DENNERLE D-66981 Nano Corner Filter Instruction Manual

DENNERLE D-66981 Nano Corner Filter

Product Information

The Nano Eckfilter / Eckfilter XL is a compact, high-performance corner filter designed for mini-aquaria. It comes with various components to ensure efficient filtration and water quality.
The product is manufactured by DENNERLE, a renowned brand in the aquarium industry.

• Scope of delivery:

  • Pump housing
  • Filter housing (two-part) with filter element
  • Connector
  • Elbow
  • Sponge (2 pieces)
  • Cleaning brush for nozzle tube

• Optional accessories:

  • Replacement filter elements
  • Rotor
  • Nozzle tube
  • Suction clips
  • Nano FilterModul (refillable filter cup)
  • Nano FilterExtension (attachable, refillable auxiliary filter)
  • Nano BabyProtect (attachable intake protector for shrimp larvae)
  • Nano Bio FilterGranulat (300 ml)
  • Nano ActiveCarbon (300 ml)
  • Nano AlgenStop Phosphate Remover (300 ml)

• Technical specifications:

  • Power consumption: 2 W
  • Mains lead length: 1.40 m

• Guarantee:

  • Guarantee period: 24 months (except wearing parts)

  • Claims must be submitted to DENNERLE’s Customer Service
    Department along with the proof of purchase

  • Manufacturing and material defects are covered by the guarantee

  • The device can only be opened by DENNERLE’s Customer Service personnel during the guarantee period

• Manufacturer’s website:www.dennerle.com

Product Usage Instructions

1. Read the instructions for use carefully before using the aquarium for the first time. Keep the instructions in a safe place.
2. Installation:
   • Assemble the pump housing and filter housing with the provided filter element.
   • Connect the nozzle tube, elbow, and sponge to the filter housing.
   • Place the filter in the desired corner of the mini-aquarium.
   • Adjust the water flow using the setting knob.
   • For regular aquaria, keep the nozzle tube underwater to create a gentle movement of the water surface. This helps prevent CO2 loss and promotes oxygen production by plants.
   • For breeding and temporary storage of aquaria, keep the nozzle tube above water to create a stronger flow of water.
3. Cleaning and replacing the filter elements:
   • Regularly clean the filter elements to maintain optimal performance.
   • To clean, remove the filter housing and rinse the filter element under running water. Do not use soap or chemicals.
   • If necessary, replace the filter element with a new one from the available replacement options.
4. Cleaning the pump, setting knob, and nozzle tube:
   • Periodically clean the pump, setting knob, and nozzle tube to remove any debris or buildup.
   • Use the provided cleaning brush for thorough cleaning.

Note: For any warranty claims or further information, refer to DENNERLE’s Customer Service department and provide proof of purchase.

Nano corner filter/corner filter XL Compact, high-performance corner filter for mini-aquaria

• Please be sure to read the instructions for use carefully and in their entirety before using the aquarium for the first time.
• Keep the instructions in a safe place. -Congratulations on buying this high-quality product from DENNERLE. We wish you lasting enjoyment from your aquarium!

Safety instructions

• For 230 V AC / 50 Hz only.
• For indoor use only.
• Always disconnect all devices located in the water from the power supply before placing your hands in the aquarium water.
• The main plug must be accessible at all times after installing the device.
• All cables leading out of the aquarium and the mains leads of the employed devices must be provided with a drip loop to prevent any water that may run down the cables from reaching items of equipment or the main socket outlet.
• Equipment with a damaged connecting lead must no longer be used. A damaged connecting lead cannot be replaced.
• Maximum permissible immersion depth: 50 cm
• Maximum permissible water temperature: 35 °C

Scope of delivery and description of components

1. Pump housing
2. Filter housing (two-part), with filter element corner filter XL: 2 filter elements
3. Setting knob for water flow rate
4. Outflow pipe, rotatable by 90°
5. Nozzle tube with cleaning hatch
6. Connector
7. Elbow
8. Sponge (2 pieces)
9. Cleaning brush for nozzle tube

Installation

• Prior to use, remove the filter housing and rinse all parts with warm water.
• Fit the filter in the desired corner of the aquarium using the suction clips.
• Depending on the intended purpose of the filter, it should be positioned as follows:
• For plant aquaria with CO2 supply: Nozzle tube under the water surface, relatively weak flow rate. 2
• This results in only gentle movement of the water surface, thus avoiding unnecessary losses of CO2. The vital oxygen is produced by the plants.
• For breeding and temporary storage aquaria: Nozzle tube above water, stronger flow of water.
• In this way, sufficient oxygen is supplied to the aquarium. 3
• For paludaria: Place the filter in the horizontal position in the water area. Secure the nozzle tube with an elbow. 4
• Where necessary, the space between the filter and the corner of the aquarium can be closed off with the two sponges, in order to keep out fish and other creatures that live in the aquarium. 5
• The filter should be positioned at least 2 cm away from the bed so that the pump is not damaged by any gravel that is sucked in.
• The pump should never be allowed to run dry – this could damage the motor engine and bearing.

Cleaning and replacing the filter elements

• The filter elements should be cleaned every 2-6 weeks, depending on the level of contamination:
• Disconnect the mains plug.
• Remove the filter from the aquarium. Remove the filter housing by pulling it downwards. 6 Pull the filter housing apart 7 , Remove filter elements, and wash out carefully – ideally in a clean bucket containing aquarium water, so as to avoid harming the important filtering bacteria.
• In order to maintain a high level of filter performance, the filter element should be replaced every 3-6 months.
• Replacement filter elements: Art. no. 5926.
• Corner filter XL: We recommend cleaning and replacing the two filter elements one by one. In this way, one filter element will remain biologically active, ensuring a constantly high level of water quality.
• Cleaning the pump, setting knob and nozzle tube
• Remove filter housing.
• Remove the cover cap, pull out the rotor, and clean all parts carefully – avoid bending the rotor axle! 8
• Pull the setting knob upwards to remove it for cleaning purposes. 9
• Clean the nozzle tube by means of the integrated slide, and 10 clean the nozzles with a mini-brush 11.

Technical data

• Mains voltage/mains frequency: AC 230 V / 50 Hz
  • Max. pump delivery rate: 150 l/h
• IPX8 – waterproof
  • Wattage : 2 W
• Mains lead : 1.40 m

Spare parts and accessories

• 5926 Replacement filter element 5865 Filter element pack of 3 5928 Rotor
• 5897 5897 Spares and accessories set: Nozzle tube, connector, elbow, sponge, mini-brush
• 5898 6 suction clips 5845 Nano FilterModul (refillable filter cup instead of filter element)
• 5840 Nano FilterExtension (attachable, refillable auxiliary filter)
• 5846 Nano BabyProtect (attachable intake protector for freshly hatched shrimp larvae)
• 5844 Nano Bio FilterGranulat, 300 ml 5841 Nano ActiveCarbon, 300 ml
• 5842 Nano AlgenStop phosphate remover, 300 ml

Guarantee conditions

• Guarantee period: 24 months (except wearing parts)
• When submitting guarantee claims, please send the equipment to Dennerle’s Customer Service department together with the receipt providing proof of purchase.
• The guarantee covers manufacturing and material defects. Defective parts will be replaced or repaired free of charge during the guarantee period, provided that the equipment has been used only in the correct manner and for the intended purpose.
• During the guarantee period, the device may only be opened by Dennerle’s Customer Service personnel, otherwise, the guarantee coverage will lapse.
• No claims shall be assertible beyond the value of the device, e.g. for damage to fish or plants.
• We reserve the right to carry out technical modifications.
• Sales / distribution: Dennerle GmbH
• D-66957 Vinningen
• Customer Service: Dennerle GmbH
• Industriestraße 4
• D-66981 Münchweiler, Germanywww.dennerle.com

References

• Natur erleben - Mit den Dennerle Aquarium Systemen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>