TECHKO STL-232 Solar Lantern User Manual

Solar Hanging Lantern
USER MANUAL

Please carefully read this manual before using the product,
Keep the manual with you for reference as needed.

FULLY CHARGE THE PRODUCT BEFORE USING

1. Secure the unit and fully charge in direct sunlight and select desired operating mode before use.
2. Charging time may vary depending on the weather,temperature and seasons
3. Do not place the product indoors or any place where there is no direct sunlight the product will not charge properly.

INSTALLATION INSTRUCTIONS

(Wall with Bracket Kit)

1. Place the mounting sticker in a location where the product will be installed to.
   Then drill 3 holes into the guides shown on the mounting sticker.

2. Insert the supplied anchors into the drilled holes.

3. Place and align the wall bracket against the wall and then use a screwdriver to secure the bracket with the provided screws.

4. Place the solar unit to the bracket

SWITCH & FUNCTIONS

  The switch is on the top of the solar unit.

1. Slide the switch to the desired position.
   a. Flame Mode: Siide switch to the “Flame” position. The light will illuminate with aflickering flame effect.
   b Still Mode: Side switch to”Still” position. the light will stay illminated Please note all LED’s will not be illuminated in this setting
   c.Off Mode: Slide switch to the “Off” position, the light power is off. The product can be charged in all operating modes The solar panel is equipped with daylight sensor.
   The product will charge in direct sunlight during the daytime and automatically turn on at dusk

Install the unit in a place where the solar panel can be continually exposed to the sun.
Avoid placing the unit where shade from buildings or objects would block the solar panel.

OPERATING INSTRUCTIONS

1. The handle is located on the top of the unit, around the solar panel.
2. After the unit has fully charged, change the switch to the desired position to select the operating mode.

WARNING & NOTICE

1. Do not look directly at the LED light for along period of time,or it may damage your eyes.
2. Do not attempt to disassemble or remodel the product. Any changes can be dangerous and will void the warranty.
3. keep awayfrom any flammable items, or explosion, property damages, or casual injuries may occur.
4. keep the solar panel clean to make sure the product can be properly charged. Frequently clean the solar panel as needed. Avoid scratching on the panel or it may lower charging efficiency.

PRODUCT SPECIFICATIONS

iUser manual
1 Mounting sticker
3″ Screws/rAnchors

This product has a 1-year limited warranty. For further information please visit our website at www.techkogroup.com
Copyright Reserved
Patent Pending: US 16/412,865

1-888-883-2456
support@techkogroup.com
Model: STL-232

Documents / Resources

| TECHKO STL-232 Solar Lantern [pdf] User Manual
STL-232 Solar Lantern, STL-232, Solar Lantern, Lantern
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>