SHENZHEN JINGWEIXIAN TECHNOLOGY MINI Series Protector Film Cutter User Manual
- June 13, 2024
- Shenzhen Jingweixian Technology
Table of Contents
- SHENZHEN JINGWEIXIAN TECHNOLOGY MINI Series Protector Film Cutter
- Product Information
- Product Usage Instructions
- Standard Accessories
- Appearance and function
- Instructions
- WiFi Setting
- Start cutting
- Complete cutting
- Machine settings
- Bluetooth APP Control System
- Blade force/Speed/Automatic
- Specification
- Safety information
- Warranty card
- FCC
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SHENZHEN JINGWEIXIAN TECHNOLOGY MINI Series Protector Film Cutter
Product Information
Component | Description |
---|---|
Power button | Used to turn on the device |
Blade holder | Holds the cutting protector sheet film |
Blade holder clamp | Secures the blade holder in place |
Axis | Fixes the protector sheet film |
Sensor | Automatically feeds the sheet film |
Front cover | Protective cover for the device |
USB port interface | Allows connection to external devices via USB |
Power connector | Connects the device to a power source |
LCD Screen | Displays information and settings |
Value-added times | Additional features or functions |
Mini XR | Dimensions: 150mm x 120mm |
Bluetooth/WIFI | Supports wireless connectivity |
Weight | 2.1kg (without accessories), 3.1kg (with accessories) |
Product Usage Instructions
- Ensure the device is connected to a power source.
- Press the power button to turn on the device.
- Place the cutting protector sheet film onto the blade holder.
- Secure the blade holder in place using the blade holder clamp.
- Fix the protector sheet film onto the axis.
- If applicable, enable Bluetooth or WIFI connectivity.
- Use the LCD screen to navigate and adjust settings as needed.
- To connect external devices, utilize the USB port interface.
- When finished, turn off the device using the power button.
Note : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This user manual applies to all models of MINI series.
Standard Accessories
Appearance and function
- Power button: Turn on the device
- Blade holder: Cutting protector sheet film
- Blade holder clamp: fixed blade holder
- Axis: Fix the protector sheet film
- Sensor: Auto feed sheet film
- Front cover
- USB port interface
- Power connector
- LCD Screen
- Press the top to replace the blade.
- Blade adjustment: Rotate to adjust gear to control the length of the blade tip.
- Blade holde
- Blade tip: Adjust the exposure length accordingly to the material thickness. “+” direction means to lengthen blade tip; “_” direction means to shorten blade tip.
Instructions
Power on
- Connect the power supply with the adaptor and insert to the socket. Use 100-240V AC power supply to make the device operate normally.
- Insert the other end of the adaptor port into the power interface.
- Press the power button to power on the cutter.
Install the blade holder & blade
- Open the storage box
- Pull the paddle of holder clamp, adjust the length of the blade tip, and put the blade holder inside (Gear 5 for the blade holder is recommended).
- Push back the paddle and fix the blade holder.
- Cover the storage box.
Place materials
- Prepare a sheet film to be cut, confirm that the protective film is flat and the film layer is complete without bending, folding or missing layers
- Place the sheet film to the area shown.
- The machine will automatically pick up the film paper. lf need to exchange another sheet film, please click the power on button, the protector film will feed out.
Refer to the dotted line for the placement of sheet film Do not put your hands in the cutting area in case of harm
WiFi Setting
Click [2 Setting] on the homepage, enter the setting interface, click [WiFi Settings], connect to WiFi, enter the password, and wait for the machine to successfully connect to the WiFi network.
Start cutting
Select the brand and model of the device to be cut on the homepage and click [Start Cutting] to start cutting.
Complete cutting
The protector film will be pushed out when the cutting finished.
Machine settings
Language setting
On the homepage, click [ Setting] to enter the setting interface, and click
[Language Setting] to switch.
Blade force/Speed/Automatic
On the home page, click [ Setting] to enter the setting interface, click [Force/Speed/Automatic], please adjust according to actual usage.
Firmware system upgrade
- Tap [Setting] – [System information) on the homepage to update the firmware version. The password is 1212.
- Tap ID Setting] – [Restart] on the home page to restart cutter for data updating.
Self-help add cutting counting
Tap [Q Setting) – [Increment cutting amount) on the home page, and input
specific code to increase the cut amount.
Bluetooth APP Control System
- APP download link please check with seller.
- Power on the cutter 2. Run the mobile phone APP application, confirm that the mobile phone’s Bluetooth is turned on, find the Bluetooth name of the machine on the page, and then click it. Enter the pairing code 1234 to connect to Bluetooth, and then wait for the machine to successfully connect to Bluetooth.
Self-help add cutting counting
Tap [Value-added times] on the home page, and input a specific code to
increase the cut amount or scan the QR code.
Child lock
Choose the option [ Child Lock] , After clicking [Blade/Speed/Automatic) ,
activating the Child lock function Choose any model and hold on the button
“send” 3 seconds for sending to cut
Mirror function
Choose the options [ Mirror cutting 1 , After clicking [Blade/
Speed/Automatic], activating the Mirror cutting function.
Language settig
Tap I Setting] – [Language] on the home page, and choose the correct Language
for the cutter.
Blade force/Speed/Automatic
On the home page, click [ Setting] to enter the setting interface, click [Force/Speed/automatic], please adjust according to actual usage. (Speep 2, Force 3) If the auto feed function is not required, turn off automatic .
Firmware system upgrade
- Tap Setting – [System information 1 on the homepage to update the firmware version. The password is 1212.
- Tap Setting – [Restart] on the home page to restart cutter for data updating.
Specification
Safety information
Warranty card
Warranty description
Warranty notice
- This warranty card is requested to be kept by the user for maintenance certificate.
- The warranty period is valid for one year from the date of invoice.
- The warranty equipment must be non-artificially damaged and not repaired by personnel not authorized by the company.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation This device has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This device generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment