use
Blowing dust
Power ON / OFF
- Long press the power button to power on / off.
- Single tap the power button after power on to enter standby mode, tap again to restart.
Never block the suction port, air outlet and heat dissipation holes while using or the product might be damaged.
Speed control
Slide the speed control button to adjust the wind speed.
Indicator
Intelligent protection
When in pause mode, tap the power button to restart. 
Charging
Specifications
- Product name: KiCA Jet Fan 2
- Model : KiCAAM02
- Operating voltage range: 12.8V~16.8V
- Operating temperature range: 0℃ ~+40℃
- Storage temperature range: – 20℃ ~+60℃
- Battery capacity: 1100mAh
- Charging time : About 3H 30min (5V/1A)
- Weight : About 302g
- Size : 71.9×37.4×128.9mm
- Max. revolution speed : 101,000±10% r/min (Reference value)
- Max. runtime : About 3H 30min (Test in lab environment under the low speed)
Packing list:
- Main body×1,
- Large nozzle×1,
- Small nozzle×1,
- USB-C cable×1,
- Manual×1
Cautions:
Please read and save this quick start guide carefully. To reduce the risk of
fire, serious injury, and property damage, observe the following safety
guidelines when using:
- DO NOT use it when your hands are wet.
- DO NOT allow the product to come into contact with any kind of liquid. DO NOT leave the product out in the rain or near a source of moisture. DO NOT drop the product into water.
- Never block the air openings of the machine while using.
- Never drop or insert any objects into any openings.
- DO NOT leave it near heat sources such as a furnace or heater. DO NOT leave the product inside of a vehicle on hot days.
- DO NOT use it where flammable items are being used (like gas, spray and so on), or it might cause fire or explosion.
- Damage may be caused to it if dropped or subject to external force. Never operate the product if it is not working properly, or if it has been dropped or damaged. Return it to a service center for examination and repair.
- Do not pull, wrap, squeeze or modify the charging cable. Never use a damaged charging cable.
- If you can hear abnormal sound, smell something unusual while using, or the product is overheat, or blades work abnormally, please stop use it immediately.
- Never disassemble the product in any way or it may cause damage. If you accidentally disassemble it and it is not working properly, please return it to a service center for examination and repair.
Usage and storage:
- The air from the product’s blowing port is cold. While using the product, keep hair away from the air inlet and outlet.
- Do not direct air toward eyes, ears, mouth or other sensitive areas.
- The product should never be left unattended after powered on.
- Keep the product out of the reach of children and pets.
- Do not place or store the product where it can fall or be pulled into a tub or sink.
- Never use the product when the temperature is too high or too low.
- When not in use, the product should be stored in a well ventilated and dry location, and avoid direct sunlight.
Maintenance
- This product is not waterproof. DO NOT use any liquid cleansers (Alcohol, washing water, detergent and so on). Only use a soft dry cloth to clean it.
- Please regularly remove the attachments on the air inlet and outlet.
- DO NOT use nail or any sharp object to press, rub or pierce the air inlet and outlet to avoid damage to the product.
- DO NOT over-charge or over-discharge the battery, which will damage the battery.
Precautions when discarding the product:
The lithium ion battery used by the product is a recyclable and renewable
valuable resource. When discarding it, please have it handled by a
professional agency that can recycle rechargeable batteries. Before discarding
the product, power it off and take the lithium ion battery out from it
following the steps below. The battery is to be disposed of safely.
Steps:
- Disassemble the top housing with help of a professional tool.
- Pull out the battery terminals from the PCBA.
- Use a professional cutter to cut off the bottom housing and then take out the battery.
Find More Features
- Website
- Youtube
This document is subject to change without notice.
Guilin Feiyu Technology Incorporated Company
- www.kica-tech.com
- [email protected]
- Tel +86 773-2320865