PERSANG Soundbox 2.0 Series Portable Speaker User Manual

PERSANG Soundbox 2.0 Series Portable Speaker

Product Information

Specifications

• Model: Soundbox 2.0 Bluetooth Speaker
• Speaker Type: 5.5 inch
• Microphone: 1 UHF Microphone
• Acoustical data:
  • Frequency Response: 40Hz-20KHz
  • Max SPL: 83dB (+/-3dB)
  • HF Driver: 13mm
  • LF Driver: 5.5 inch
  • Magnet: 10 oz
  • Voice Coil Impedance: 8 Ohm
• Amplifier:
  • Type: Class D
  • Power: 18W
• Line/Mic Input:
  • Stereo Input: 6.35 mono (Mic-In)
  • USB Media Reader: Yes
  • SD Media Reader: Yes
  • Bluetooth Input Connection: Yes
• Volume Controls:
  • Controls: 3 knobs (Mic, Line, Master)
  • Indicators: 2 LEDs (power, clip)
• Mains Connection: Type C cable
• Mechanics:
  • Housing: Polypropylene PP
  • Handles: 1 side
  • Dimensions (LxWxH): 17cm x 20cm x 25.5cm
  • Package Dimensions (LxWxH): 17cm x 22.5cm x 26.2cm
  • Net Weight: 2.5 kg
  • Gross Weight: 3.1 kg
• Accessories:
  • User Manual
  • Type C cable
• Warranty: 1 year domestic warranty for speaker, 6 months for battery

Product Usage Instructions

Powering the Speaker
To power on the Bluetooth speaker, connect the provided Type C cable to the mains connection and plug it into a power source. The power indicator LED should light up.

Bluetooth Connectivity
To connect your Bluetooth device to the speaker, follow these steps:

1. Make sure the speaker is powered on.
2. Enable Bluetooth on your device.
3. Search for available Bluetooth devices and select “Soundbox 2.0” from the list.
4. If prompted, enter the pairing code (if required).
5. Once connected, you can start playing audio through the speaker.

USB and SD Media Playback
The Soundbox 2.0 Bluetooth Speaker supports USB storage devices and SD cards for media playback. Follow these steps to play media from a USB or SD card:

1. Insert the USB storage device or SD card into the corresponding reader on the speaker.
2. Use the volume controls to select the desired media source (USB or SD).
3. Use the genre-specific EQ adjustment feature to enhance your audio experience.
4. Control the playback using your connected device or the media playback controls on the speaker.

Microphone Usage
The Soundbox 2.0 Bluetooth Speaker comes with a UHF microphone for convenient voice amplification. Follow these steps to use the microphone:

1. Connect the UHF microphone to the 6.35 mono (Mic-In) input on the speaker.
2. Adjust the microphone volume using the dedicated knob on the speaker.
3. Ensure the power LED for the microphone is lit up.
4. You can now speak into the microphone, and your voice will be amplified through the speaker.

Bass and Treble Adjustment
The Soundbox 2.0 Bluetooth Speaker allows you to adjust the bass and treble levels to suit your preferences. Follow these steps to adjust the bass and treble:

1. Locate the separate bass and treble control knobs on the speaker.
2. Turn the knobs clockwise to increase the respective levels or counterclockwise to decrease them.
3. Experiment with different settings until you achieve the desired sound quality.

Powering Off
To power off the speaker, disconnect the Type C cable from the mains connection or turn off the power source.

FAQ

• Q: Can I connect multiple Bluetooth devices to the speaker at the same time?
  A: No, the Soundbox 2.0 Bluetooth Speaker can only connect to one Bluetooth device at a time. To switch devices, disconnect the current device and connect the desired device.

• Q: Can I use the speaker without connecting it to a power source?
  A: No, the Soundbox 2.0 Bluetooth Speaker requires a power source to function. It cannot operate on battery power alone.

• Q: How far is the Bluetooth range of the speaker?
  A: The Bluetooth range of the Soundbox 2.0 Bluetooth Speaker is approximately 33 feet (10 meters) in an open space. However, the range may vary depending on environmental factors and interference.

• Q: Can I use the speaker as a standalone amplifier without Bluetooth or media playback?
  A: Yes, you can use the Soundbox 2.0 Bluetooth Speaker as a standalone amplifier by connecting external audio sources to the Line/Mic Input using compatible cables.

SYSTEM FEATURES

• Built-in bluetooth player also supports USB storage devices and includes multiple genre specific for instant EQ adjustment
• All-in-one high-power class D amplifier
• Separate bass and treble control for precise adjustment

SOUNDBOX 2.0
5.5″ BLUETOOTH SPEAKER

DIMENSIONS

DIMENSIONS (CM)

SPECIFICATIONS

• Model SOUNDBOX 2.0
• Speaker Type Bluetooth Speaker
• Microphone 1 UHF Microphone

Acoustical data

• Frequency Response 40Hz-20KHz
• Max SPL 83dB (+/-3dB)
• HF 13mm. Driver
• LF 5.5 inch
• Magnet 10 oz
• Voice Coil 1″ KSV
• Impedance 8 Ohm

Amplifier

• AMP Class D
• Power 18W
• Line/Mic Input 6.35 mono (Mic-In) 3.5 mono
• Stereo Input 6.35 mono

USB Media Reader

• SD Media Reader YES
• Bluetooth Input YES
• Connection 6.35 mono (Mic-In) 3.5 mono
• Volume Controls 3* knobs(Mic,Line,Master)
• Controls Master volume
• Indicators 2*LEDs(power,clip)
• Mains connection Type C cable

Mechanics

• Housing Polypropylene PP
• Handles 1*side
• Dimensions (LxWxH) 17 20 25.5 cm
• Package Dimensions (LxWxH) 17 22.5 26.2 cm
• Net Weight 2.5 kg
• Gross Weight 3.1 kg

Accessories

• user manual
• Type C cable

Warranty

• 1-year domestic warranty for speaker, 6 months for battery

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>