Spraying Systems Co AA10000AUH-03-Z1 Electrically Actuated Automatic Spray Nozzle Instruction Manual

June 13, 2024
Spraying Systems Co

Spraying-Systems-Co-logo

Spraying Systems Co AA10000AUH-03-Z1 Electrically Actuated Automatic

Spray Nozzle

Spraying-Systems-Co-AA10000AUH-03-Z1-Electrically-Actuated-Automatic-Spray-
Nozzle-product

Product Information

  • Product Name: AA_10000AUH-03-Z1

  • Type: Electrically Actuated Automatic Spray Nozzle

  • Rating: Ex d (Flameproof Enclosure and Encapsulation)

  • Applications: Lubricating, Coating, Marking, Dispensing

  • Features:

    • Electrically Actuated Hydraulic Atomizing Nozzle

    • Accepts Standard Unijet Tip Sizes up to A-03 Capacity

    • Cycling Speeds up to 10,000 Cycles per Minute with Use of an Autojet Spray Controller

    • PWM Flow Control for a Wide Range of Spray Capacities with a Single Tip Size

    • Mounting Holes Accept #8-32 (NPT) or M4 Screws (BSPT)

    • Seals are Perfluoro Elastomers or Food Contact Rated Ethylene Propylene

    • Wetted Materials: PEEK, PPS, and Stainless Steel

    • Soft Seat for Positive Shutoff and Accurate Spray

    • Complies with the European Community (ATEX) and US Zone Safety
      Directives for Flameproof Enclosure and Encapsulation

    • Food Contact Versions Meet FDA and EC 1935/2004 Requirements

    • Flow Through Inlet Body Allows Recirculation through the Nozzle

    • Ground Wire (5m/16ft) for True Ground Connection

    • Integral Electrical Silicone Jacketed Cable (Length of 5m/16ft or 10m/33ft)

Product Usage Instructions

  1. Ensure that the hazardous area is classified as Zone 1.

  2. Mount the AA_10000AUH-03-Z1 spray nozzle using #8-32 (NPT) or M4 screws.

  3. Connect the ground wire (5m/16ft) to a true ground.

  4. Choose the appropriate cable gland based on the thread type:

    • If using an NPT thread, use a 1/2 NPT(M) conduit connection.
    • If using a BSPT thread, use an Ex d-rated M12X1.5 cable gland.
  5. Connect the integral electrical silicone jacketed cable to
    power the nozzle. Use a length of either 5m/16ft or 10m/33ft.

  6. For spray control, use an Autojet spray controller with PWM flow control to achieve a wide range of spray capacities with a single tip size.

  7. Choose the appropriate sales part number based on material requirements:

    • For general materials, use AA10000AUH-03-Z1 or AAB10000AUH-03-Z1.
    • For food contact materials, use AA10000AUH-03-Z1-EPFC, AA10000AUH-03-Z1-FC-10, AAB10000AUH-03-Z1-EPFC, or AAB10000AUH-03-Z1-FC-10.

DIMENSIONS

Spraying-Systems-Co-AA10000AUH-03-Z1-Electrically-Actuated-Automatic-Spray-
Nozzle-fig-1

AA_10000AUH-03-Z1

  • ELECTRICALLY ACTUATED AUTOMATIC SPRAY NOZZLE FOR ZONE 1 HAZARDOUS AREAS THE PULSAJET® 10000AUH-03-Z1 IS A SOLENOID-ACTIVATED AUTOMATIC SPRAY NOZZLE THAT IS SPECIFICALLY DESIGNED FOR FAST OPERATION IN ZONE 1 HAZARDOUS AREAS.

TYPICAL APPLICATIONS

  • LUBRICATING
  • COATING
  • MARKING
  • DISPENSING

FEATURES

  • ELECTRICALLY ACTUATED HYDRAULIC ATOMIZING NOZZLE
  • ACCEPTS STANDARD UNIJET TIP SIZES UP TO A -03 CAPACITY
  • TYPICALLY USED FOR SPRAYING ALCOHOL-BASED, OR SOLVENT-BASED FLUIDS IN AN AREA OR ZONE CLASSIFIED AS ZONE 1 HAZARDOUS
  • CYCLING SPEEDS UP TO 10,000 CYCLES PER MINUTE WITH USE OF AN AUTO JET SPRAY CONTROLLER
  • WITH PWM FLOW CONTROL, A WIDE RANGE OF SPRAY CAPACITIES CAN BE ACHIEVED WITH A SINGLE-TIP SIZE
  • MOUNTING HOLES ACCEPT #8-32 (NPT) OR M4 SCREWS (BSPT). FOR THE MOUNTING ROD KIT, SEE DATASHEET 50935
  • SEALS ARE PERFLUORO ELASTOMERS FOR OUTSTANDING CHEMICAL RESISTANCE OR FOOD CONTACT-RATED ETHYLENE PROPYLENE. OTHER WETTED MATERIALS INCLUDE PEEK, PPS AND STAINLESS STEEL
  • USES A SOFT SEAT TO PROVIDE POSITIVE SHUTOFF AND ACCURATE SPRAY
  • COMPLIES WITH APPROPRIATE EUROPEAN COMMUNITY (ATEX) AND US ZONE SAFETY DIRECTIVES FOR FLAMEPROOF ENCLOSURE AND ENCAPSULATION. FOOD CONTACT VERSIONS MEET FDA AND EC 1935/2004 REQUIREMENTS
  • FLOW THROUGH THE INLET BODY (1/8 NPT OR 1/8 BSPT) ALLOWS RECIRCULATION THROUGH THE NOZZLE
  • INTEGRAL ELECTRICAL SILICONE JACKETED CABLE (LENGTH OF 5 M/16 FT OR 10 M/33 FT) IS USED FOR POWERING THE NOZZLE. A 1/2″ NPT(M) CONDUIT CONNECTION IS USED FOR THE NPT VERSION, AND AN “Ex d” RATED M12X1.5 CABLE GLAND IS USED FOR BSPT VERSION

Spraying-Systems-Co-AA10000AUH-03-Z1-Electrically-Actuated-Automatic-Spray-
Nozzle-fig-2

DESCRIPTION

  • AA(B)10000AUH-03-Z1-__ &
  • AA(B)10000AUH-03-Z1-FC-
  • PULSAJET® 10000
  • AUTOMATIC SPRAY NOZZLE
  • FOR ZONE 1 HAZARDOUS AREAS

CONTACT

  • Spray Nozzles and Accessories
  • P.O. Box 7900 – Wheaton, IL 60187-7901

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals