Shanhai Yuanhui S9000 True Wireless Earbuds User Manual
- June 14, 2024
- Shanhai Yuanhui
Table of Contents
Shanhai Yuanhui S9000 True Wireless Earbuds
List of items
Product Introduction
- Do not attempt to disassemble or replace the inside of the product except for the operation mode specified in the manualAny part of.
- Do not put the product into water or any other liquid. This product is not waterproof.
- If any liquid accidentally enters the product, please disconnect it immediately and remove it.
- To avoid electric shock, make sure your hands are free from water when installing or uninstalling the product.
- Do not place this product near heat sources or directly expose it to fire sources.
- Do not place this product in an environment with strong electromagnetic force, otherwise, it may cause product failure.
Product specifications
- transmission distance:≥10M
- Battery capacity: 40mAh
- Usage time: about 7 hours (headset)
- Charging time: about 1.5 hours (headset)
- Rated input: 5V – 40mA
Charging box specification
- Battery capacity: 230mAh
- Charging time: 1.5 hours
- Rated input (input: 5V 260mA)
- (All technical information shall be
- subject to the actual performance)
Charge the charging box
- Charging state: red light flashes
- Charging completed: the red light is always on
- When the charging chamber is low, the green
- light flashes 4 times. Please charge it in time
LED indication status
Product Operating Instructions
-
Startup
Method 1: Open the upper cover of the charging box and start the machine automatically.
Method 2: Press and hold the touch function key for 3s to start the machine. -
Shutdown
Method 1: Close the cover and turn off the headset after it is put into the warehouse.
Method 2: Press and hold the MFB key for 5 seconds to shut down. -
pair
Open the upper cover of the charging box, and the headset will automatically enter the Bluetooth pairing mode Select the headset name in the Bluetooth list and connect
-
Touch button operation
Music playback mode
-
Left/right headset operation
Voice assistant: long press any headset 2S activation (Siri)
Incoming call mode
- Left/right headset operation
- Answer a call: click any headset
- Knot to return: click on one headset
- Reject a call: long press any headset for 1 second
Warranty Statement
- Fault damage caused by misuse, abuse, or improper transportation, use, maintenance, or storage;
- Failure or damage caused by force majeure (such as earthquake, war, fire, etc.) or accidents;
- The zipper and tower buckle are damaged due to excessive stress;
- Disconnection or tear caused by overload;
- Damage caused by any sharp object;
- Products with signs of burning or water immersion;
- Damage caused by unauthorized removal and modification;
- Aging, discoloration, wear, fracture, and other losses during normal use of the product.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation
is subject to the following two conditions;
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference that will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. Which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures;
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>