TECHKO STL-315 Solar Wall Light User Manual

June 13, 2024
TECHKO

**TECHKO STL-315 Solar Wall Light User Manual


**

PLEASE FULLY CHARGE THE PRODUCT BEFORE USING

  1. Please turn “ON” the product and fully charge under direct sunlight before use.
  2. Charging time may vary depending on the weather, temperature, and seasons.
  3. Do not charge the product indoors or any place where direct sunlight can’t reach. Otherwise, the product will not charge properly.
  4. Avoid scratching the panel or it may lower charging efficiency.

WALL MOUNTING THE LIGHT

The product can be hung as desired.
Please make sure the location where the unit is to be installed has enough space for it to fit in before installing.

  1. Place the mounting sticker in a location where the product will be installed to. Then drill 2 holes into the guides shown on the mounting sticker.
    Wall Mounting Light

  2. Insert the supplied anchors into the drilled holes.
    Wall Mounting Light

  3. Use a screwdriver to secure the supplied screws into the anchors. Leave enough of the screw threads exposed as this will be used to mount the unit.
    Wall Mounting Light

  4. Hang the unit as desired on the installed screws corresponding to the holes behind the unit.  **(see Figure A)
    Wall Mounting Light

**

  • Please carefully read this manual before using the product.
  • Keep this manual with you for reference as needed.
  • Please install the unit in a place where the solar panel can be continually exposed to the sun.
  • Avoid placing the unit where shade from buildings or objects would block the solar panel.

INSTALLING THE LIGHT BULB & REPLACING THE LIGHT BULB

Installation

  1. Remove the solar panel top cap.
  2. Screw the light bulb into the light socket located on the underside of the solar panel top cap.
  3. Replace the lightbulb with the recommended LED bulb.

POWER BUTTON & OPERATING INSTRUCTIONS

  1. The power button is located on the underside of the solar panel top cap. (See Figure B)
    Power Button

  2. Remove the solar panel top cap to access the power button, press the button to turn the solar light to high brightness setting.

  3. Press the power button again to turn the solar light to low brightness setting.

  4. Press the power button again to turn the solar light off.

  5. The solar light is equipped with a daylight sensor; it will automatically charge during the day and turn on the LED light bulb at dusk or when the surrounding area turns dark.

WARNING & NOTICE

  1. Do not look directly at the LED lights, or it may damage your eyes.
  2. Do not attempt to disassemble or remodel the product. Any changes can be dangerous and will void the warranty.
  3. Please keep away from any flammable items, or explosion, property damages, or casual injuries may occur.
  4. Please install the product according to the user manual.

PRODUCT SPECIFICATION

Material Aluminum / Glass Solar Panel 4.3×4.3 inches/2W
Battery Li-ion battery 18650 2000mAh Waterproof Performance pgs
Lightbulb A60 Filament LED bulb 3V/2W / Glass Accessories 1*Solar wall

light Screws / 2Anchors 1Mounting sticker 1*User manual
Size| 4.73 x4.73×8.78 inches

This product has a 1-year limited warranty. For further information please visit our website at www.techkogroup.com

Copyright Reserved

Model: STL-315

[email protected]

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

TECHKO User Manuals

Related Manuals