1HORA GAR151 15W Wireless Charger User Manual

1HORA GAR151 15W Wireless Charger

Product Information

This device is designed to comply with part 15 of the FCC Rules, ensuring that it does not cause harmful interference and accepts any interference received. It also meets FCC radiation exposure limits for an uncontrolled environment.

FCC Warning Statement:
This device complies with part 15 of the FCC Rules. It must not cause harmful interference and must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment.

FCC RF Exposure Statement:
The equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This ensures compliance with FCC radiation exposure limits for an uncontrolled environment.

Product Usage Instructions

1. Ensure that the device is placed at least 20cm away from your body.
2. Do not modify or make any changes to the device that are not expressly approved by the responsible party.
3. Operate the device in accordance with part 15 of the FCC Rules, avoiding any actions that may cause harmful interference.
4. If you experience any undesired operation or interference, try adjusting the positioning of the device or contacting the responsible party for assistance.

WIRELESS CHARGE

The fast charging wireless charger is an efficient product for charging your devices, with a compact and elegant design for compatibility with any mobile device that allows wireless charging. Adopting high-end fast charging IC, it can be perfectly compatible with various brands, to further save charging time by improving user experience.

PRODUCT STRUCTURE

COMPATIBLE DEVICES

1. Devices with built-in fast charging/ regular wireless charging receiver (Samsung Note 8, iPhone 8, etc.)
2. Devices with external wireless charging receiver (Samsung Galaxy S3, S4, S5, Note 3, Note 4, HUAWEI, LENOVO, XIAOMI, etc.)
3. Devices with wireless charging receiver for iPhone 5 / Ss, iPhone 6, iPhone 6p, etc. (Can be used with a protective case bet ween the external receiver).

INSTRUCTIONS

1. Plug the USB port into the power adapter and connect with the wall charger, as it’s shown in the following.

2. Insert the end of the cable USB Type Cinto the wireless charger, the LED frame will light up to indicate the electrical connection.

3. Place your phone on the wireless charger. Make sure the phone is properly placed on the wireless charger’s charging area. When the phone is being charged, the LED frame will automatically tum blue to show a charging status.

4. Place the phone in the center of the wireless charger to ensure stable charging. Do not put magnetic and metal accessories or cards on the charger.

CONTENTS

• WIRELESS CHARGER
  Input: 5V-2AJ9V-2A

• TYPECCABLE
  Output: 5W/7.5W/10W/15W

• USER MANUAL
  Efficiency: 70% -85%

ATTENTION

1. Keep the charger away from water or other liquids.
2. If you need to move the charger, make sure it is turned off.
3. Use the device at an ambient temperature of 1 to 45 degrees.

FCC Warning statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received ,including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>