Ergotech 100-D16-B02W Space Saving Desk Stand Instruction Manual
- June 13, 2024
- Ergotech
Table of Contents
Ergotech 100-D16-B02W Space Saving Desk Stand
Product Information
The product is the 100 Series, designed and manufactured by Innovative Ergonomic Solutions. It is a versatile ergonomic solution for desktop setups.
The product consists of various components:
- Single Tier Pole – 16 (Part Number: 415749-16)
- Dual Tier Pole – 28 (Part Number: 415749-28)
- Desktop Base (Part Number: 415745)
- Clamp Mount (Part Number: 415756-BLK)
- Direct Mount (Part Number: 415748)
- Hinged Wings (Part Number: 415757)
- Standard Tilter (Part Number: 412445)
- Adjustable Tilter (Part Number: 412446)
- M4 x 10mm Screw
- Wing Cable Clip (Part Number: 112457)
- 3mm Allen Wrench
- 5mm Allen Wrench
- Pole Cable Clip (Part Number: 105445)
Product Usage Instructions
Installation Instructions
To install the 100 Series, follow these steps:
Desktop Base Installation
- Attach the Desktop Base (Part C) to either the Single Tier Pole – 16 (Part A) or Dual Tier Pole – 28 (Part B) using the provided 3mm Allen Wrench.
Clamp Mount Installation
- Attach the Clamp Mount (Part D) to either the Single Tier Pole – 16 (Part A) or Dual Tier Pole – 28 (Part B) using the provided 3mm Allen Wrench.
- Ensure that you have the required Desk Clamp (model # 415756) for the Clamp Mount. The Desk Clamp is sold separately.
Component Installation
- Install the first tier components (Part E or F) onto the Desktop Base or Clamp Mount, depending on your configuration.
- Install the second tier components (Part G or H) onto the first tier components, following your specific configuration.
Monitor Installation
To install the monitor on the Standard Tilter or Adjustable Tilter, follow
these steps:
Standard Tilter
- Lift the monitor from the bottom and tip it back slightly.
- Use your other hand to lift the top of the silver release button.
- Lift up and back to release the monitor from the stand.
Adjustable Tilter
- Lift the monitor from the bottom and tip it back slightly.
- Use your other hand to lift the top of the silver release button.
- Lift up and back to release the monitor from the stand.
Tilter Adjustments
Optional Tilter Adjustments
You can make optional adjustments to the tilt and rotation of the tilter:
Tilt Adjustment
- Use a 5mm hex key to adjust the tilt friction by tightening or loosening the hex screw on the side of the tilter.
- Secure the nut (13mm) located on the opposite side of the tilter while adjusting the hex screw.
Rotation Adjustment
- Use a 5mm hex key to adjust the rotation friction by tightening or loosening the hex screws at the top and bottom of the tilter.
Note: Depending on your 100 Series configuration, you may not receive all the parts mentioned above.
PARTS LIST
NOTE: DEPENDING ON YOUR 100 SERIES CONFIGURATION, YOU MAY NOT RECEIVE ALL
PARTS SHOWN BELOW.
DESKTOP BASE
**CLAMP MOUNT***
- Install first tier components first, followed by the second tier components per your specific configuration.
STANDARD TILTER
MONITOR RELEASE
Lift the monitor from the bottom and tip it back slightly while using the
other hand to lift the top of the silver release button. Lift up and back and
this will release the monitor from the stand.
ADJUSTABLE TILTER
MONITOR RELEASE
Lift the monitor from the bottom and tip it back slightly while using the
other hand to lift the top of the silver release button. Lift up and back and
this will release the monitor from the stand.
MONITOR HEIGHT FINE TUNE ADJUSTMENT
STANDARD TILTER & ADJUSTABLE TILTER
OPTIONAL TILTER ADJUSTMENTS
- Tilt Adjustment
- Tilt friction can be loosened or tightened by adjusting the 5mm hex key on the side of the tilter. Secure the nut (13mm), located on the opposite side of the tilter, while adjusting hex screw.
Rotation Adjustment
Rotation friction can be loosened or tightened by adjusting the hex screws at
the top and bottom of the tilter with a 5mm hex key.
Innovative Ergonomic Solutions 800 524 2744
customerservice@team-ies.com team-
ies.com
HAT Collective
408 437 8770
cs@hatcollective.com
hatcollective.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>