QEP 10202 Leave In Hard Style T Tile Spacers Instructions
- June 13, 2024
- QEP
Table of Contents
QEP 10202 Leave In Hard Style T Tile Spacers
Product Information
Product Name | Leave-In Hard Style T Tile Spacers |
---|---|
Product Numbers | 10202, 10203, 10204 |
Spacer Sizes | 1/16 (1.5 mm), 1/8 (3 mm), 3/16 (5 mm) |
Quantity | 10202: 300 each (24/cs) |
10203: 300 each (20/cs)
10204: 200 each (14/cs)
Product Usage Instructions
To achieve professional results with the Leave-In Hard Style T
Tile Spacers, follow these instructions:
- Prepare your tile installation area by cleaning and leveling the surface.
- Choose the appropriate spacer size based on your desired tile spacing:
- For a spacing of 1/16 inch (1.5 mm), use the spacer with product number 10202.
- For a spacing of 1/8 inch (3 mm), use the spacer with product number 10203.
- For a spacing of 3/16 inches (5 mm), use the spacer with product number 10204.
- Insert the selected spacer between tiles to maintain consistent spacing.
- Continue laying your tiles, using the spacers as needed.
- Once the tile installation is complete, allow the adhesive or grout to dry according to the manufacturer’s instructions.
- Once dry, remove the Leave-In Hard Style T Tile Spacers by gently pulling them out from between the tiles.
- Clean up any excess adhesive or grout from the tile surface.
- Enjoy your professionally spaced and installed tiles!
For more information and professional tools, visit our website at www.QEP.com.
- Product code: J2522-11858
Description
- Use as traditional vertical tombstone-style or inset leave-in installation method
- Leave-In design reduces installation time
- Will not compress when setting marble, granite, stone, and large format tile
- Easy to handle, extra long prongs ensure perfect 90° grout corners
Specifications
PRODUCT # | SIZE | QUANTITY |
---|---|---|
10202 | 1/16″ | 300 EACH (24/CS) |
10203 | 1/8″ | 300 EACH (20/CS) |
10204 | 3/16″ | 200 EACH (14/CS) |
How To Use
QEP® “T” Tile Spacers are designed for Subway, brick layout, or any offset tiling patterns and perimeters. “T” Tile Spacers provide consistent space or gap between tiles when installing them on the mortar, allowing for an even finish when it’s time to grout the tiles. Positioned into the corner of each tile, these spacers ensure a completely straight, even finish. Easy to use, simply place the spacers at each corner of the tiles when laying them down, then push the tiles together until the spacer is contacting each corner. Removing them shortly after installation, they can be rinsed and used again.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>