ecler IW103 In Wall High End Loudspeaker User Manual
- June 13, 2024
- ecler
Table of Contents
IW103
CEILING LOUDSPEAKERS
In-ceiling / In-wall High-end Loudspeaker
USER MANUAL
IMPORTANT REMARK
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING (If applicable): The terminals marked with symbol of “ ” may be
of sufficient magnitude to constitute a risk of electric shock. The external
wiring connected to the terminals requires installation by an instructed
person or the use of ready-made leads or cords.
WARNING: To prevent fire or shock hazard, do not expose this equipment to
rain or moisture.
WARNING: An apparatus with Class I construction shall be connected to a
mains socket-outlet with a protective earthing connection.
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug the apparatus during lightening sorts or when unused for long periods of time.
- Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Disconnecting from mains: When switching off the POWER switch, all the functions and light indicators of the unit will be stopped, but fully disconnecting the device from mains is done by unplugging the power cable from the mains input socket. For this reason, it always shall remain easily accessible.
- Equipment is connected to a socket-outlet with earthing connection by means of a power cord.
- The marking information is located at the bottom of the unit.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
**WARNING: This product must not be discarded, under any circumstance,
as unsorted urban waste. Take to the nearest electrical and electronic waste
treatment centre.
NEEC AUDIO BARCELONA, S.L**. accepts no liability for any damage that may
be caused to people, animal or objects due to failure to comply with the
warnings above.
IMPORTANT NOTE
Thank you for choosing our Ecler In ceiling / In-wall High-end Loudspeaker
IW103!
It is VERY IMPORTANT to carefully read this manual and to fully understand its
contents before any connection in order to maximize your use and get the best
performance from this equipment.
To ensure optimal operation of this device, we strongly recommend that its
maintenance be carried out by our authorised Technical Services.
All ECLER products are covered by warranty, please refer to
www.ecler.com or the warranty card included with this
product for the period of validity and conditions.
INTRODUCTION
The IW103 loudspeaker for installation in the wall or ECLER ceiling,
incorporates a careful selection of components, in an easy-to-use design to
make installation swift. It also offers excellent sound reproduction in bass
and treble thanks to its one-way system,
a full-range 3” transducer.
The transformer housed inside makes it possible to use the unit intuitively on
line with 100V/70V, simply by changing the position of the terminals.
The discrete rectangular design as well as the ease and speed of installation
make the IW103 the ideal option for a wide range of applications and
architectonic environments.
MAIN CHARACTERISTICS:
- Wall or false ceiling fitting Loudspeaker
- 3” woofer
- Connections for 15W/30W @ 100V spring-loaded terminal input connectors
- Sensitivity (1W/1m): 84 dB SPL
- Available in white (RAL 9003)
- Installation system: 2 points with rotating flange
Note: in the event of using in installations at 70V, the corresponding
power ratings for the 100V position will be reduced to half those indicated on
the switchboard. In the event of installations at 50V, it will be reduced to a
quarter.
Model IW103 incorporates a detachable protective grille. Take care not to
damage the loudspeaker when extracting the grille.
CONNECTING
The connection terminals are the crimp connector type for stripped wire. In areas where a low sound level is needed, use the terminals COM and 15W to connect the loudspeaker; while in areas where a higher sound level is required, use the terminals COM and 30W. At all times, respect the polarity.
Note: If the system is accidentally connected at low impedance 8Ω, this
will not cause any damage to the loudspeaker, but it will reduce its
performance considerably below its capabilities.
It is easy to install each unit with the 2 rotating flanges included. For
further details on the method of installing, please consult the section
INSTALLATION in this manual.
INSTALLATION
To correctly install this product, it is essential to first make a rectangular
hole in the place where it is to be fitted, allowing for the relevant wiring
for each unit.
See below for details of the steps to follow for correct installation:
- Remove the protective grille from the unit.
- Make a rectangular hole in the false ceiling or wall. The dimensions needed for this hole are 147×95 mm.
- Connect the existing wires into the installation with the unit using the crimp connectors.
- Insert the loudspeaker into the hole. Hold the unit with one hand and insert it into position, ensuring that the 2 rotating flanges lie at a tangent to the cut.
- Tighten the 2 screws accessible from the front part of the unit. The loudspeaker will then be fixed into its final position.
- Place the protective grille.
TECHNICAL SPECIFICATIONS
IW103
System
| Effective frequency range1 | 83 Hz-20 kHz (-10dB) |
|---|---|
| Coverage angle2 | 158°x158° (HxV) |
| Power handling | 30 W RMS / 120 W Peak |
| Sensitivity3 | 84 dB (1W/1m) |
| Maximum SPL4 | 99 dB continuous / 105 dB peak |
| Power options | 100V: 30W / 15W |
| Recommended amplifier power | 60 W RMS |
Transducers
| Ways | 1 |
|---|---|
| Driver | 3″ woofer |
| Nominal impedance | 667Ω / 333Ω |
Physical
| Connection type | Spring terminals |
|---|---|
| Power type selector | Changing the position of the terminals |
| Installation options | Wall or false ceiling |
| Enclosure material[ | ABS |
| Grille material | Aluminium, paintable |
| Finished color | White (RAL 9003) |
| Recommended cut out diameter | 147 x 95 mm / 5.79″x3.74″ |
| Required depth | 80 mm / 3,14” |
| Ceiling thickness | 2mm / 0.078” min |
40mm / 1.57” max
Dimensions (WxHxD)| 110 x 165 x 80 mm / 4.33 x 6.5 x 3.15 in.
Weight| 0.9 kg / 1.98 lb
- 10dB below the sound pressure level at specified sensitivity
- 6dB below the sound pressure level than that at the direction of maximum level, Average from 1 kHz to 4 kHz.
- Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.
- Calculated from sensitivity and power handling specifications, exclusive of power compression
Mechanical diagrams
All product characteristics are subject to variation due to production
tolerances.
NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements
in the design or manufacturing that may affect these product specifications.
For technical queries contact your supplier, distributor or complete the
contact form on our website, in Support / Technical requests.
Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 |
information@ecler.com |
www.ecler.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>