WHITE SHARK GPW 4006 Centurion PS 4 Wireless Controller User Manual

WHITE SHARK GPW 4006 Centurion PS 4 Wireless Controller User Manual

Before use

Carefully read this manual and any manuals for compatible hardware. Retain instructions for future reference.

Always update your system to the latest version of system software.

Precautions

Safety

• Avoid prolonged use of this product. Take a 15-minute break during each hour of play.

• Stop using this product immediately if you begin to feel tired or if you experience discomfort or
  pain in your hands or arms during use. If the condition persists, consult a doctor.
  If you experience any of the following health problems, discontinue use of the system immediately.
  If symptoms persist, consult a doctor.

  • Dizziness, nausea, fatigue or symptoms similar to motion sickness.
  • Discomfort or pain in a part of the body, such as eyes, ears, hands or arms. The product is intended for use with the hands only. Do not bring it into close contact with your head or face.

• The vibration function of this product can aggravate injuries. Do not use the vibration function if you have any ailment or injury to the bones, joints, or muscles of your hands or arms. You can turn on or turn off the vibration function from (setting) on the function screen.

• Permanent hearing loss may occur if the headset or headphones are used at high volume. Set the volume to a safe level. Over time, increasingly loud audio may start to sound normal but can actually be damaging your hearing. If you experience ringing or any discomfort in your ears or muffled speech, stop listening and have your hearing checked The louder the volume, the sooner your hearing could be affected. To protect your hearing:

  • Limit the amount of time you use the headset or headphones at high volume.
  • Avoid raising the volume to block out noisy surroundings
  • Lower the volume if you can’t hear people speaking near you.

• Avoid looking into the light bar of the controller when it is flashing. Stop using the controller immediately if you experience any discomfort or pain in any body parts.

• Keep the product out of the reach of small children. Young children might damage the product causing it to malfunction, swallow small parts, wrap the cables around themselves or accidentally injure themselves or others.
  Use and handling
  When using the controller be aware of the following points.

  • Before use, make sure that there is plenty of space around you.
  • Firmly grip your controller to prevent it from slipping out of your grasp and causing damage or injury.
  • When using your controller with a USB cable, ensure that the cable cannot hit a person or any object,and do not pull the cable out of the PlayStation4 system whilst playing.

• Do not allow liquid or small particles to get into the product.

• Do not allow touch the product with wet hands.

• Do not throw or drop the product or subject it to strong physical shock.

• Do not put heavy objects on the product.

• Do not touch the inside of the USB connector or insert foreign objects.

• Never disassemble or modify the product.

Exterior protection

Follow the instructions below to help prevent the product exterior from deteriorating or becoming discoloured.

• Do not place any rubber or vinyl materials on the product exterior for an extended period of time.
• Use a soft, dry cloth to clean the product. Do not use solvents or other chemicals. Do not wipe with a chemically-treated deaning doth.

Storage conditions

• Do not expose the product to high temperatures, high humidity or direct sunlight.
• Do not expose the product to dust, smoke or steam.

Pair your controller

You’ll need to pair your controller when you use it for the first time and when you use it with another PS4 system Tum on the PS4 system and connect the controller with the USB cable to complete device pairing.

Hint

When you press the button, the controller tums on and the light bar glows in your assigned color. The color that is assigned depends on the order in which each use presses the button. The first controller to connect is blue, with subsequent controllers glowing red, green, and pink. For details on using the controller, refer to the user’s guide of the P4 system.

Charging your controller

With the PS4 system turned on or in rest mode,connect your controller using the USB cable.

Hint

You can also charge your controller by connecting the USB cable to a computer or another USB device. Use a USB cable that complies with the USB standard. You might not be able to charge the controller on some devices.

Charging your controller

Caution-using the built-in battery:

• This product contains a lithium-ion rechargeable battery.
• Before using this product, read all instructions for handling and charging the battery and follow them carefully.
• Take extra care when handling the battery. Misuse can cause fire and burns.
• Never attempt to open, crush, heat or set fire to the battery.
• Do not leave the battery charging for a prolonged period of time when the product is not in use.
• Always dispose of used batteries in accordance with local laws or requirements.
• Do not handle the damaged or leaking battery.
• If the internal battery fluid leaks, stop using the product immediately and contact technical support for assistance. If the fluid gets on to your clothes, skin or into your eyes, immediately rinse the affected area with clean water and consult your doctor. The battery fluid can cause blindness.

Battery life and duration:

The battery has a limited life span. Battery charge duration gradually decreases with repeated usage and age. Battery life also varies depending on the storage method, usage state, environment and other factors.

Charge in an environment where the temperature range is between 10°C -30°C. Charging may not be as effective when performed in other environments. Battery duration may vary depending on the usage condition and environmental factors.

When not in use:

When the controller is not used for an extended period of time, it is recommended that you fully charge it at least once a year in order to maintain its functionality

Specifications

• Bluetooth version: 2.1 + ED
• Range: 8-10 m
• Compatibility: PS4 and PS3 – with USB cable Integrated speaker Sensor 6-axes
• Touch pad function
• Dual vibration motor Battery type/Capacity: Li-Polymer / 600 mA Using time: approx. 6-8 h
• Color: white
• Dimensions (mm): 165 x 110 x 63
• Weight: 200 g

WARRANTY CARD/JANSENIST LIST

ITEM/MODEL:
RECEIPT NO./DATE OF PURCHASE:
SELLING SPOT (COMPANY):
THE CUSTOMER:
WARRANTY PERIOD (MONTHS):
SIGNATURE / STAMP:

All White Shark products are examined and tested after each stage of the production process and have all the required certificates (ENC, CE…). The products are subject to the following warranty conditions: The warranty period for White Shark products is 24 months (on batteries 6 months) and begins on the day of being sold in the store The warranty can only be claimed upon presentation of the original purchase invoice and a filed warranty paper with a stamp from the store it was bought at and if the product has original packaging and all components and equipment. All malfunctioning of the product resulting from factory defects, that occur during the warranty period, and in the normal use of the product in compliance with all instructions will be removed. This warranty covers only defects in material and production. If the product malfunctions during the warranty period, your White Shark distributor will give you the product (after which is checked by a professional repaired or replaced If the repair at the authorized service center is not completed within 30 days of being received at the service center, we will replace the product with a new one. If the repair during the warranty period lasts longer than 15 days, the warranty period is extended by as many days as the repair lasted. If the device needs to be repaired within the warranty period, contact the store where you bought the product. If the product has to be sent to an authorized service center or general distributor, please send the product (with all parts and accessories) in the original packaging and with all the necessary documents (invoice, warranty card, etc.). The product can be repaired only in the authorized service center of the importer. The costs of shipping the product to the service center are funded by the customer. Possible damage to the product that can occur during transport is at the expense and risk of the buyer Sending the product from the service center to the customer is funded by the service technician/the importer This warranty does NOT cover: Damage or malfunctions that would occur as a result of incorrect connection, incorrect polarization, incorrect battery placement, etc. Defects caused by improper handling of products, use of parts or equipment that is not prescribed by our specifications, unauthorized product modification, and defects mechanical damage to the product Defects that can occur due to product fall, use of force, natural disasters (flood, fire, thunder, earthquake…), due to battery leakage, due to unstable 220V voltage, frequent variations and/or power outages, etc.. Damage caused during transport to the customer. Products have have been opened or repaired by an unauthorized person. Parts that are considered consumables such as batteries, etc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>