Dalton K108A Portable Speaker User Guide

June 13, 2024
Dalton

Dalton-LOGO

Dalton K108A Portable Speaker

Product Information

  • Product Name: K108A
  • Brand: Dalton
  • Manufacturer: Thien Thanh Dat JSC.CO.
  • Output Power : 250W
  • Woofer Size : 8 inches
  • Integration of wireless microphones UHF can change the frequency
  • Supports USB connection
  • Supports Bluetooth connectivity
  • Input Connectors: External microphone
  • Playtime: 2-4 hours (depending on power level used)
  • Power Source: AC120V or Battery 12V/6Ah

IMPORTANT SAFETY INSTRUCTIONS

  • Warning : to reduce the risk of electric shock, do not overexpose this appliance to rain or moisture.
  • Warning : the mains plug or AC inlet is used as a disconnect device shall remain readily operable.
  • Warning : connect only to the mains socket with a protective earthing connection.
  • Warning: to reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

CAUTION: The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electricity. shock to persons.

WARNING: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with a dry cloth.
  7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  8. Only use attachments/ accessories specified by the manufacturer.
  9. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on this apparatus.
  10. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  11. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
  12. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  13. Unplug the apparatus during lightning storms or when unused for long periods of time.
  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  15. To completely disconnect AC power from this apparatus, the power supply cord must be unplugged.
  16. Unplug the power cord when fully charged.

INTRODUCTION TO THE K108A

  • Output power: 250W
  • Woofer: 8 inches.
  • Integration of wireless microphones UHF, can change the frequency.
  • Support USB.
  • Support Bluetooth connection.
  • Control button: Bass/Mid/Treble/Echo/Delay for Micro and Bass/ Treble for Music distinct.
  • Input Connectors: external microphone.
  • Playtime: 2-4 hours depending on used power level.
  • Power source: AC120V or Battery 12V/6Ah.

FRONT

Dalton-K108A-Portable-Speaker-FIG-1

BACK

Dalton-K108A-Portable-Speaker-FIG-2

POWER SOURCE

  1. POWER Power Switch

    • ON : Now turn the power switch to the “on” position, can plug in AC power, use AC power, and charge the battery at the same time.
    • OFE. Power Off
    • LED LIGHT
    • ON: the “ON” LED indicator should now be illuminated. At this point, you are ready to make audio connections.
    • LOW: The “LOW” LED is the battery power that needs to be charged.
    • Charge: The “CHARGE” LED status is charging.
    • 2VDC: Input Connectors external DC 12V source.
    • AC- 120V/50Hz-60Hz: Connect to AC power supply.
  2. MUSIC CONTROL

  3. V. Music: Adjusts the volume level for music.

  4. HI: Treble control adjusts the amount of high frequencies: on the particular channel.

  5. LOW: Bass control adjusts the amount of low frequencies on the particular channel.

  6. AUX INPUT: Inputs external microphone signal ( connect a TV or different musical instruments by connecting wire).

  7. MIC CONTROL

    • DELAY: Adjusts echo delay.
    • ECHO: Adjusts the volume level echo.
    • HI: TREBLE volume adjustment for the microphone.
    • LOW: BASS volume adjustment for microphone
    • V.MIC: Adjust the volume of the wireless microphone or external microphone.
    • MIC IN: Inputs external microphone signal (wireless or wired).
  8. SETTING FREQUENCY OF WIRELESS MICRODalton-K108A-Portable-Speaker-FIG-55
    Connect Microphone to Speaker

  9. Turn off the speaker and Microphone.

  10. Press and hold the microphone power button and “SET” button at the same time for about 4 seconds to start the auto frequency detection mode (LCD blinks continuously)

  11. Turn on the Power Switch.

  12. After 5s press the “SET” button again to complete the connection.

  13. CHOOSE AND ADJUST MUSIC MODE

K108A is integrated with music features from USB, Bluetooth.

MAIN FUNCTIONS

: Pause/Play.
† Pause/Play song
+ Hold about 3 seconds to disconnect/ reconnect the speaker’s Bluetooth from your device.
Prev
+ PREV go back to the previous song.
Next
+ NEXT go to the next song.

BLUETOOTH CONNECTION

Setting

  • Turn on her switch, and the devil that wearing 80 connects with the speaker (Phone, iPad, Laptop…..).
  • In the search interface on the device (phone) select ID “Dalton BT03” to process connect and play music.
    Press and hold the Pause/Play. button on speakers for 2-3s when users want to disconnect Bluetooth with a connecting device ( Phone).

Press and hold the Pause/Play button on speakers for 2-3s when users want to disconnect Bluetooth with a connecting device ( Phone).

STANDARD CALIBRATION LEVEL FOR DALTON SPEAKER

Dalton-K108A-Portable-Speaker-FIG-60

TECHNICAL ASSISTANCE

If you have any questions or need guidance, please contact the hotline: at 0941.009.559 during office hours for direct consultation.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in ao Have with the no guana, me at eternal it once o radio particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals