ZETHORS S8 Smart Cordless Tyre Inflator Electric Bike Pump User Manual

ZETHORS S8 Smart Cordless Tyre Inflator Electric Bike Pump

Product Information

• Product Name: Smart Air Pump Model S8
• Languages: English, German, French, Italian, Spanish
• Specifications:
  • Material: Not specified
  • Operation Method: Not specified
  • Battery Capacity: Not specified
  • Charging Time: Not specified
  • Inflation Air Flow: Not specified
  • Rated Power: Not specified
  • Pressure Range: Not specified
  • Pressure Precision: Not specified
  • Illuminating Brightness: Not specified
  • Working Voltage: Not specified
  • Working Current: Not specified
  • Charging Parameter: Not specified
  • Motor Overcurrent Protection: 5A
  • Motor Working Voltage: 12V
  • Working Temperature: -20°C to 45°C
  • Product Size: 68 x 68 x 137mm / 2.7 x 2.7 x 5.4in
• Package Contents:
  • 1 x Smart Air Pump
  • 1 x Air Tube (20cm / 8in)
  • 1 x Inflating Needle
  • 1 x Inflation Nozzle
  • 1 x Pesta Valve
  • 1 x Type-C Charging Cable
  • 1 x Storage Bag
  • 1 x User Manual

Product Usage Instructions

1. Before using the Smart Air Pump, please ensure the following:

   • Place and use the product away from children.
   • Read and fully understand the operation instructions in the user manual.
   • Check for any abnormalities in the air pump before use. If any issues are found, do not use it.

2. Warnings for correct tire pressure:

   • Ensure the correct tire pressure for safe driving.
   • This product is not suitable for tires that require high capacity/high air pressure.
   • Before setting the inflation pressure value, make sure the correct unit of measurement is selected to avoid accidents like tire burst.
   • Inflate and check the tires regularly according to the air pressure recommended by the car manufacturer.

3. Danger warnings due to improper use:

   • Use the product in a safe area and avoid using it in a flammable and explosive environment.

   • Use the product in a dry and clean environment to prevent
     damage from sand and dust intrusion.

   • Do not fold or squeeze the air tube when inflating, keep the air flow smooth.

   • Do not leave the site when the air pump is in operation.

4. Battery Warnings:

   • Do not disassemble, impact, squeeze, or expose the battery to
     fire or high temperature environments.

   • Replace the battery only with the same or equivalent type to avoid the risk of explosion.

   • Avoid exposing the battery to excessive heat.

   • Do not use damaged or modified battery packs.

5. Air Pump Using Instructions:

6. For the first use, charge the Smart Air Pump for about 4 hours. For subsequent charges, fully charge it.

7. Press the Set button to switch between different modes:

  * Cars (default 36 PSI)
  * Motorcycles (default 35 PSI)
  * Bicycles (default 45 PSI)
  * Balls (default 8 PSI)

Model: S8

Thank you for buying ZETHORS Smart Air Pump. For the best user experience, please read this user manual carefully before use and keep it for further reference.

Please note before use!

1. This product should be placed and used away from chil-dren.
2. Please read carefully and fully understand the operation instructions before use.
3. Please check before using the air pump, if there is any abnormality, do not use it.

Warnings! Make sure you’ve selected the correct tire pressure and operate it properly!

1. Correct tire pressure is very important for safe driving.
2. This product is not suitable for tires that require high capacity/high air pressure!
3. Before setting the inflation pressure value, please make sure the correct unit of measurement is selected, or it may cause accidents like tire burst.
4. Make sure to inflate the tires and check the spare tire regularly according to the air pressure recommended by the car manufacturer.

Warnings! Danger due to improper use!

1. Please use it in a safe area, and do not use it in a flamma-ble and explosive environment.
2. Please use it in a dry and clean environment. The intru-sion of sand and dust may cause damage to the product.
3. Do not fold and squeeze the air tube when inflating,please keep the air flow smooth.
4. The operator cannot leave the site when the air pump is working. It is necessary to observe the inflation process to prevent the inflation pressure from being too high when the preset pressure is not set.
5. Under-inflation or over-inflation may be dangerous (do not over-inflate).
6. The temperature of air tube will rise when the product works for a long time. If the product makes abnormal noise or the temperature is too high, please shut down immediately and use it after the product cools down for 10 minutes.
7. It is recommended not to use it continuously for more than 10 minutes. When exceeds 10 minutes, please shut it down and cool it down for 5 minutes before continuing to use it.
8. When using a charger for power supply, please buy or use a 5V-1A/2A charger that obtains safety certification (CCC, CE, FCC, PSE, UL, etc.) and meets the standard requirements.
9. The product is not waterproof, and it is forbidden to rinse with water.

Battery Warnings!

1. It is forbidden to disassemble, impact, squeeze or put into fire; if severe swelling occurs, stop using. Do not place it in high temperature environment.
2. There will be risk of explosion if battery is incorrectly replaced, please replace only with the same or equivalent type.
3. Batteries (battery packs or assembled battery) must not be exposed to excessive heat such as sunlight, fire, or similar overheated environment.
4. Do not use damaged or modified battery packs, as un-predictable consequences may occur, resulting in risks of fire, explosion and injury.
5. The storage temperature of the product should not be lower than -10°C or higher than 45°C. Overcooling or overheating will shorten the product life and damage the built-in battery.
6. In order to ensure the battery life, it is recommended to use or charge it at least once every 3 months.
7. For products containing lithium batteries, please dispose of them separately from household waste. To reduce pollution and maximize the protection of the earth’s envi-ronment, the product should be disposed of at the end of its life and recycled according to local regulations.

Specifications

Package Contents

| 1 x Smart Air Pump

1 x Air Tube (20cm/8in) 1 x Inflating Needle

1 x Inflation Nozzle 1 x Pesta Valve

1 x Type-C Charging Cable 1 x Storage Bag

1 x User Manual

PRODUCT OVERVIEW

Button Function Description

• Set Button: Short press to switch unit (PSI, BAR, KPA, Kg/cm²), while long press to switch inflation mode (cars, motorcycles, bicycles, balls).
• Power Button: Long press for 3s to turn on; then, short press again to start inflating.
• Lighting Button: Long press to turn on the lighting, short press again it will flash slowly, and short press again it will flash quickly.
• Air Pressure + Button: Short press to increase the preset air pressure value, while long press to quickly increase.
• Air Pressure – Button: Short press to decrease the preset air pressure value, while long press to quickly decrease.

Recommended Inflation Pressure

Bikes

| 12, 14, and 16-inch bicycle tires| 30-50PSI
---|---|---
20, 21, and 22-inch bicycle tires| 40-50PSI
26, 27.5, and 29-inch mountain bicycle tires| ****

45-65PSI

Road bicycle tires| 100-

150PSI

Motorcy- cles| Motorcycle, electric motorcycle tires| 26-40PSI
Cars| Car tires, SUV tires| 31-40PSI

Balls

| Basketball| 7-9PSI
Football| 8-16PSI

Air Pump Using Instructions

1. Please charge about 4h for the first time, and each charge after that please fully charge.
2. After power on, the screen will start to display, and long press the Set button to switch between the 4 air pres-sure units of PSI, BAR, KAP, and Kg/cm²; select the unit you want, and press the Air Pressure +/- button to set the air pressure value you need; after the number stops flashing, press the power button to start inflating.
3. Press the Set button to switch among cars (default 36PSI), motorcycles (default 35PSI), bicycles (default 45PSI), balls (default 8PSI).
4. To customize the air pressure value, you can short press the Air Pressure +/- Button to increase/decrease the preset air pressure, and long press to quickly increase/decrease.
5. When inflating, the air pump will automatically stop inflat-ing when the preset air pressure value is reached.
6. After the air pump power on, if the air pressure value cannot be monitored, it will automatically stop inflating after continuously working for 40-50 seconds.
7. After the inflating is finished, there will be some air leak-age when the connector is unscrewed, which is a normal phenomenon. Please place and store the air pump in a dry and ventilated safe place.
8. If it is judged that the tire pressure is too high, you can use the tire inflation joint to screw on the appropriate position on the valve core to deflate and decompress.

Screen Display Description

1. Long press the power button for 2s, the screen display will light up, and then the display will stay on the car icon (the default setting for first use). If there is not any operation within 60s, the screen will automatically turn off.
2. When pressing the Mode Button to select different inflation objects, the screen will display the preset tire pressure of the corresponding inflation object.
3. Battery Power Display: The power icon flashes red light when the remaining power of the air pump is 5%, while it shows solid red light when the remaining power is 20%; while charging, it flashes blue light; after fully charged, it shows solid blue light.

Accessories Using Instructions

This air pump comes with an inflation nozzle, an inflating needle, and a Pesta Valve. You can use the correspond-ing nozzle according to different usage scenarios.

1. Take out the required inflation nozzle/inflating needle/Pesta Valve, align it with the inflation nozzle of the air pump and tighten it to combine them together.
2. Use the same operation steps as “Air Pump Using In-structions” to inflate related items.

Charge the Air Pump

1. Under power-on/off state, insert the charging cable into the air pump USB-C charging port to charge.
2. While charging, the power icon displayed on the screen flashes red light; after fully charged, it shows solid blue light.

FAQ

1. The air pump does not stop when it reaches the pre-set value.
   a. Check whether the operation is correct according to the setting instructions.
   b. Check whether the preset value is correct.

2. On-screen readings are inaccurate or unavailable. When the tire valve is connected, make sure the screen displays the current tire pressure before turning on the pump.

3. The air pump is running but cannot inflate.
   Check if the inflation nozzle is fully connected with the tire valve.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>