TECHKO SKL-506 Outdoor Pillar Light User Manual
- June 13, 2024
- TECHKO
Table of Contents
Solar Wall Pillar
USER MANUAL
Model: SKL-506
SKL-506 Outdoor Pillar Light
Please carefully read this manual before using the product.
Keep the manual with you for reference as needed.
PLEASE FULLY CHARGE THE PRODUCT BEFORE USING
- Secure the unit and fully charge in direct sunlight and select desired operating mode (White or Amber) before use.
- Charging time may be vary depending on the weather, temperature and seasons.
- Do not place the product indoors or any place where there is no direct sunlight. The product will not charge properly.
- Keep the solar panel clean to ensure the product can be properly charged. Frequently clean the solar panel as needed. Avoid scratching on the panel or it may lower charging efficiency.
INSTALLATION INSTRUCTIONS
OPTION #1 (Lamp) (Please see Figure A for reference)
- Connect the solar torch light main body to the supplied lamp base.
OPTION #2 (Wall with Bracket Kit)
-
Place the mounting sticker in a location where the product will be installed to.
Then drill 2 holes into the guides shown on the mounting sticker. -
Insert the supplied anchors into the drilled holes.
-
Place and align the wall bracket against the wall and then use a screwdriver to secure the bracket with the provided screws.
Adjust the provided wing nut and the unit bracket to the desired length and then tightly secure, Make sure the unit bracket is pointing upward. -
Push the back of the solar unit against the unit bracket, then slide the unit down to secure the unit to the bracket.
Please install the unit in a place where the solar panel can be continually
exposed to the sun.
Avoid placing the unit where shade from buildings or objects would block the
solar panel.
Switches & Functions (Please see Figure B for reference)
-
Slide the switch to the desired position.
a. White – Changes the lights color to a bright white light
b. Amber – Changes the lights color. to a warm amber light
c. Off – Move the switch to the center to turn the solar light off. -
Even when the unit is on White or Amber settings during the daytime, it won’t illuminate as the solar panel is equipped with a daylight sensor. The product will automatically charge during the daytime and turn on at dusk or when surroundings turn dark.
The switch is on the top of the solar unit.
The product can be charged in all operating modes.
The solar panel is equipped with daylight sensor.
The product will charge in direct sunlight during the daytime and
automatically turn on at dusk.
WARNING & NOTICE
- Do not look directly at the LED light for a long period of time or it may damage your eyes.
- Do not attempt to disassemble or remodel the product. Any changes can be dangerous and will void the warranty.
- Please keep the product away from flammable items, explosion or injuries may occur.
- Please switch to the OFF position when the unit is not in use for a long period of time.
PRODUCT SPECIFICATION
| Material | ABS | Solar Panel | 2.2×2.2 inch x3pcs/ 1W |
|---|---|---|---|
| Battery | Li-ion battery 18650 2200mAh | Waterproof | |
| Performance | IP65 | ||
| Size | Main body: 7.6×7.6×15.23 inch | ||
| Lamp base: 3.94×3.94×2.41 inch | Accessories | 1*Light main body |
1Lamp base
1Bracket kit
1User manual
1Mounting sticker
2Screws/2Anchors
This product has a 1-year limited warranty. For further information please
visit our website at www.techkogroup.com
Copyright Reserved
Patent Pending: US 16/279.107;CN201920118689.6
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>