511582 Otamatone Neo Black Instrument Synthesizer Instruction Manual
- June 13, 2024
- OTAMATONE
Table of Contents
511582 Otamatone Neo Black Instrument Synthesizer
Product Information
The NEO Otamatone is a musical instrument that produces sound by pressing the Stem switch and manipulating the mouth. It requires 3 AA batteries (not included) for operation. The product features a Power/volume control switch, an Octave switch, and an OTM Link for connecting to a smartphone.
Battery Installation
- Open the battery cover using a right-sized coin or equivalent item.
- Take out the cushioning material provided for maintaining the shape of the mouth and discard it.
- Place 3 AA batteries in the battery box, following the directions shown on the bottom of the battery box.
- Make sure the batteries are inserted in the correct direction.
- Close the battery cover and tighten the screw.
Power and Volume Control
To turn on the NEO Otamatone, turn the Power/volume control switch to the
right until it clicks. The LED light will come on. To adjust the volume, turn
the switch towards the right to increase it or towards the left to decrease
it. To turn off the power, turn the switch all the way to the left until the
LED light goes off.
Techniques
The NEO Otamatone offers various techniques to create different sounds:
- Push Technique: Push the Stem switch anywhere to produce a “mmm” sound. Experiment with pushing different places to change the sound.
- Portamento Technique: Push and hold the Stem switch, then slide your fingers up and down to create a “peooow” sound. Adjust the pressure and try changing the Octave switch for different pitches.
- Wah Wah Technique: While pushing the Stem switch, open and close the mouth to vary the sound from “woo” to “wah”. Repeat this motion to create a “wah wah wah” effect.
- Vibrato: Vibrate the Stem switch while using the Push technique to produce a tremulous or pulsating effect in the sound.
Usage Tips
- Hold the Otamatone with your right hand, placing your index finger and thumb on the raised dots. Use your left hand to push the Stem switch and manipulate the mouth.
- To conserve battery life, turn off the Power/volume control switch until it clicks after playing.
- Note that the Mouth technique does not work while using headphones.
INSTRUCTION
Step 1
Put new batteries in the battery box.
Before using the product please take out the cushioning material provided for
maintaining the shape of the mouth.
Discard the material
-
Hold the battery cover and open it with a right size coin (or an equivalent item.)
How to change batteries:
Requires batteries: AA x3- Included batteries are for testing only.
- Alkaline batteries are recommended.
Caution: The battery cover may spring open as you loosen it. Keep your face away from it
-
Take the battery box out and place batteries.
- Place batteries in the right directions
- Follow the directions shown on the bottom of battery box.
- Change the batteries when the sound gets softer or intermittent
-
Attach the cover as shown, push to close, and tighten the screw
Step 2
Set up the Otamatone for playing
- Turn the Power/volume control switch to the right until it clicks; LED light will come on.
- Set the Octave switch to the desired level.
Hint to make the batteries last: Turn the power/volume switch off until it clicks after playing
Step 3
Hold the Otamatone
Push raised dots to open the mouth.
Left-handed persons may want to switch hands.
Step 4
Techniques! – Try different techniques!
Push Technique
- Push the Stem switch anywhere! This will make „mmm“ sound.
- Push different places and the sound will change too.
- Push the Stem switch with your index finger and thumb.
Portamento Technique
Push and hold the Stem switch.
Slide the fingers up and down.
This will make „peooow“ sound.
Push a bit harder and slide to make sure the sounddoes not break.
After mastering the technique, you can adjust the pressure.
Change the Octave switch to try a different pitch.
Step 5
Techniques! – Try different techniques!
Wah Wah Technique
While pushing the Stem switch, open and close the mouth.
The sound changes from „woo“ to „wah“. Repeat this to make „wah wah wah“.
This will vary the sound . The opening and the closing of the mouth entertains
everyone!
Vibrato:
A tremulous or pulsating effect produced in an instrumental or vocal tone.
Vibrate the Stem while doing the Push technique.
The sound changes according to the vibration.
Mouth Technique does not work while using the headphones
Step 6
OTM Link (Otamatone Music Link)
A new feature that allows you to connect the Otamatone to a smartphone or
tablet. All you need to do is plug in the included 4-pole 3.5mm stereo cable.
As easy as that!
Not all Android devices can be used with the app.
Caution
- Devices without a 4-pole 3.5mm stereo jack can only be connected via OTM Link by using an adapter that supports microphone input.
- Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
- iPhone, iPad and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
- The iPhone trademark is used with permission of Aiphone Co., Ltd.
- Google Play and the Google Play logo are trademarks of Google Inc.
- Android is a trademark and registered trademark of Google Inc.
When using a 3.5mm adapter for the cable
- Make sure your adapter supports microphone input. If the adapter can only be used for musical output OTM Link will not work. Please note that due to app or device specifications OTM Link might not work properly.
- Make sure the adapter is not damaged. If it doesn’t fully transmit the signal OTM Link will not work properly.
- Using an adapter can result in lower volume. In this case, please adjust the volume through your device or the app.
- Using an adapter can create noise. It is not possible to fully prevent this problem but adjusting the volume through your device or the app can help.
Step 7
OTM Studio
Menu
Check the following options.
Terms of Service, Privacy Policy, User Manual, Language, Contact and Support,
Info
Store
The complete set of features can be unlocked through in app purchases.
Main screen
An overview of the current status. The Otamatone parts each correspond to a
certain mode. If you tap them and switch to a different mode the buttons below
will change as well. The mouth on the main screen will move while you are
playing.
Tap the red circle to display the instrument buttons.
Instrument buttons
Each mode has a set of buttons for its specific functions. Your current
selection is highlighted in dark grey (buttons look different in different
modes).
Tap a button to change your Otamatone’s sound.
Volume Fader
Each mode has a different looking fader. Use this to adjust volume.
You can choose between 9 instruments.
Important Safety Instructions
Safety instructions for using AC power source:
Mishandling of power source may cause fatal accidents or serious injuries.
- Check the voltage rating before you connect the adapter to an electrical outlet to ensure that the required voltage and frequency match the available power source.
- Use only the specified AC adapter approved for use with this product. Wipe off dust from the AC adapter plug to avoid electric shock or short circuit.
- Electric Shock Hazard: Do not handle the AC-adapter with wet hands.
- Unplug the AC adapter after use.
- Be sure to grasp the adapter itself, not the cable, when disconnecting the AC adapter from the power source.
- Do not piggyback the electrical outlet. lt may cause overheating.
- Do not forcefully bend, twist, or pull the cable, or modify the cable.
- Do not put the cable under furniture, electric appliances, figurines, or any other heavy objects. Damaged cables may cause fire or electric shock.
- Do not use any AC adapter with damaged cable.
- In the event that the AC adapter becomes damaged or the unit mal- functions, turn the unit off and disconnect the AC adapter immediately.
For more information and other Otamatone models, visit the Thomann Website: