BOSCH AdvancedVac 18V-8 Cordless Wet and Dry Vacuum Cleaner Instruction Manual

: June 13, 2024
: Bosch

Table of Contents

AdvancedVac 18V-8 Cordless Wet and Dry Vacuum Cleaner
Safety instructions for vacuum cleaners
Product description and specifications
Assembly
Operation
Maintenance and Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AdvancedVac 18V-8

BOSCH AdvancedVac 18V 8 Cordless Wet and Dry Vacuum Cleaner -
cover

Original instructions

AdvancedVac 18V-8 Cordless Wet and Dry Vacuum Cleaner

BOSCH AdvancedVac 18V 8 Cordless Wet and Dry Vacuum Cleaner - overview
1

BOSCH AdvancedVac 18V 8 Cordless Wet and Dry Vacuum Cleaner - overview
3

BOSCH AdvancedVac 18V 8 Cordless Wet and Dry Vacuum Cleaner - overview
4

BOSCH AdvancedVac 18V 8 Cordless Wet and Dry Vacuum Cleaner - overview
5

Safety instructions for vacuum cleaners

**** Read all the safety information and instructions. Failure to observe the safety information and follow instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.

This vacuum cleaner is not intended for use by children or persons with physical, sensory or mental impairments. It should not be used by persons who have insufficient experience and knowledge. Otherwise, there is a risk of operating errors and injuries.
Supervise children. This will ensure that children do not play with the vacuum cleaner.
Do not use damaged filters (e.g. no cracks, small holes, etc.). Replace any damaged filters immediately.
Before using the equipment for the first time, check that the vacuum hose is in perfect condition. Leave the vacuum hose fitted to the vacuum cleaner while doing this so that no dust escapes accidentally. Otherwise, you may end up inhaling dust particles.

WARNING Do not vacuum any harmful substances, e.g. beech or oak wood dust, rock dust or asbestos. These substances are considered carcinogenic. Make sure you inform yourself
about the applicable regulations/laws on how to handle harmful types of dust in your country.

Do not use the vacuum cleaner to vacuum combustible or explosive liquids, such as petrol, oil, alcohol or solvents. Do not vacuum hot, burning or explosive dust. Do not operate the vacuum cleaner in areas subject to explosion hazards. Dust, vapours and liquids can ignite or explode.

WARNING If you notice a foam or water leak, switch off the vacuum cleaner immediately and empty the container. Otherwise, the vacuum cleaner can become damaged.

Do not open the battery. There is a risk of short-circuiting.
In case of damage and improper use of the battery, vapours may be emitted. The battery can set alight or explode.
Ensure the area is well ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system.
If used incorrectly or if the battery is damaged, flammable liquid may be ejected from the battery. Contact with this liquid should be avoided.
If contact accidentally occurs, rinse off with water. If the liquid comes into contact with your eyes, seek additional medical attention. Liquid ejected from the battery may cause
irritation or burns.
The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.
When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws or other small metal objects that could make a connection from one terminal to another.
A short circuit between the battery terminals may cause burns or a fire.
Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload.
Only charge the batteries using chargers recommended by the manufacturer. A charger that is suitable for one type of battery may pose a fire risk when used with a different battery.
Protect the battery against heat, e.g. against continuous intense sunlight, fire, dirt, water and moisture. There is a risk of explosion and short- circuiting.

Product description and specifications

Intended use
The dust extractor is intended for extracting and blowing out materials that are not harmful to health, as well as for extracting non-flammable liquids.
The dust extractor is intended only for private use and not for commercial use.
Only use the dust extractor if you can fully evaluate all functions and carry them out without restrictions, or if you have received corresponding instructions.

Product features
The numbering of the product features refers to the representation of the vacuum cleaner on the graphic pages.

(1) Container
(2) Extraction hose adapter
(3) Carrying handle
(4) ECO button
(5) On/off button
(6) Battery charge indicator
(7) Retaining strap
(8) Battery compartment cover
(9) Top part of dust extractor
(10) Catch for top part of dust extractor
(11) Castor a)
(12) Blowing hose adapter
(13) Mount for accessories bracket
(14) Battery compartment cover handle
(15) Running castor a)
(16) Battery bay
(17) Rechargeable battery a)
(18) Accessories bracket a)| (19) Locking tab
(20) Curved nozzle
(21) Universal adapter
(22) Vacuum hose (1.8 m)
(23) Inflation adapter
(24) Dust bag holder
(25) Dust bag
(26) Fleece bag a)
(27) Filter holder
(28) Fixing lever
(29) Main filter
(30) Fill level sensor
(31) False air intake
(32) Snap fastener
(33) Extension tube a)
(34) Floor nozzle a)
(35) Crevice nozzle
(36) Brush a)
---|---

a) Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.

Technical data

Cordless wet/dry vacuum cleaner		AdvancedVac 18V-8
Article number		3 603 CE1 0..
Container volume (gross)	l	8

Assembly

Battery Charging

Use only the chargers listed in the technical data. Only these chargers are matched to the lithium-ion battery of your power tool.
The lithium-ion battery can be charged at any time without reducing its service life. Interrupting the charging process does not damage the battery.
The lithium-ion battery is protected against deep discharge by the “Electronic Cell Protection (ECP)”. A protective circuit switches the cordless dust extractor off when the battery is drained.
Do not continue to press the on/off switch after the tool has been automatically switched off. This can damage the battery.
The battery must be removed from the vacuum cleaner to charge it.
The battery features NTC temperature monitoring, which only permits charging in a temperature range between 0 °C and 45 °C. This achieves a long battery life.
A significantly reduced operating time after charging indicates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.

Battery charge indicator
The three green LEDs of the battery charge indicator (6) indicate the state of charge of the battery (17). The indicator lights up continuously after starting operation.
If no LED lights up after switching on, the battery is defective and must be replaced. Error Indicator

Detection of rectifiable errors: 3 LEDs flash
▪ The battery is overheated
▪ The container is full of water
Detection of non-rectifiable errors: The middle LED flashes
▪ The electric circuit to the motor is interrupted
▪ The protective resistor has triggered

Inserting and Removing the Battery (see figure A)

Do not use force to insert the battery. The battery is designed in such a way that it can only be inserted into the vacuum cleaner when it is in the right position.
– Slide the rechargeable battery (17) all the way into the battery bay (16).
– To remove the rechargeable battery (17), press the release buttons on the rechargeable battery and pull it out of the battery bay (16).

Fitting Bracket for Extractor Accessories (see figure B)
Insert the accessories bracket (18) for extractor accessories into the adapter (13) provided.
The accessories bracket (18) contains the 3 extension tubes (33), the universal adapter (21), the curved nozzle (20), the crevice nozzle (35) and the inflation adapter (23).
The accessories bracket (18) can also be fastened to a wall with 2 screws.
The floor nozzle (34) can be hooked both on the dust extractor directly (see figure C) and on the accessories bracket (18) (see figure D).

Fitting the Extraction Accessories
Fitting the Dust Extraction Adapter or Curved Nozzle (see figure E)
Put the universal adapter (21) or the curved nozzle (20) on the vacuum hose (22) and turn the universal adapter (21) or the curved nozzle (20) until you hear it click into place.
For disassembly, press the pushbutton (32) inwards and pull the components apart.

Fitting the Nozzles and Tubes
If required, interlock the extension tubes (33) and then fix to the curved nozzle (20).
Fix the floor nozzle (34), the crevice nozzle (35) or the brush (36) to the other end of the extension tube (33) or the curved nozzle (20).
The inflation adapters (23) can also be put on the curved nozzle (20).

Fitting the vacuum hose
Extraction Function (see figure F)
Push the vacuum hose (22) into the hose connection piece (2) and turn it as far as possible in the direction of rotation .

Blowing Function (see figure G)
Put the vacuum hose into the rear hose adapter (12) and turn it all the way in the rotational direction .

Replacing/Inserting Dust Bag (see figure H) (accessories)
Open the catches (10) and remove the top part of the dust extractor (9).
Remove the dust bag holder (24). Put the dust bag (25) on the dust bag holder (24) and insert the dust bag (25) with the dust bag holder (24) into the container (1).
Put the top part of the dust extractor (9) back on and connect the container (1) with the top part of the dust extractor (9) by closing the catches (10).

Changing the Main Filter (see figure I)
Note: When replacing the filter, make sure that no dust gets into the motor housing.
Press the fixing lever of the filter holder (28) towards the main filter (29) and remove the filter holder (27) with the filter. Remove the filter (29) from the filter holder (27).
To insert a new filter, place the filter (29) with the filter folds down into the filter holder (27). Insert the filter holder (27) with the filter (29) into the top part of the dust extractor (9).
Attaching the Vacuum Hose to the Dust Extractor (see figure J)
Wrap the fitted vacuum hose (22) around the dust extractor.
Pull up the retaining strap (7) and hook it into the holder.

Operation

Starting Operation

Before extraction, ensure that the filter unit is securely fitted.
Do not use damaged filters (e.g. no cracks, small holes, etc.). Replace any damaged filters immediately.

Switching On and Off
To switch on the dust extractor, press the on/off button (5).
Press the ECO button (4) to extend the rechargeable battery runtime.
To switch off the dust extractor, press the on/off button (5) again.

ECO Mode
When ECO mode is activated, the suction power is reduced in order to increase battery runtime (see “Technical data”, page 13).

Dry Extraction
Use a dust bag for dry extraction if possible (accessories).
If the dust bag is full, replace it with a new dust bag.

Check the dust bag each time after using.
Extracting Dust that Accumulates from Working Power Tools (see figure L)
There must be a sufficient air exchange rate (L) in the room when the exhaust air comes back into the room.
Be aware of the corresponding national regulations.

Fit the universal adapter (21).
Insert the universal adapter (21) into the extraction outlet of the power tool.
Note: When working with power tools that have a low air feed into the vacuum hose (e.g. jigsaws, sanders, etc.), the false air intake (31) of the universal adapter (21) must be opened. This will improve the total output of the dust extractor and the power tool. To do this, turn the ring above the false air intake (31) until the opening is at its maximum size.

Wet Extraction
• The vacuum cleaner must not be used as a water pump. The vacuum cleaner is designed for vacuuming air and vacuuming water mixtures.

Steps to Take before Wet Extraction
Empty and clean the container (1). A dust bag (25) must not be used.
Clean the fill level sensors (30) using a soft cloth (see figure I).
Fit a suitable nozzle.

Vacuuming up Liquids
Switch on the dust extractor using the on/off button (5).
The dust extractor is equipped with fill level sensors (30) (see figure J). The dust extractor shuts down if the maximum fill level has been reached.
Note: When extracting non-conductive liquids (e.g. drilling emulsion, oils and fats), the dust extractor will not switch off when the container is full. The fill level must be constantly monitored and the container emptied in good time.

Steps to Take after Wet Extraction
Empty the container (1).
To avoid mould formation, remove the top part of the dust extractor (9), open the filter holder (27), take out the filter (29) and let everything dry well.

Inflating/Blowing out (see figure G)

The vacuum cleaner has a blowing function. Do not blow exhaust air out into the open air. Only use the blowing function with a clean hose. Dust can be hazardous to health.

Use the hose adapter (12) on the back for the blowing function.
Fit the hose on the rear hose adapter (12).
Connect the other end of the hose with the universal adapter (21) and one of the 3 inflation adapters (23) in order to inflate an object (e.g. an air mattress) or use the dust extractor with the extension tubes (33) as a leaf blower in the garden.
Switch on the dust extractor using the on/off button (5).
Inflated objects can be deflated again with the extraction function of the dust extractor.

Maintenance and Service

Maintenance and Cleaning

Remove the battery before cleaning or performing maintenance on the dust extractor, making tool adjustments, changing accessories or placing the dust extractor in storage. his safety measure prevents the dust extractor from being started accidentally.
To ensure safe and efficient operation, always keep the dust extractor and the ventilation slots clean.

Regular cleaning increases the service life of the dust extractor and ensures optimal suction power. If normal suction power is not achieved after cleaning, the dust extractor
should be sent to the after-sales service.

Cleaning the Container
Wipe the container (1) from time to time using a non-abrasive commercially available cleaning product and leave it to dry.

Cleaning the Filters
Remove the filter (29) from the filter holder (27).
Knock out the filter (29) over a suitable waste bin (see figure K).
Reinsert the filter (29) with the filter holder (27).

Cleaning Fill Level Sensors
Clean the fill level sensors (30) occasionally.
Clean the fill level sensors (30) using a soft cloth (see figure I).

After-Sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com You can find further service addresses at:
www.bosch-pt.com/serviceaddresses

Transport
The recommended lithium-ion batteries are subject to legislation on the transport of dangerous goods. The user can transport the batteries by road without further requirements.
When shipping by third parties (e.g.: by air transport or forwarding agency), special requirements on packaging and labelling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required.
Dispatch battery packs only when the housing is undamaged. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. Please also observe the possibility of more detailed national regulations.

Disposal
Vacuum cleaners, batteries, accessories and packaging should be sorted for environmentally friendly recycling.
Do not dispose of vacuum cleaners or battery packs/batteries with household waste.

Only for EU countries:
According to the Directive 2012/19/EU on waste electrical and electronic equipment and its transposition into national law, dust extractors that are no longer usable, and, according to the Directive 2006/66/EC, defective or drained batteries must be collected separately and disposed of in an environmentally correct manner.
If disposed incorrectly, waste electrical and electronic equipment may have harmful effects on the environment and human health, due to the potential presence of hazardous substances.

Only for United Kingdom:
According to Waste Electrical and Electronic Equipment Regulations 2013 (2013/3113) and the Waste Batteries and

Accumulators Regulations 2009 (2009/890), vacuum cleaners that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.

Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport (see “Transport”, page 16).

Accumulators Regulations 2009 (2009/890), vacuum
cleaners that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.

Battery packs/batteries: Li-ion: Please observe the notes in the section on transport (see “Transport”, page 16).

BOSCH AdvancedVac 18V 8 Cordless Wet and Dry Vacuum Cleaner - overview
6