CUBOT P80 Full Smartphone User Guide
- June 13, 2024
- CUBOT
Table of Contents
CUBOT P80 Full Smartphone
Product Information:
- EN: Side fingerprint sensor
- DE: Seitlicher Fingerabdrucksensor
- ES: Sensor de huellas dactilares lateral
- IT: Sensore di impronte digitali laterale
This product features a side fingerprint sensor, allowing users to unlock the device or authenticate their identity using their fingerprints.
The product is designed and manufactured by SHENZHEN HUAFURUI TECHNOLOGY CO., LTD. under the brand name CUBOT. The company’s address is Unit 1401 & 1402, 14/F, Jin qi zhi gu mansion (No. 4 building of Chong wen Garden), Crossing of the Liuxian street and Tang ling road, Tao yuan street, Nan.
The product supports dual SIM functionality with two SIM card slots (SIM 1 and SIM 2). It also supports SD card expansion for additional storage.
Product Usage Instructions
- To use the side fingerprint sensor, place your registered finger on the designated area of the device’s side.
- Ensure that the fingerprint sensor area is clean and free from any dirt or moisture.
- Gently press your finger against the sensor, making sure to cover the entire area.
- Hold still until the device recognizes and verifies your fingerprint.
- If the fingerprint is successfully recognized, the device will unlock or authenticate your identity accordingly.
- If the fingerprint is not recognized, try repositioning your finger or use an alternative unlocking method.
- To insert SIM cards, locate the SIM 1 and SIM 2 slots on the device.
- Insert the SIM cards into the respective slots according to the provided instructions or markings.
- To expand storage using an SD card, locate the SD card slot on the device.
- Insert the SD card into the slot carefully, ensuring it is properly aligned.
- Follow any additional instructions or settings on the device to configure the SIM cards or SD card.
Welcome
Welcome to the CUBOT family! We’re thrilled you’ve chosen CUBOT. This guide
will help you get the most out of your new device.Read through this quick
start guide carefully to ensure safe and proper use of your device.
Get Support
Please visit the www.cubot.net/support page to
find more information on our warranty and return policy.
You can also reach out to CUBOT Customer Support by visiting www.cubot.net/support.
Regulatory information
Regulatory information can be found on our website. RoHS CE WEEE
INSTALLATION
WARNING
- Follow the warning information provided below to prevent incidents such as fire or explosion.
- Do not turn on or use the device when the battery compartment is exposed.
- The phone should be at least 15 cm away from any medical implant or rhythm adjuster
- Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
- If the device is equipped with a non-removable battery, do not replace the battery yourself to avoid damaging the battery or device.
- Use of an unapproved or incompatible power source, charger or battery may cause fire. explosion or other hazards.
- Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating. fire or explosion.
- Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
- Possibly Keep the device away from the belly of pregnant women and the lower abdomen of adolescents.
- For Children and young people, please make sensible use of the device, for example by avoiding night-time communication and limiting the frequency and duration of calls.
- The company does not bear the responsibility for accidents caused by non-standard related charging equipment
To prevent possible hearing damage when using a headset, do not listen to
sound at high volume U for long periods.
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste.
INSTRUCTION
SHENZHEN HUAFURUI TECHNOLOGY CO.,LTD.
Designed by CUBOT
All rights reserved
Made in China
Unit 1401 &1402, 14/F, Jin qi zhi gu mansion (No. 4 building of Chong wen
Garden), Crossing of the Liu xian street and Tang ling road, Tao yuan street,
Nan shan district, Shenzhen, 518055, P.R. China
Tel. No. : 0755-83821787
Fax No. : 0755-23612065