ROLINE RGS-1008M-E Gigabit Ethernet Switch User Manual
- June 13, 2024
- ROLINE
Table of Contents
ROLINE RGS-1008M-E Gigabit Ethernet Switch User Manual
Features
- Provides 8 10/100/1000Mbps Gigabit Ethernet ports
- All 10/100/1000M ports support auto-negotiation and auto-MDI/MDI-X detection
- Supports full/half-duplex transfer mode for 10/100Mbps
- Supports full-duplex transfer mode for 1000Mbps
- Supports IEEE 802.3x flow control
- Store-and-Forward switching method
- Wire-speed packet filtering and forwarding rate
- Supports jumbo frame up to 9K bytes
- Supports IEEE 802.3az Energy Efficient Ethernet and Ethernet Green
- Supports 802.1p QoS classification.
LED Indicators
Power LED
Green: Power is on
Off: Power is off
LEDs (Link/Act):
Off: port disconnected or link fail
Green on: 10/100/1000Mbps connected
Blinking: sending or receiving data
Rear Panel
QoS
Each received packet is examined and classified into one of eight priority classes, and use User Tag priority value in the received IEEE 802.1Q packet to map to one priority class.
The egress port policy as follows:
Priority value | Weight | |
---|---|---|
0 | lowest | 1 |
1 | 2 |
2
3| 4
4
5
6| 8
7| highest
Technical Specifications
Hardware
Standard| IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,IEEE 802.3ab
1000Base-T, IEEE 802.3x Flow Control, IEEE 802.3az EEE
Network Ports| 8 10/100/1000Mbps Gigabit copper portsShielded RJ-45,
auto-negotiation, auto-MDI/MDI-X support
Network Cables| Cat. 5, 5e, 6 or higher up to 100m
MAC Address Table| 4K entries
Buffer Memory| 1.5M bits
Dimension| 155 x 85 x 26mm (W x D x H)
Power Input| +5V via external power adapter
Temperature| Operating: 0° ~ 40°C, Storage: -20° ~ 70°C
Humidity| 10% ~ 90% (non-condensing)
The information contained in this document is subject to change without prior
notice.
Copyright © All Rights Reserved.