KICA Pro Double Head Massage Gun Device Instructions

Double Head Massage Gun Device
Instruction Manual

Overview

1. Flat head (Non-removable)
2. Trigger button
3. Touch screen
4. Power button
5. Charging port
6. Battery indicator

|
---|---
Flat Head:
Massage flat major muscle groups on the back.| Gentle Head:
Promote the absorption of essential oil.
|
Spherical Head:
Relax soft tissues and sensitive muscles.| U-shaped Head:
Massage neck (not cervical vertebrae) and tendon.

Start to Use

1. Massage Head Combination
   The device can be used directly with the built-in massage head (two flat head) on it, or combine with another one depending on your needs. See complete combination as below.
   

2. Power ON / Start running / Power Off
   Power ON: Long press the power button until hear the tone.

Start running:
Method one: Single tap trigger button to start running, single tap again to stop. Method two: Operate on the touch screen to select the modes and gears.

Do not touch the middle and the back of the two massage heads while the product is running to avoid injuries.

Power Off:
Long press the power button until hear the tone to power off.
If there is no operation within 10 minutes, it will power off automatically.

Touch screen
Operate on the touch screen to select the modes and gears.

1. Battery level
2. Current rotation speed
3. Massage time for this time
4. Total massage time for current mode
5. Current gear (1-10)
6. Current mode
7. Current pressure

Diagram:

Basic massage modes

Locked Motor Protection

Do not press the massage head firmly to block the motor rotation while using, otherwise it will reduce the service life of the product!
This product has locked motor protection function. If the rotation is blocked for 3 seconds, it will stop running automatically after a beep sound.
Single tap the trigger button to start again.

Intelligent Protection

This product has intelligent protection function. After working for 10 minutes continuously, a beep sound will be issued, and the product will stop running automatically.
Single tap the trigger button to start again.

Charging

Do not use it while charging.
The battery indicator is red while charging, and it will turn green after charging completed. Screen shows the charging icon.
When the product is on, it will return to the interface before charging, after unplug the power supply while charging.

Specifications

Product Name: KiCA Pro Massage Device
Product Model: A3D
Operating Voltage Range: 10.8V~12.6V
Operating Temperature Range: 0℃ ~+40℃
Charging Temperature Range: 0℃ ~+40℃
Battery Capacity: 2200mAh
Charging Time: About 4.5 hours
Weight: About 630g
Size: 97.2×46×188.3mm
Theoretical Battery Life: About 20 hours (Test in lab environment under the 1st gear with flat head)

List

FCC regulatory conformance:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device  must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to  try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s  authority to operate the equipment.

Warranty Card

Product Model|
---|---
Serial Number|
Purchase Date|
Customer Name|
Customer Tel|
Customer Email|

Warranty:

1. Within one year from the date of selling, the product is malfunctioning under normal due to non-artificial reasons.
2. The malfunction of the product is not caused by artificial reasons such as unauthorized disassemble or conversion or addition.
3. The buyer is able to provide the certificate of maintenance service: the warranty card, the legitimate receipts, invoices, or screenshot of purchasing.

The followings cases are not included under the warranty:

1. Unable to provide legitimate receipt and warranty card with buyer’s info.
2. The damage caused by human or irresistible factor.
   More details about after-sales policy, please refer to after-sales page on website: https://www.kica-tech.com/en/support

• Our company reserves the right of final interpretation on the above-mentioned after sales terms and limitations.

Find More Features

https://www.kica-tech.com/en| https://www.youtube.com/channel/UC3xqanbZBN7D88bTDpVi9Ig| https://www.facebook.com/GetKica/

This document is subject to change without notice.
Manufactured by: Guilin Feiyu Technology Incorporated Company

References

• 售后服务-KiCA
• After-sales service-KiCA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>